Remove non-Keychron keyboards

1 files changed, 0 insertions, 92 deletions

diff --git a/keyboards/kinesis/kint41/config.h b/keyboards/kinesis/kint41/config.h
deleted file mode 100644
index 6df789d631..0000000000
--- a/keyboards/kinesis/kint41/config.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/* Copyright 2020 QMK
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* key matrix size */
-#define MATRIX_ROWS 15
-#define MATRIX_COLS 7
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS               \
-    {                                 \
-        LINE_PIN8,      /* ROW_EQL */ \
-            LINE_PIN9,  /* ROW_1 */   \
-            LINE_PIN10, /* ROW_2 */   \
-            LINE_PIN11, /* ROW_3 */   \
-            LINE_PIN7,  /* ROW_4 */   \
-            LINE_PIN16, /* ROW_5 */   \
-            LINE_PIN5,  /* ROW_6 */   \
-            LINE_PIN3,  /* ROW_7 */   \
-            LINE_PIN4,  /* ROW_8 */   \
-            LINE_PIN1,  /* ROW_9 */   \
-            LINE_PIN0,  /* ROW_0 */   \
-            LINE_PIN2,  /* ROW_MIN */ \
-            LINE_PIN17, /* ROW_ESC */ \
-            LINE_PIN23, /* ROW_F1 */  \
-            LINE_PIN21 /* ROW_F2 */  \
-    }
-
-#define MATRIX_COL_PINS             \
-    {                               \
-        LINE_PIN18,     /* COL_0 */ \
-            LINE_PIN14, /* COL_1 */ \
-            LINE_PIN15, /* COL_2 */ \
-            LINE_PIN20, /* COL_3 */ \
-            LINE_PIN22, /* COL_4 */ \
-            LINE_PIN19, /* COL_5 */ \
-            LINE_PIN6   /* COL_6 */ \
-    }
-
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Well-worn Cherry MX key switches can bounce for up to 20ms, despite the
- * Cherry data sheet specifying 5ms. Because we use the sym_eager_pk debounce
- * algorithm, this debounce latency only affects key releases (not key
- * presses). */
-#undef DEBOUNCE
-#define DEBOUNCE 20
-
-#define IGNORE_MOD_TAP_INTERRUPT
-
-// The Teensy 4.1 consumes about 100 mA of current at its full speed of 600 MHz
-// as per https://www.pjrc.com/store/teensy41.html
-#define USB_MAX_POWER_CONSUMPTION 100
-
-/* We use the i.MX RT1060 high-speed GPIOs (GPIO6-9) which are connected to the
- * AHB bus (AHB_CLK_ROOT), which runs at the same speed as the ARM Core Clock,
- * i.e. 600 MHz. See MIMXRT1062, page 949, 12.1 Chip-specific GPIO information.
- * No additional delay is necessary. */
-
-// in clock cycles
-#define GPIO_INPUT_PIN_DELAY 0
-
-#define LED_PIN_ON_STATE 0
-#define LED_NUM_LOCK_PIN LINE_PIN26
-#define LED_CAPS_LOCK_PIN LINE_PIN12
-#define LED_SCROLL_LOCK_PIN LINE_PIN25
-#define LED_COMPOSE_PIN LINE_PIN24