Remove non-Keychron keyboards

8 files changed, 0 insertions, 333 deletions

diff --git a/keyboards/kakunpc/suihankey/rev1/config.h b/keyboards/kakunpc/suihankey/rev1/config.h
deleted file mode 100644
index a1e7183124..0000000000
--- a/keyboards/kakunpc/suihankey/rev1/config.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
-Copyright 2019 kakunpc
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 4
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7 }
-//#define USE_I2C
-//#undef USE_SERIAL
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-#define SPLIT_HAND_PIN D2
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-#define RGB_DI_PIN D3
-#ifdef RGB_DI_PIN
-   #define RGBLED_NUM 18
-   #define RGBLIGHT_HUE_STEP 8
-   #define RGBLIGHT_SAT_STEP 8
-   #define RGBLIGHT_VAL_STEP 8
-   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-   #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-
-// #define RGBLED_SPLIT {18,18}
diff --git a/keyboards/kakunpc/suihankey/rev1/info.json b/keyboards/kakunpc/suihankey/rev1/info.json
deleted file mode 100644
index 299c847aab..0000000000
--- a/keyboards/kakunpc/suihankey/rev1/info.json
+++ /dev/null
@@ -1,38 +0,0 @@
-{
-    "keyboard_name": "Suihankey",
-    "manufacturer": "kakunpc",
-    "url": "https://kakunpc.booth.pm/",
-    "maintainer": "kakunpc",
-    "usb": {
-        "vid": "0xFEED",
-        "pid": "0x0000",
-        "device_version": "0.0.1"
-    },
-    "layouts": {
-        "LAYOUT": {
-            "layout": [
-                {"x": 0, "y": 0.375},
-                {"x": 1, "y": 0.125},
-                {"x": 2, "y": 0},
-                {"x": 3, "y": 0.125},
-                {"x": 4, "y": 0.25},
-
-                {"x": 0, "y": 1.375},
-                {"x": 1, "y": 1.125},
-                {"x": 2, "y": 1},
-                {"x": 3, "y": 1.125},
-                {"x": 4, "y": 1.25},
-
-                {"x": 0, "y": 2.375},
-                {"x": 1, "y": 2.125},
-                {"x": 2, "y": 2},
-                {"x": 3, "y": 2.125},
-                {"x": 4, "y": 2.25},
-
-                {"x": 3.4, "y": 3.25},
-                {"x": 4.4, "y": 3.55},
-                {"x": 5.4, "y": 3.85}
-            ]
-        }
-    }
-}
diff --git a/keyboards/kakunpc/suihankey/rev1/keymaps/default/keymap.c b/keyboards/kakunpc/suihankey/rev1/keymaps/default/keymap.c
deleted file mode 100644
index d937b68813..0000000000
--- a/keyboards/kakunpc/suihankey/rev1/keymaps/default/keymap.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/* Copyright 2019 kakunpc
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-enum layers{
-    BASE,
-    COMMAND,
-    NUMBER,
-    FUNCTION
-};
-
-#define KC_CMD_SP    LT(COMMAND,KC_SPC)
-#define KC_CMD_ET    LT(COMMAND,KC_ENTER)
-#define KC_NUM_ALT   LT(NUMBER,KC_LALT)
-#define KC_NUM_BS    LT(NUMBER,KC_BSPC)
-#define KC_SET_CTRL  LT(FUNCTION,KC_LCTRL)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [BASE] = LAYOUT( /* Base */
-          KC_Q,  KC_W,  KC_E, KC_R, KC_T,
-          KC_A,  KC_S,  KC_D, KC_F, KC_G,
-          KC_Z,  KC_X,  KC_C, KC_V, KC_B,
-       KC_SET_CTRL,  KC_NUM_ALT,  KC_CMD_SP
-  ),
-  [COMMAND] = LAYOUT( /* Base */
-          KC_Q,  KC_W,  KC_E, KC_R, KC_T,
-          KC_A,  KC_S,  KC_D, KC_F, KC_G,
-    LCTL(KC_Z),  LCTL(KC_X),  LCTL(KC_C), LCTL(KC_V), LCTL(KC_B),
-                   KC_NO,  KC_NO,  KC_NO
-  ),
-  [NUMBER] = LAYOUT( /* Base */
-          KC_1,  KC_2,  KC_3,  KC_4,  KC_5,
-          KC_6,  KC_7,  KC_8,  KC_9,  KC_0,
-          KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
-                        KC_NO, KC_NO, KC_NO
-  ),
-  [FUNCTION] = LAYOUT( /* Base */
-          KC_F1,  KC_F2,  KC_F3,   KC_F4,   KC_F5,
-          KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,
-          KC_F11, KC_F12, RGB_TOG, RGB_MOD, RGB_RMOD,
-                          KC_NO,   KC_NO,   KC_NO
-  ),
-};
-
-#ifdef OLED_ENABLE
-bool oled_task_user(void) {
-  oled_write_P(PSTR("Layer: "), false);
-  switch (get_highest_layer(layer_state)) {
-    case BASE:
-      oled_write_P(PSTR("Default\n"), false);
-      break;
-    case COMMAND:
-      oled_write_P(PSTR("COMMAND\n"), false);
-      break;
-    case NUMBER:
-      oled_write_P(PSTR("NUMBER\n"), false);
-      break;
-    case FUNCTION:
-      oled_write_P(PSTR("FUNCTION\n"), false);
-      break;
-    default:
-      // Or use the write_ln shortcut over adding 'n' to the end of your string
-      oled_write_ln_P(PSTR("Undefined"), false);
-  }
-
-  // Host Keyboard LED Status
-  oled_write_P(IS_HOST_LED_ON(USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR("       "), false);
-  oled_write_P(IS_HOST_LED_ON(USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR("       "), false);
-  oled_write_P(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR("       "), false);
-
-    return false;
-}
-#endif
diff --git a/keyboards/kakunpc/suihankey/rev1/keymaps/default/readme.md b/keyboards/kakunpc/suihankey/rev1/keymaps/default/readme.md
deleted file mode 100644
index 95eac805a0..0000000000
--- a/keyboards/kakunpc/suihankey/rev1/keymaps/default/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for suihankey
\ No newline at end of file
diff --git a/keyboards/kakunpc/suihankey/rev1/readme.md b/keyboards/kakunpc/suihankey/rev1/readme.md
deleted file mode 100644
index 1c80a8af63..0000000000
--- a/keyboards/kakunpc/suihankey/rev1/readme.md
+++ /dev/null
@@ -1,18 +0,0 @@
-# suihankey_rev1
-
-![suihankey_rev1](https://i.gyazo.com/07b9e882fd0c0ad00c8c98d93e94e383.jpg)
-
-Compact with only 18 keys is a concept keyboard.  
-Supports OLED and RGBLED (optional)
-
-
-
-Keyboard Maintainer: [kakunpc](https://github.com/kakunpc)  
-Hardware Supported: suihankey_rev1, promicro  
-Hardware Availability: booth([@kakunpc](https://kakunpc.booth.pm/))
-
-Make example for this keyboard (after setting up your build environment):
-
-    make suihankey/rev1:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kakunpc/suihankey/rev1/rev1.c b/keyboards/kakunpc/suihankey/rev1/rev1.c
deleted file mode 100644
index 40ff30e620..0000000000
--- a/keyboards/kakunpc/suihankey/rev1/rev1.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Copyright 2019 kakunpc
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "rev1.h"
diff --git a/keyboards/kakunpc/suihankey/rev1/rev1.h b/keyboards/kakunpc/suihankey/rev1/rev1.h
deleted file mode 100644
index cbc877abd5..0000000000
--- a/keyboards/kakunpc/suihankey/rev1/rev1.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Copyright 2019 kakunpc
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "quantum.h"
-
-/* This a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the Leys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT( \
-    L00, L01, L02, L03, L04, \
-    L10, L11, L12, L13, L14, \
-    L20, L21, L22, L23, L24, \
-              L30, L31, L32  \
-) \
-{ \
-    { L00, L10, L20, L30 }, \
-    { L01, L11, L21, L31 }, \
-    { L02, L12, L22, L32 }, \
-    { L03, L13, L23, KC_NO }, \
-    { L04, L14, L24, KC_NO }, \
-}
diff --git a/keyboards/kakunpc/suihankey/rev1/rules.mk b/keyboards/kakunpc/suihankey/rev1/rules.mk
deleted file mode 100644
index 1e3cebb145..0000000000
--- a/keyboards/kakunpc/suihankey/rev1/rules.mk
+++ /dev/null
@@ -1 +0,0 @@
-RGBLIGHT_ENABLE = yes