[Keyboard] Update ATmega32A readme files to match template (#7462)

* Update atmega32a readme files to match template

* Update atmega32a readme files to match template - fixes

* Apply suggestions from code review

1 files changed, 8 insertions, 71 deletions

diff --git a/keyboards/jj40/README.md b/keyboards/jj40/README.md
index 7d3612554b..5f4d2c8a99 100644
--- a/keyboards/jj40/README.md
+++ b/keyboards/jj40/README.md
@@ -4,81 +4,18 @@
 
 A compact 40% (12x4) ortholinear keyboard kit made and KPRepublic on AliExpress.
 
-Keyboard Maintainer: [QMK Community](https://github.com/qmk)  
-Hardware Supported: Atmega32A  
-Hardware Availability: [AliExpress](https://www.aliexpress.com/store/product/jj40-Custom-Mechanical-Keyboard-40-PCB-programmed-40-planck-layouts-bface-firmware-gh40/3034003_32828781103.html)
+* Keyboard Maintainer: [QMK Community](https://github.com/qmk)
+* Hardware Supported: Atmega32A
+* Hardware Availability: [AliExpress](https://www.aliexpress.com/store/product/jj40-Custom-Mechanical-Keyboard-40-PCB-programmed-40-planck-layouts-bface-firmware-gh40/3034003_32828781103.html)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make jj40:default:program
+    make jj40:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
 
-Note that this is a complete replacement for the firmware, so you won't be
-using Bootmapper Client to change any keyboard settings, since not all the
-USB report options are supported.
+    make jj40:default:flash
 
-In addition you may need the AVR toolchain and `bootloadHID` ([GitHub repo](https://github.com/whiteneon/bootloadHID)) for flashing:
+**Reset Key**: Hold down the *Top Right Key* key, commonly programmed as *Backspace* while plugging in the keyboard.
 
-For macOS:
-```
-$ brew cask install crosspack-avr
-$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-```
-
-For Linux:
-```
-$ sudo apt install libusb-dev
-$ wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz
-$ tar -xzf bootloadHID.2012-12-08.tar.gz
-$ cd bootloadHID.2012-12-08/commandline
-$ make
-$ sudo cp bootloadHID /usr/bin
-```
-
-In order to use the `././util/atmega32a_program.py` script, which can reboot the board into
-the bootloader, you'll need Python 2 with PyUSB installed:
-
-```
-$ pip install pyusb
-```
-
-If you prefer (or are having issues with a `program` flash), you can just build it (`make jj40:<keymap-name>` and flash the firmware (`.hex` file) directly with
-`bootloadHID` if you boot the board while holding down `Backspace` (`Top Right Key`) to keep it
-in the bootloader:
-
-```
-$ make jj40
-$ bootloadHID -r jj40_default.hex
-```
-
-For Windows 10:
-Windows sometimes doesn't recognize the jj40. The easiest way of flashing a new layout is probably using [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
-1. Go to Windows Device Manager and find the keyboard (plug it in while holding down `Backspace` (`Top Right Key`)). It can be found under Human Interface Devices or under Keyboards.
-2. Go to properties and the Details tab to find the hardware ID. You want the VID and the PID (code after the underscore). Plug them into HIDBootFlash and hit Find Device.
-3. Use `make jj40:<keymap-name>` to generate the .hex file in the qmk basis folder. Select the .hex file in HIDBootFlash and press Flash Device.
-
-
-## Troubleshooting
-
-1. Try plugging the board in while pressing `Backspace` (`Top Right Key`). This will force it
-   to boot only the bootloader without loading the firmware. Once this is
-   done, just reflash the board with the original firmware.
-2. Sometimes USB hubs can act weird, so try connecting the board directly
-   to your computer or plugging/unplugging the USB hub.
-3. If you get an error such as "Resource Unavailable" when attemting to flash
-   on Linux, you may want to compile and run `tools/usb_detach.c`. See `tools/README.md`
-   for more info.
-
-## Recovery 
-If you flash a bad hex (e.g. you have a V1 board without RGB and compile/flash blindly without editing your rules.mk), your jj40 is now semi-bricked and you're stuck unless you have access to an ISP. The [ISP Flashing Guide](https://docs.qmk.fm/#/isp_flashing_guide) contains very good (but somewhat generalized) information. However, the instructions below should get you up and running provided you have an Arduino or clone.
-
-### Arduino Setup 
-1. Upload the ArduinoISP sketch onto your Arduino board (https://www.arduino.cc/en/Tutorial/ArduinoISP).  
-2. Wire the Arduino to the jj40. Match the data pins on the Arduino to those on the jj40. "RST" usually goes to D10 on the Arduino. I didn't need a capacitor when using my Uno. 
-![Imgur](https://i.imgur.com/oLWJOkQ.jpg)
-3. Get a working bootloader from https://blog.winkeyless.kr/m/152. The file is called "main.hex" from the archive called "ps2avrGB_bootloader_161215.zip"  Copy "main.hex" to your qmk folder.  
-4. Burn the bootloader with the following command  
-` avrdude -b 19200 -c avrisp -p atmega32 -v -e -U hfuse:w:0xD0:m -U lfuse:w:0x0F:m -U flash:w:main.hex:i -P comPORT`  
-Change `comPORT` to whatever port is used by the Arduino (e.g. `com11` in Windows or `/dev/ttyACM0` in Linux). Use Device Manager in Windows to find the port being used. Use `ls /dev/tty*` in Linux.
-5. If this process is successful, you should now be able to upload normally.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).