Remove non-Keychron keyboards

5 files changed, 0 insertions, 276 deletions

diff --git a/keyboards/kapl/rev1/config.h b/keyboards/kapl/rev1/config.h
deleted file mode 100644
index ef6e5449f6..0000000000
--- a/keyboards/kapl/rev1/config.h
+++ /dev/null
@@ -1,91 +0,0 @@
-// Copyright 2022 Alexander Lozyuk (@keyzog)
-// SPDX-License-Identifier: GPL-2.0-or-later
-#pragma once
-
-/* key matrix size */
-/* Rows are doubled up */
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 7
-
-// wiring of each half
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-
-/* Serial settings */
-#define USE_SERIAL
-
-/* serial.c configuration for split keyboard */
-#define SOFT_SERIAL_PIN D2
-
-/* Select hand configuration */
-#define MASTER_LEFT
-
-
-#define RGB_DI_PIN D4
-#define RGBLED_NUM 88
-#define RGBLED_SPLIT { 44, 44 }
-#define RGBLIGHT_SPLIT
-#define RGBLIGHT_LIMIT_VAL 120 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-
-#define DRIVER_LED_TOTAL 88
-#define RGB_MATRIX_SPLIT { 44, 44 }
-#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#define SPLIT_TRANSPORT_MIRROR
-
-#ifdef RGBLIGHT_ENABLE
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 16
-#define RGBLIGHT_VAL_STEP 16
-#define RGBLIGHT_EFFECT_BREATHING
-#define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#define RGBLIGHT_EFFECT_CHRISTMAS
-#define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#define RGBLIGHT_EFFECT_TWINKLE
-#endif
-
-#ifdef RGB_MATRIX_ENABLE
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_SAT_STEP 16
-#define RGB_MATRIX_VAL_STEP 16
-#define RGB_MATRIX_SPD_STEP 10
-// EFFECTS
-#define ENABLE_RGB_MATRIX_ALPHAS_MODS
-#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
-#define ENABLE_RGB_MATRIX_BREATHING
-#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-#define ENABLE_RGB_MATRIX_CYCLE_ALL
-#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
-#define ENABLE_RGB_MATRIX_HUE_BREATHING
-#define ENABLE_RGB_MATRIX_HUE_WAVE
-// KEYPRESSES EFFECTS
-#define RGB_MATRIX_KEYPRESSES
-#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
-#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-#define ENABLE_RGB_MATRIX_MULTISPLASH
-#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
-#endif
-
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
diff --git a/keyboards/kapl/rev1/info.json b/keyboards/kapl/rev1/info.json
deleted file mode 100644
index 2b497b9848..0000000000
--- a/keyboards/kapl/rev1/info.json
+++ /dev/null
@@ -1,91 +0,0 @@
-{
-  "keyboard_name": "Kapl",
-  "manufacturer": "keyzog",
-  "url": "https://github.com/keyzog/kapl",
-  "maintainer": "keyzog",
-  "usb": {
-    "vid": "0x4C41",
-    "pid": "0x0001",
-    "device_version": "0.0.1"
-  },
-  "layouts": {
-      "LAYOUT": {
-          "layout": [
-              {"label":"L00", "x":0, "y":0.38},
-              {"label":"L01", "x":1, "y":0.38},
-              {"label":"L02", "x":2, "y":0.13},
-              {"label":"L03", "x":3, "y":0},
-              {"label":"L04", "x":4, "y":0.13},
-              {"label":"L05", "x":5, "y":0.25},
-              {"label":"L06", "x":6, "y":0.35},
-              {"label":"R00", "x":8.67, "y":0.35},
-              {"label":"R01", "x":9.67, "y":0.25},
-              {"label":"R02", "x":10.67, "y":0.13},
-              {"label":"R03", "x":11.67, "y":0},
-              {"label":"R04", "x":12.67, "y":0.13},
-              {"label":"R05", "x":13.67, "y":0.38},
-              {"label":"R06", "x":14.67, "y":0.38},
-
-              {"label":"L10", "x":0, "y":1.38},
-              {"label":"L11", "x":1, "y":1.38},
-              {"label":"L12", "x":2, "y":1.13},
-              {"label":"L13", "x":3, "y":1},
-              {"label":"L14", "x":4, "y":1.13},
-              {"label":"L15", "x":5, "y":1.25},
-              {"label":"L16", "x":6, "y":1.35},
-              {"label":"R10", "x":8.67, "y":1.35},
-              {"label":"R11", "x":9.67, "y":1.25},
-              {"label":"R12", "x":10.67, "y":1.13},
-              {"label":"R13", "x":11.67, "y":1},
-              {"label":"R14", "x":12.67, "y":1.13},
-              {"label":"R15", "x":13.67, "y":1.38},
-              {"label":"R16", "x":14.67, "y":1.38},
-
-              {"label":"L20", "x":0, "y":2.38},
-              {"label":"L21", "x":1, "y":2.38},
-              {"label":"L22", "x":2, "y":2.13},
-              {"label":"L23", "x":3, "y":2.0},
-              {"label":"L24", "x":4, "y":2.13},
-              {"label":"L25", "x":5, "y":2.25},
-              {"label":"L26", "x":6, "y":2.35},
-              {"label":"R20", "x":8.67, "y":2.35},
-              {"label":"R21", "x":9.67, "y":2.25},
-              {"label":"R22", "x":10.67, "y":2.13},
-              {"label":"R23", "x":11.67, "y":2.0},
-              {"label":"R24", "x":12.67, "y":2.13},
-              {"label":"R25", "x":13.67, "y":2.38},
-              {"label":"R26", "x":14.67, "y":2.38},
-
-              {"label":"L30", "x":0, "y":3.38},
-              {"label":"L31", "x":1, "y":3.38},
-              {"label":"L32", "x":2, "y":3.13},
-              {"label":"L33", "x":3, "y":3.0},
-              {"label":"L34", "x":4, "y":3.13},
-              {"label":"L35", "x":5, "y":3.25},
-              {"label":"L36", "x":6, "y":3.35},
-              {"label":"R30", "x":8.67, "y":3.35},
-              {"label":"R31", "x":9.67, "y":3.25},
-              {"label":"R32", "x":10.67, "y":3.13},
-              {"label":"R33", "x":11.67, "y":3.0},
-              {"label":"R34", "x":12.67, "y":3.13},
-              {"label":"R35", "x":13.67, "y":3.38},
-              {"label":"R36", "x":14.67, "y":3.38},
-
-              {"label":"L40", "x":0, "y":4.38},
-              {"label":"L41", "x":1, "y":4.38},
-              {"label":"L42", "x":2, "y":4.13},
-              {"label":"L43", "x":3, "y":4.0},
-              {"label":"L44", "x":4, "y":4.13},
-              {"label":"L45", "x":5.35, "y":4.92},
-              {"label":"L46", "x":6.35, "y":4.45, "h":1.5},
-              {"label":"R40", "x":8.02, "y":4.45, "h":1.5},
-              {"label":"R41", "x":9.02, "y":4.92},
-              {"label":"R42", "x":10.67, "y":4.13},
-              {"label":"R43", "x":11.67, "y":4.0},
-              {"label":"R44", "x":12.67, "y":4.13},
-              {"label":"R45", "x":13.67, "y":4.38},
-              {"label":"R46", "x":14.67, "y":4.38}
-          ]
-      }
-  }
-}
diff --git a/keyboards/kapl/rev1/rev1.c b/keyboards/kapl/rev1/rev1.c
deleted file mode 100644
index b51021307e..0000000000
--- a/keyboards/kapl/rev1/rev1.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// Copyright 2022 Alexander Lozyuk (@keyzog)
-// SPDX-License-Identifier: GPL-2.0-or-later
-#include "kapl.h"
-
-#ifdef RGB_MATRIX_ENABLE
-led_config_t g_led_config = { {
-    // Left Hand
-    // { 8,  7,  6,  5,  4,  3,  2,  1,  0 }, // underglow
-    {  9, 10, 11, 12, 13, 14, 15 },
-    { 22, 21, 20, 19, 18, 17, 16 },
-    { 23, 24, 25, 26, 27, 28, 29 },
-    { 36, 35, 34, 33, 32, 31, 30 },
-    { 37, 38, 39, 40, 41, 42, 43 },
-
-    // Right Hand
-    // { 44,  45,  46,  47,  48,  49,  50,  51,  52 }, // underglow
-    { 53, 54, 55, 56, 57, 58, 59 },
-    { 66, 65, 64, 63, 62, 61, 60 },
-    { 67, 68, 69, 70, 71, 72, 73 },
-    { 80, 79, 78, 77, 76, 75, 74 },
-    { 81, 82, 83, 84, 85, 86, 87 }
-}, {
-    // Left Hand
-    {96, 57},  {112, 44}, {112, 19}, {80, 19}, {48, 19}, {16, 19}, {16, 57}, {48, 57}, {80, 57}, // underglow
-    {0, 0},    {17, 0},   {34, 0},   {52, 0},  {69, 0},  {86, 0},  {103, 0},
-    {103, 16}, {86, 16},  {69, 16},  {52, 16}, {34, 16}, {17, 16}, {0, 16},
-    {0, 32},   {17, 32},  {34, 32},  {52, 32}, {69, 32}, {86, 32}, {103, 32},
-    {103, 48}, {86, 48},  {69, 48},  {52, 48}, {34, 48}, {17, 48}, {0, 48},
-    {0, 64},   {17, 64},  {34, 64},  {52, 64}, {69, 64}, {86, 64}, {103, 64},
-
-    // Right Hand
-    {144, 57}, {128, 44}, {128, 19}, {160, 19}, {192, 19}, {224, 19}, {224, 57}, {192, 57}, {160, 57}, // underglow
-    {224, 0},  {207, 0},  {190, 0},  {172, 0},  {155, 0},  {138, 0},  {121, 0},
-    {121, 16}, {138, 16}, {155, 16}, {172, 16}, {190, 16}, {207, 16}, {224, 16},
-    {224, 32}, {207, 32}, {190, 32}, {172, 32}, {155, 32}, {138, 32}, {121, 32},
-    {121, 48}, {138, 48}, {155, 48}, {172, 48}, {190, 48}, {207, 48}, {224, 48},
-    {224, 64}, {207, 64}, {190, 64}, {172, 64}, {155, 64}, {138, 64}, {121, 64}
-}, {
-    // Left Hand
-    2, 2, 2, 2, 2, 2, 2, 2, 2, // underglow
-    1, 4, 4, 4, 4, 4, 1,
-    1, 4, 4, 4, 4, 4, 1,
-    1, 4, 4, 4, 4, 4, 1,
-    1, 4, 4, 4, 4, 4, 1,
-    1, 1, 1, 1, 1, 1, 1,
-
-    // Right Hand
-    2, 2, 2, 2, 2, 2, 2, 2, 2, // underglow
-    1, 4, 4, 4, 4, 4, 1,
-    1, 4, 4, 4, 4, 4, 1,
-    1, 4, 4, 4, 4, 4, 1,
-    1, 4, 4, 4, 4, 4, 1,
-    1, 1, 1, 1, 1, 1, 1
-} };
-#endif
diff --git a/keyboards/kapl/rev1/rev1.h b/keyboards/kapl/rev1/rev1.h
deleted file mode 100644
index 68649a7991..0000000000
--- a/keyboards/kapl/rev1/rev1.h
+++ /dev/null
@@ -1,34 +0,0 @@
-// Copyright 2022 Alexander Lozyuk (@keyzog)
-// SPDX-License-Identifier: GPL-2.0-or-later
-#pragma once
-
-#include "kapl.h"
-
-/* This a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-
-#define LAYOUT( \
-  L00, L01, L02, L03, L04, L05, L06,        R00, R01, R02, R03, R04, R05, R06, \
-  L10, L11, L12, L13, L14, L15, L16,        R10, R11, R12, R13, R14, R15, R16, \
-  L20, L21, L22, L23, L24, L25, L26,        R20, R21, R22, R23, R24, R25, R26, \
-  L30, L31, L32, L33, L34, L35, L36,        R30, R31, R32, R33, R34, R35, R36, \
-  L40, L41, L42, L43, L44,   L45, L46,    R40, R41,   R42, R43, R44, R45, R46  \
-) \
-{ \
-    { L00, L01, L02, L03, L04, L05, L06 }, \
-    { L10, L11, L12, L13, L14, L15, L16 }, \
-    { L20, L21, L22, L23, L24, L25, L26 }, \
-    { L30, L31, L32, L33, L34, L35, L36 }, \
-    { L40, L41, L42, L43, L44, L45, L46 }, \
-    { R06, R05, R04, R03, R02, R01, R00 }, \
-    { R16, R15, R14, R13, R12, R11, R10 }, \
-    { R26, R25, R24, R23, R22, R21, R20 }, \
-    { R36, R35, R34, R33, R32, R31, R30 }, \
-    { R46, R45, R44, R43, R42, R41, R40 }  \
-}
diff --git a/keyboards/kapl/rev1/rules.mk b/keyboards/kapl/rev1/rules.mk
deleted file mode 100644
index e3a4137694..0000000000
--- a/keyboards/kapl/rev1/rules.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# Do not enable RGB_MATRIX_ENABLE together with RGBLIGHT_ENABLE
-RGB_MATRIX_ENABLE = yes
-RGB_MATRIX_DRIVER = WS2812
-
-LTO_ENABLE = yes