should have fixed conflixed

10 files changed, 7 insertions, 177 deletions

diff --git a/keyboards/lets_split/Makefile b/keyboards/lets_split/Makefile
index 6ce6e43731..4e2a6f00fd 100644
--- a/keyboards/lets_split/Makefile
+++ b/keyboards/lets_split/Makefile
@@ -1,82 +1,3 @@
-<<<<<<< HEAD
 ifndef MAKEFILE_INCLUDED
-=======
-SRC += matrix.c \
-	   i2c.c \
-	   split_util.c \
-	   serial.c
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= yes           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-USE_I2C ?= yes
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
-
-CUSTOM_MATRIX = yes
-SUBPROJECT_DEFAULT = rev2
-ifndef QUANTUM_DIR
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 	include ../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h
index 91b11f03fd..1b7bbcbbb9 100644
--- a/keyboards/lets_split/config.h
+++ b/keyboards/lets_split/config.h
@@ -61,20 +61,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-<<<<<<< HEAD
-=======
-<<<<<<< HEAD
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
+
 #ifdef SUBPROJECT_rev1
     #include "rev1/config.h"
 #endif
 #ifdef SUBPROJECT_rev2
     #include "rev2/config.h"
 #endif
-#endif
-<<<<<<< HEAD
-=======
-
-
-
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
+#endif
\ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/default/keymap.c b/keyboards/lets_split/keymaps/default/keymap.c
index 41b9b8d8ff..6f1f71f5f8 100644
--- a/keyboards/lets_split/keymaps/default/keymap.c
+++ b/keyboards/lets_split/keymaps/default/keymap.c
@@ -29,7 +29,6 @@ enum custom_keycodes {
 #define XXXXXXX KC_NO
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-<<<<<<< HEAD
 
 /* Qwerty
  * ,-----------------------------------------------------------------------------------.
@@ -83,29 +82,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
   KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
   ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-=======
-[0] = KEYMAP( \
-  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL, \
-  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-  KC_LCTL, _LOWER, KC_LGUI, KC_LALT, MO(_LOWER),   KC_SPC,  KC_SPC,  MO(_RAISE),   KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 ),
 [3] = KEYMAP( \
   KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
-<<<<<<< HEAD
   _______, _______, _______, _______, _______, KC_BSPC, MT(MOD_LSFT, KC_BSPC), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-=======
-  _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 ),
 [4] = KEYMAP( \
   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, \
   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
-<<<<<<< HEAD
   _______, _______, _______, _______, _______, KC_ENT, MT(MOD_LSFT, KC_ENT), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
 ),
 
@@ -126,12 +113,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _______, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______, _______, _______, \
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
 )
-
-
-=======
-  _______, _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 };
 
 #ifdef AUDIO_ENABLE
diff --git a/keyboards/lets_split/lets_split.c b/keyboards/lets_split/lets_split.c
index 8bb33f9514..117b727a85 100644
--- a/keyboards/lets_split/lets_split.c
+++ b/keyboards/lets_split/lets_split.c
@@ -1,6 +1 @@
-#include "lets_split.h"
-
-<<<<<<< HEAD
-=======
-
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
+#include "lets_split.h"
\ No newline at end of file
diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h
index da5b476733..825e5ec245 100644
--- a/keyboards/lets_split/rev1/config.h
+++ b/keyboards/lets_split/rev1/config.h
@@ -25,11 +25,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID      0x3060
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Wootpatoot
-<<<<<<< HEAD
 #define PRODUCT         Lets Split
-=======
 #define PRODUCT         Lets Split v1
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 #define DESCRIPTION     A split keyboard for the cheap makers
 
 /* key matrix size */
@@ -44,15 +41,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define CATERINA_BOOTLOADER
 
 // #define USE_I2C
-
-<<<<<<< HEAD
 // Use serial if not using I2C
 #ifndef USE_I2C
 #  define USE_SERIAL
 #endif
 
-=======
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 // #define EE_HANDS
 
 #define I2C_MASTER_LEFT
@@ -80,21 +73,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* ws2812 RGB LED */
-<<<<<<< HEAD
-#define RGB_DI_PIN D4
-#define RGBLIGHT_TIMER
-#define RGBLED_NUM 8     // Number of LEDs
-=======
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
-#define ws2812_pin PD1
-#define RGBLED_NUM 28     // Number of LEDs
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -113,8 +91,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-<<<<<<< HEAD
-#endif
-=======
 #endif
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
diff --git a/keyboards/lets_split/rev1/rev1.c b/keyboards/lets_split/rev1/rev1.c
index 41dd1e3535..c505d3a6e3 100644
--- a/keyboards/lets_split/rev1/rev1.c
+++ b/keyboards/lets_split/rev1/rev1.c
@@ -24,15 +24,9 @@ void matrix_init_kb(void) {
 };
 
 void shutdown_user(void) {
-<<<<<<< HEAD
     #ifdef AUDIO_ENABLE
         PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
 	_delay_ms(150);
 	stop_all_notes();
     #endif
-=======
-    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
-    _delay_ms(150);
-    stop_all_notes();
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 }
diff --git a/keyboards/lets_split/rev1/rev1.h b/keyboards/lets_split/rev1/rev1.h
index 998b2be7c7..4667c9fb09 100644
--- a/keyboards/lets_split/rev1/rev1.h
+++ b/keyboards/lets_split/rev1/rev1.h
@@ -1,15 +1,12 @@
 #ifndef REV1_H
 #define REV1_H
 
-<<<<<<< HEAD
 #include "../lets_split.h"
 
 //void promicro_bootloader_jmp(bool program);
-=======
 #include "quantum.h"
 
-void promicro_bootloader_jmp(bool program);
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
+//void promicro_bootloader_jmp(bool program);
 
 #define KEYMAP( \
 	k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \
diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h
index 19c137e56c..e9689d773d 100644
--- a/keyboards/lets_split/rev2/config.h
+++ b/keyboards/lets_split/rev2/config.h
@@ -41,14 +41,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // #define USE_I2C
 
-<<<<<<< HEAD
 // Use serial if not using I2C
 #ifndef USE_I2C
 #  define USE_SERIAL
 #endif
 
-=======
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 // #define EE_HANDS
 
 #define I2C_MASTER_LEFT
@@ -77,19 +74,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 )
 
 /* ws2812 RGB LED */
-<<<<<<< HEAD
 #define RGB_DI_PIN D3
 #define RGBLIGHT_TIMER
 #define RGBLED_NUM 12    // Number of LEDs
-=======
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
-#define ws2812_pin PD1
-#define RGBLED_NUM 28     // Number of LEDs
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
 
 /*
  * Feature disable options
@@ -109,8 +98,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-<<<<<<< HEAD
-#endif
-=======
-#endif
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
+
+#endif
\ No newline at end of file
diff --git a/keyboards/lets_split/rev2/rev2.c b/keyboards/lets_split/rev2/rev2.c
index 41dd1e3535..c505d3a6e3 100644
--- a/keyboards/lets_split/rev2/rev2.c
+++ b/keyboards/lets_split/rev2/rev2.c
@@ -24,15 +24,9 @@ void matrix_init_kb(void) {
 };
 
 void shutdown_user(void) {
-<<<<<<< HEAD
     #ifdef AUDIO_ENABLE
         PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
 	_delay_ms(150);
 	stop_all_notes();
     #endif
-=======
-    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
-    _delay_ms(150);
-    stop_all_notes();
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
 }
diff --git a/keyboards/lets_split/rev2/rev2.h b/keyboards/lets_split/rev2/rev2.h
index 9e251ca57d..990976de2b 100644
--- a/keyboards/lets_split/rev2/rev2.h
+++ b/keyboards/lets_split/rev2/rev2.h
@@ -1,15 +1,12 @@
 #ifndef REV2_H
 #define REV2_H
 
-<<<<<<< HEAD
 #include "../lets_split.h"
 
 //void promicro_bootloader_jmp(bool program);
-=======
 #include "quantum.h"
 
-void promicro_bootloader_jmp(bool program);
->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
+//void promicro_bootloader_jmp(bool program);
 
 #define KEYMAP( \
 	k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \