Merge https://github.com/qmk/qmk_firmware

2 files changed, 108 insertions, 2 deletions

diff --git a/keyboards/lets_split/keymaps/OLED_sample/config.h b/keyboards/lets_split/keymaps/OLED_sample/config.h
index 8389ba111d..57ed7d763b 100644
--- a/keyboards/lets_split/keymaps/OLED_sample/config.h
+++ b/keyboards/lets_split/keymaps/OLED_sample/config.h
@@ -1,5 +1,8 @@
 /*
+This is the c configuration file for the keymap
+
 Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -15,12 +18,25 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
 #define USE_I2C
 //#define USE_SERIAL
-//#define MASTER_RIGHT
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
 #define FLIP_HALF
 
 #define SSD1306OLED
+//#define OLED_ROTATE180
 
 
 #define PREVENT_STUCK_MODIFIERS
@@ -40,3 +56,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
 #define RGBLIGHT_VAL_STEP 17
+
+#endif
\ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/OLED_sample/keymap.c b/keyboards/lets_split/keymaps/OLED_sample/keymap.c
index 274f917e21..9553309f89 100644
--- a/keyboards/lets_split/keymaps/OLED_sample/keymap.c
+++ b/keyboards/lets_split/keymaps/OLED_sample/keymap.c
@@ -2,7 +2,7 @@
 #include "bootloader.h"
 #include "action_layer.h"
 #include "eeconfig.h"
-#include "tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/TWI.h"
+#include "LUFA/Drivers/Peripheral/TWI.h"
 #ifdef AUDIO_ENABLE
   #include "audio.h"
 #endif
@@ -357,3 +357,91 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 
     return MACRO_NONE;
 }
+
+
+void matrix_update(struct CharacterMatrix *dest,
+                          const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER 8
+#define L_RAISE 16
+#define L_FNLAYER 64
+#define L_NUMLAY 128
+#define L_NLOWER 136
+#define L_NFNLAYER 192
+#define L_MOUSECURSOR 256
+#define L_ADJUST 65560
+
+void iota_gfx_task_user(void) {
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  struct CharacterMatrix matrix;
+
+  matrix_clear(&matrix);
+  matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+  switch (USB_DeviceState) {
+    case DEVICE_STATE_Unattached:
+      matrix_write_P(&matrix, PSTR("Unattached"));
+      break;
+    case DEVICE_STATE_Suspended:
+      matrix_write_P(&matrix, PSTR("Suspended"));
+      break;
+    case DEVICE_STATE_Configured:
+      matrix_write_P(&matrix, PSTR("Connected"));
+      break;
+    case DEVICE_STATE_Powered:
+      matrix_write_P(&matrix, PSTR("Powered"));
+      break;
+    case DEVICE_STATE_Default:
+      matrix_write_P(&matrix, PSTR("Default"));
+      break;
+    case DEVICE_STATE_Addressed:
+      matrix_write_P(&matrix, PSTR("Addressed"));
+      break;
+    default:
+      matrix_write_P(&matrix, PSTR("Invalid"));
+  }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+  char buf[40];
+  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+    switch (layer_state) {
+        case L_BASE:
+           matrix_write_P(&matrix, PSTR("Default"));
+           break;
+        case L_RAISE:
+           matrix_write_P(&matrix, PSTR("Raise"));
+           break;
+        case L_LOWER:
+           matrix_write_P(&matrix, PSTR("Lower"));
+           break;
+        case L_ADJUST:
+           matrix_write_P(&matrix, PSTR("ADJUST"));
+           break;
+        default:
+           matrix_write(&matrix, buf);
+ }
+  
+  // Host Keyboard LED Status
+  char led[40];
+    snprintf(led, sizeof(led), "\n%s  %s  %s",
+            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+  matrix_write(&matrix, led);
+  matrix_update(&display, &matrix);
+}
\ No newline at end of file