Add some new boards

Added k1_pro, k5_pro, k9_pro, k13_pro, q2_pro and q3_pro.

1 files changed, 97 insertions, 0 deletions

diff --git a/keyboards/keychron/k1_pro/config.h b/keyboards/keychron/k1_pro/config.h
new file mode 100755
index 0000000000..b254219bcf
--- /dev/null
+++ b/keyboards/keychron/k1_pro/config.h
@@ -0,0 +1,97 @@
+/* Copyright 2021 @ Keychron (https://www.keychron.com)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS \
+    { B5, B4, B3, A15, A14, A13 }
+#define MATRIX_COL_PINS \
+    { C15, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* turn off effects when suspended */
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
+#define LED_DISABLE_WHEN_USB_SUSPENDED
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* DIP switch */
+#define DIP_SWITCH_PINS \
+    { A8 }
+
+/* Caps lock LED  */
+#define LED_CAPS_LOCK_PIN A0
+#define LED_PIN_ON_STATE 1
+
+#ifdef KC_BLUETOOTH_ENABLE
+/* Hardware configuration */
+#    define USB_BT_MODE_SELECT_PIN A10
+
+#    define CKBT51_RESET_PIN A9
+#    define CKBT51_INT_INPUT_PIN A5
+#    define BLUETOOTH_INT_INPUT_PIN A6
+
+#    define USB_POWER_SENSE_PIN B1
+#    define USB_POWER_CONNECTED_LEVEL 0
+
+#    define BAT_LOW_LED_PIN A4
+#    define BAT_LOW_LED_PIN_ON_STATE 1
+
+#    define HOST_DEVICES_COUNT 3
+
+#    define HOST_LED_PIN_LIST \
+        { H3, H3, H3 }
+#    define HOST_LED_PIN_ON_STATE 1
+
+#    if defined(RGB_MATRIX_ENABLE) || defined(LED_MATRIX_ENABLE)
+
+#        define LED_DRIVER_SHUTDOWN_PIN C14
+
+#        define HOST_LED_MATRIX_LIST \
+            { 17, 18, 19 }
+
+#        define BAT_LEVEL_LED_LIST \
+            { 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 }
+
+/* Backlit disable timeout when keyboard is disconnected(unit: second) */
+#        define DISCONNECTED_BACKLIGHT_DISABLE_TIMEOUT 40
+
+/* Backlit disable timeout when keyboard is connected(unit: second) */
+#        define CONNECTED_BACKLIGHT_DISABLE_TIMEOUT 600
+#    endif
+
+/* Keep USB connection in blueooth mode */
+#    define KEEP_USB_CONNECTION_IN_BLUETOOTH_MODE
+
+/* Enable bluetooth NKRO */
+#    define BLUETOOTH_NKRO_ENABLE
+
+/* Raw hid command for factory test and bluetooth DFU */
+#    define RAW_HID_CMD 0xAA ... 0xAB
+#else
+/* Raw hid command for factory test */
+#    define RAW_HID_CMD 0xAB
+#endif // KC_BLUETOOTH_ENABLE
+
+/* Emulated EEPROM configuration */
+#define FEE_DENSITY_BYTES FEE_PAGE_SIZE
+#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 2047
+
+#define INVERT_OS_SWITCH_STATTE