Add k8_pro jis version

1 files changed, 24 insertions, 5 deletions

diff --git a/keyboards/keychron/k8_pro/k8_pro.c b/keyboards/keychron/k8_pro/k8_pro.c
index 5fb63f9c6b..ba0cd7e819 100644
--- a/keyboards/keychron/k8_pro/k8_pro.c
+++ b/keyboards/keychron/k8_pro/k8_pro.c
@@ -36,9 +36,10 @@ typedef struct PACKED {
     uint8_t keycode[3];
 } key_combination_t;
 
-static uint32_t power_on_indicator_timer_buffer;
-static uint32_t siri_timer_buffer = 0;
-static uint8_t  mac_keycode[4]    = {KC_LOPT, KC_ROPT, KC_LCMD, KC_RCMD};
+static uint32_t factory_timer_buffer            = 0;
+static uint32_t power_on_indicator_timer_buffer = 0;
+static uint32_t siri_timer_buffer               = 0;
+static uint8_t  mac_keycode[4]                  = {KC_LOPT, KC_ROPT, KC_LCMD, KC_RCMD};
 
 key_combination_t key_comb_list[4] = {
     {2, {KC_LWIN, KC_TAB}},        // Task (win)
@@ -60,7 +61,11 @@ static void pairing_key_timer_cb(void *arg) {
 
 bool dip_switch_update_kb(uint8_t index, bool active) {
     if (index == 0) {
+#ifdef INVERT_OS_SWITCH_STATE
+        default_layer_set(1UL << (!active ? 2 : 0));
+#else
         default_layer_set(1UL << (active ? 2 : 0));
+#endif
     }
     dip_switch_update_user(index, active);
 
@@ -137,7 +142,9 @@ void keyboard_post_init_kb(void) {
 
 #ifdef KC_BLUETOOTH_ENABLE
     /* Currently we don't use this reset pin */
-    palSetLineMode(CKBT51_RESET_PIN, PAL_MODE_UNCONNECTED);
+    // palSetLineMode(CKBT51_RESET_PIN, PAL_MODE_UNCONNECTED);
+    palSetLineMode(CKBT51_RESET_PIN, PAL_MODE_OUTPUT_PUSHPULL);
+    palWriteLine(CKBT51_RESET_PIN, PAL_HIGH);
 
     /* IMPORTANT: DO NOT enable internal pull-up resistor
      * as there is an external pull-down resistor.
@@ -159,6 +166,16 @@ void keyboard_post_init_kb(void) {
 }
 
 void matrix_scan_kb(void) {
+    if (factory_timer_buffer && timer_elapsed32(factory_timer_buffer) > 2000) {
+        factory_timer_buffer = 0;
+        if (bt_factory_reset) {
+            bt_factory_reset = false;
+            palWriteLine(CKBT51_RESET_PIN, PAL_LOW);
+            wait_ms(5);
+            palWriteLine(CKBT51_RESET_PIN, PAL_HIGH);
+        }
+    }
+
     if (power_on_indicator_timer_buffer) {
         if (sync_timer_elapsed32(power_on_indicator_timer_buffer) > POWER_ON_LED_DURATION) {
             power_on_indicator_timer_buffer = 0;
@@ -190,6 +207,7 @@ static void ckbt51_param_init(void) {
     /* Set bluetooth device name */
     // ckbt51_set_local_name(STR(PRODUCT));
     ckbt51_set_local_name(PRODUCT);
+    wait_ms(10);
     /* Set bluetooth parameters */
     module_param_t param = {.event_mode             = 0x02,
                             .connected_idle_timeout = 7200,
@@ -201,12 +219,13 @@ static void ckbt51_param_init(void) {
                             .verndor_id             = 0, // Must be 0x3434
                             .product_id             = PRODUCT_ID};
     ckbt51_set_param(&param);
+    wait_ms(10);
 }
 
 void bluetooth_enter_disconnected_kb(uint8_t host_idx) {
     if (bt_factory_reset) {
-        bt_factory_reset = false;
         ckbt51_param_init();
+        factory_timer_buffer = timer_read32();
     }
     /* CKBT51 bluetooth module boot time is slower, it enters disconnected after boot,
        so we place initialization here. */