Remove non-Keychron keyboards

7 files changed, 0 insertions, 261 deletions

diff --git a/keyboards/matchstickworks/southpad/config.h b/keyboards/matchstickworks/southpad/config.h
deleted file mode 100644
index 3e11e34467..0000000000
--- a/keyboards/matchstickworks/southpad/config.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
-Copyright 2021 Logan Butler
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 4
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B3, B5, B6, B7, C7, C6 }
-#define MATRIX_COL_PINS { B0, B1, B2, B4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/matchstickworks/southpad/info.json b/keyboards/matchstickworks/southpad/info.json
deleted file mode 100644
index d7380644ff..0000000000
--- a/keyboards/matchstickworks/southpad/info.json
+++ /dev/null
@@ -1,43 +0,0 @@
-{
-    "keyboard_name": "SouthPad",
-    "manufacturer": "MatchstickWorks",
-    "url": "",
-    "maintainer": "MatchstickWorks",
-    "usb": {
-        "vid": "0xFEED",
-        "pid": "0x6060",
-        "device_version": "0.0.1"
-    },
-    "layouts": {
-        "LAYOUT_numpad_6x4_southpaw": {
-            "layout": [
-                {"label":"Bksp", "x":0, "y":0},
-                {"label":"=", "x":1, "y":0},
-                {"label":"(", "x":2, "y":0},
-                {"label":")", "x":3, "y":0},
-
-                {"label":"-", "x":0, "y":1},
-                {"label":"*", "x":1, "y":1},
-                {"label":"/", "x":2, "y":1},
-                {"label":"Num Lock", "x":3, "y":1},
-
-                {"label":"9", "x":1, "y":2},
-                {"label":"8", "x":2, "y":2},
-                {"label":"7", "x":3, "y":2},
-
-                {"label":"+", "x":0, "y":2, "h":2},
-                {"label":"6", "x":1, "y":3},
-                {"label":"5", "x":2, "y":3},
-                {"label":"4", "x":3, "y":3},
-
-                {"label":"3", "x":1, "y":4},
-                {"label":"2", "x":2, "y":4},
-                {"label":"1", "x":3, "y":4},
-
-                {"label":"Enter", "x":0, "y":4, "h":2},
-                {"label":".", "x":1, "y":5},
-                {"label":"0", "x":2, "y":5, "w":2}
-            ]
-        }
-    }
-}
diff --git a/keyboards/matchstickworks/southpad/keymaps/default/keymap.c b/keyboards/matchstickworks/southpad/keymaps/default/keymap.c
deleted file mode 100644
index 5ffd3ef21a..0000000000
--- a/keyboards/matchstickworks/southpad/keymaps/default/keymap.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Copyright 2021 Logan Butler
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_numpad_6x4_southpaw( /* Base */
-        KC_BSPC, KC_EQL,  KC_LPRN, KC_RPRN,
-        KC_PMNS, KC_PAST, KC_PSLS, KC_NLCK,
-                 KC_P9,   KC_P8,   KC_P7,
-        KC_PPLS, KC_P6,   KC_P5,   KC_P4,
-                 KC_P3,   KC_P2,   KC_P1,
-        KC_PENT, KC_PDOT,          KC_P0
-    ),
-};
diff --git a/keyboards/matchstickworks/southpad/readme.md b/keyboards/matchstickworks/southpad/readme.md
deleted file mode 100644
index 8c8007c2e7..0000000000
--- a/keyboards/matchstickworks/southpad/readme.md
+++ /dev/null
@@ -1,23 +0,0 @@
-# SouthPad
-
-![Southpad](https://i.imgur.com/Wl71thnh.jpg)
-
-This is a left-handed (or mirrored) numberpad with USB-C connections.
-
-Default layout is such:
-
-![SouthPad Layout](https://i.imgur.com/jc7T2jl.jpg)
-
-* Keyboard Maintainer: [Logan Butler](https://github.com/MatchstickWorks)
-* Hardware Supported: SouthPad PCB
-* Hardware Availability: Either via [my Etsy Store](https://www.etsy.com/shop/MatchstickWorksShop) or by messaging directly
-
-Getting the board into bootloader mode:
-
-In order to flash the firmware to this board, simply press the Reset button on the back of the PCB. You should head a USB disconnect and reconnect sound shortly following.
-
-Make example for this keyboard (after setting up your build environment):
-
-    make matchstickworks/southpad:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/matchstickworks/southpad/rules.mk b/keyboards/matchstickworks/southpad/rules.mk
deleted file mode 100644
index 5ce64a46c3..0000000000
--- a/keyboards/matchstickworks/southpad/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-# MCU name
-MCU = atmega32u2
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
diff --git a/keyboards/matchstickworks/southpad/southpad.c b/keyboards/matchstickworks/southpad/southpad.c
deleted file mode 100644
index 52c9c1e6b1..0000000000
--- a/keyboards/matchstickworks/southpad/southpad.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Copyright 2021 Logan Butler
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "southpad.h"
diff --git a/keyboards/matchstickworks/southpad/southpad.h b/keyboards/matchstickworks/southpad/southpad.h
deleted file mode 100644
index bdfb11bdd0..0000000000
--- a/keyboards/matchstickworks/southpad/southpad.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* Copyright 2021 Logan Butler
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "quantum.h"
-
-/* This a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT_numpad_6x4_southpaw( \
-    k00, k01, k02, k03, \
-    k10, k11, k12, k13, \
-         k21, k22, k23, \
-    k20, k31, k32, k33, \
-         k41, k42, k43, \
-    k40, k51,   k53     \
-) \
-{ \
-    { k00,   k01, k02,   k03 }, \
-    { k10,   k11, k12,   k13 }, \
-    { k20,   k21, k22,   k23 }, \
-    { KC_NO, k31, k32,   k33 }, \
-    { k40,   k41, k42,   k43 }, \
-    { KC_NO, k51, KC_NO, k53 }  \
-}
-