move input club keyboards into vendor folder (#15788)

1 files changed, 363 insertions, 0 deletions

diff --git a/keyboards/input_club/ergodox_infinity/ergodox_infinity.c b/keyboards/input_club/ergodox_infinity/ergodox_infinity.c
new file mode 100644
index 0000000000..e6ac2c4559
--- /dev/null
+++ b/keyboards/input_club/ergodox_infinity/ergodox_infinity.c
@@ -0,0 +1,363 @@
+#include QMK_KEYBOARD_H
+#include <ch.h>
+#include <hal.h>
+#include <string.h>
+#include "eeconfig.h"
+
+#define RED_PIN 1
+#define GREEN_PIN 2
+#define BLUE_PIN 3
+#define CHANNEL_RED FTM0->CHANNEL[0]
+#define CHANNEL_GREEN FTM0->CHANNEL[1]
+#define CHANNEL_BLUE FTM0->CHANNEL[2]
+
+#define RGB_PORT PORTC
+#define RGB_PORT_GPIO GPIOC
+
+// Base FTM clock selection (72 MHz system clock)
+// @ 0xFFFF period, 72 MHz / (0xFFFF * 2) = Actual period
+// Higher pre-scalar will use the most power (also look the best)
+// Pre-scalar calculations
+// 0 -      72 MHz -> 549 Hz
+// 1 -      36 MHz -> 275 Hz
+// 2 -      18 MHz -> 137 Hz
+// 3 -       9 MHz ->  69 Hz (Slightly visible flicker)
+// 4 -   4 500 kHz ->  34 Hz (Visible flickering)
+// 5 -   2 250 kHz ->  17 Hz
+// 6 -   1 125 kHz ->   9 Hz
+// 7 - 562 500  Hz ->   4 Hz
+// Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced
+// Which will reduce the brightness range
+#define PRESCALAR_DEFINE 0
+void lcd_backlight_hal_init(void) {
+    // Setup Backlight
+    SIM->SCGC6 |= SIM_SCGC6_FTM0;
+    FTM0->CNT = 0;  // Reset counter
+
+    // PWM Period
+    // 16-bit maximum
+    FTM0->MOD = 0xFFFF;
+
+    // Set FTM to PWM output - Edge Aligned, Low-true pulses
+#define CNSC_MODE FTM_SC_CPWMS | FTM_SC_PS(4) | FTM_SC_CLKS(0)
+    CHANNEL_RED.CnSC   = CNSC_MODE;
+    CHANNEL_GREEN.CnSC = CNSC_MODE;
+    CHANNEL_BLUE.CnSC  = CNSC_MODE;
+
+    // System clock, /w prescalar setting
+    FTM0->SC = FTM_SC_CLKS(1) | FTM_SC_PS(PRESCALAR_DEFINE);
+
+    CHANNEL_RED.CnV   = 0;
+    CHANNEL_GREEN.CnV = 0;
+    CHANNEL_BLUE.CnV  = 0;
+
+    RGB_PORT_GPIO->PDDR |= (1 << RED_PIN);
+    RGB_PORT_GPIO->PDDR |= (1 << GREEN_PIN);
+    RGB_PORT_GPIO->PDDR |= (1 << BLUE_PIN);
+
+#define RGB_MODE PORTx_PCRn_SRE | PORTx_PCRn_DSE | PORTx_PCRn_MUX(4)
+    RGB_PORT->PCR[RED_PIN]   = RGB_MODE;
+    RGB_PORT->PCR[GREEN_PIN] = RGB_MODE;
+    RGB_PORT->PCR[BLUE_PIN]  = RGB_MODE;
+}
+
+static uint16_t cie_lightness(uint16_t v) {
+    // The CIE 1931 formula for lightness
+    // Y = luminance (output) 0-1
+    // L = lightness input 0 - 100
+
+    // Y = (L* / 902.3)           if L* <= 8
+    // Y = ((L* + 16) / 116)^3    if L* > 8
+
+    float l = 100.0f * (v / 65535.0f);
+    float y = 0.0f;
+    if (l <= 8.0f) {
+        y = l / 902.3;
+    } else {
+        y = ((l + 16.0f) / 116.0f);
+        y = y * y * y;
+        if (y > 1.0f) {
+            y = 1.0f;
+        }
+    }
+    return y * 65535.0f;
+}
+
+void ergodox_infinity_lcd_color(uint16_t r, uint16_t g, uint16_t b) {
+    CHANNEL_RED.CnV   = cie_lightness(r);
+    CHANNEL_GREEN.CnV = cie_lightness(g);
+    CHANNEL_BLUE.CnV  = cie_lightness(b);
+}
+
+__attribute__ ((weak)) void matrix_init_user(void) {}
+
+__attribute__ ((weak)) void matrix_scan_user(void) {}
+
+
+void keyboard_pre_init_kb() {
+#ifdef LED_MATRIX_ENABLE
+    // Turn on LED controller
+    setPinOutput(B16);
+    writePinHigh(B16);
+#endif
+    // The backlight always has to be initialized, otherwise it will stay lit
+    lcd_backlight_hal_init();
+#ifdef ST7565_ENABLE
+    ergodox_infinity_lcd_color(UINT16_MAX / 2, UINT16_MAX / 2, UINT16_MAX / 2);
+#endif
+    keyboard_pre_init_user();
+}
+
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+
+#ifdef LED_MATRIX_ENABLE
+    /*
+     * Since K20x is stuck with a 32 byte EEPROM (see tmk_core/common/chibios/eeprom_teensy.c),
+     * and neither led_matrix_eeconfig.speed or .flags fit in this boundary, just force their values to default on boot.
+     */
+#    if !defined(LED_MATRIX_STARTUP_SPD)
+#        define LED_MATRIX_STARTUP_SPD UINT8_MAX / 2
+#    endif
+    led_matrix_set_speed(LED_MATRIX_STARTUP_SPD);
+    led_matrix_set_flags(LED_FLAG_ALL);
+#endif
+
+    matrix_init_user();
+}
+
+__attribute__ ((weak)) void ergodox_board_led_on(void) {}
+
+__attribute__ ((weak)) void ergodox_right_led_1_on(void) {}
+
+__attribute__ ((weak)) void ergodox_right_led_2_on(void) {}
+
+__attribute__ ((weak)) void ergodox_right_led_3_on(void) {}
+
+__attribute__ ((weak)) void ergodox_board_led_off(void) {}
+
+__attribute__ ((weak)) void ergodox_right_led_1_off(void) {}
+
+__attribute__ ((weak)) void ergodox_right_led_2_off(void) {}
+
+__attribute__ ((weak)) void ergodox_right_led_3_off(void) {}
+
+__attribute__ ((weak)) void ergodox_right_led_1_set(uint8_t n) {}
+
+__attribute__ ((weak)) void ergodox_right_led_2_set(uint8_t n) {}
+
+__attribute__ ((weak)) void ergodox_right_led_3_set(uint8_t n) {}
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+    {{0,  9}, {1,  9}, {2,  9}, {3,  9}, {4,  9}},
+    {{0, 10}, {1, 10}, {2, 10}, {3, 10}, {4, 10}},
+    {{0, 11}, {1, 11}, {2, 11}, {3, 11}, {4, 11}},
+    {{0, 12}, {1, 12}, {2, 12}, {3, 12}, {4, 12}},
+    {{0, 13}, {1, 13}, {2, 13}, {3, 13}, {4, 13}},
+    {{0, 14}, {1, 14}, {2, 14}, {3, 14}, {4, 14}},
+    {{0, 15}, {1, 15}, {2, 15}, {3, 15}, {4, 15}},
+    {{0, 16}, {1, 16}, {2, 16}, {3, 16}, {4, 16}},
+    {{0, 17}, {1, 17}, {2, 17}, {3, 17}, {4, 17}},
+    {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}},
+    {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}},
+    {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}},
+    {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}},
+    {{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}},
+    {{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}},
+    {{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}},
+    {{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}},
+    {{0, 8}, {1, 8}, {2, 8}, {3, 8}, {4, 8}},
+};
+#endif
+
+#ifdef LED_MATRIX_ENABLE
+const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = {
+// The numbers in the comments are the led numbers DXX on the PCB
+/* Refer to IS31 manual for these locations
+ *  driver
+ *  |   LED address
+ *  |   | */
+// Left half
+//      45           44           43           42           41           40           39
+   { 0, C2_2 }, { 0, C1_2 }, { 0, C5_1 }, { 0, C4_1 }, { 0, C3_1 }, { 0, C2_1 }, { 0, C1_1 },
+//      52           51           50           49           48           47           46
+   { 0, C4_3 }, { 0, C3_3 }, { 0, C2_3 }, { 0, C1_3 }, { 0, C5_2 }, { 0, C4_2 }, { 0, C3_2 },
+//      58           57           56           55           54           53
+   { 0, C5_4 }, { 0, C4_4 }, { 0, C3_4 }, { 0, C2_4 }, { 0, C1_4 }, { 0, C5_3 },
+//      67           66           65           64           63           62           61
+   { 0, C4_6 }, { 0, C3_6 }, { 0, C2_6 }, { 0, C1_6 }, { 0, C5_5 }, { 0, C4_5 }, { 0, C3_5 },
+//      76           75           74           73           72
+   { 0, C4_8 }, { 0, C3_8 }, { 0, C2_8 }, { 0, C1_8 }, { 0, C4_7 },
+//                                                                                    60           59
+                                                                                 { 0, C2_5 }, { 0, C1_5 },
+//                                                                                                 68
+                                                                                              { 0, C5_6 },
+//                                                                       71           70           69
+                                                                    { 0, C3_7 }, { 0, C2_7 }, { 0, C1_7 },
+// Right half (mirrored)
+// Due to how LED_MATRIX_SPLIT is implemented, only the first half of g_is31_leds is actually used.
+// Luckily, the right half has the same LED pinouts, just mirrored.
+//      45           44           43           42           41           40           39
+   { 0, C2_2 }, { 0, C1_2 }, { 0, C5_1 }, { 0, C4_1 }, { 0, C3_1 }, { 0, C2_1 }, { 0, C1_1 },
+//      52           51           50           49           48           47           46
+   { 0, C4_3 }, { 0, C3_3 }, { 0, C2_3 }, { 0, C1_3 }, { 0, C5_2 }, { 0, C4_2 }, { 0, C3_2 },
+//      58           57           56           55           54           53
+   { 0, C5_4 }, { 0, C4_4 }, { 0, C3_4 }, { 0, C2_4 }, { 0, C1_4 }, { 0, C5_3 },
+//      67           66           65           64           63           62           61
+   { 0, C4_6 }, { 0, C3_6 }, { 0, C2_6 }, { 0, C1_6 }, { 0, C5_5 }, { 0, C4_5 }, { 0, C3_5 },
+//      76           75           74           73           72
+   { 0, C4_8 }, { 0, C3_8 }, { 0, C2_8 }, { 0, C1_8 }, { 0, C4_7 },
+//                                                                                    60           59
+                                                                                 { 0, C2_5 }, { 0, C1_5 },
+//                                                                                                 68
+                                                                                              { 0, C5_6 },
+//                                                                       71           70           69
+                                                                    { 0, C3_7 }, { 0, C2_7 }, { 0, C1_7 },
+};
+
+led_config_t g_led_config = {
+    {
+        // Key Matrix to LED Index
+        // Left half
+        { NO_LED, NO_LED, NO_LED,     33,     34 },
+        { NO_LED, NO_LED, NO_LED,     32,     37 },
+        {      6,     13, NO_LED,     26,     36 },
+        {      5,     12,     19,     25,     35 },
+        {      4,     11,     18,     24,     31 },
+        {      3,     10,     17,     23,     30 },
+        {      2,      9,     16,     22,     29 },
+        {      1,      8,     15,     21,     28 },
+        {      0,      7,     14,     20,     27 },
+        // Right half
+        { NO_LED, NO_LED, NO_LED,     71,     72 },
+        { NO_LED, NO_LED, NO_LED,     70,     75 },
+        {     44,     51, NO_LED,     64,     74 },
+        {     43,     50,     57,     63,     73 },
+        {     42,     49,     56,     62,     69 },
+        {     41,     48,     55,     61,     68 },
+        {     40,     47,     54,     60,     67 },
+        {     39,     46,     53,     59,     66 },
+        {     38,     45,     52,     58,     65 },
+    }, {
+        // LED Index to Physical Position (assumes a reasonable gap between halves)
+	// Left half
+        {   0,  3 }, {  15,  3 }, {  27,  1 }, {  39,  0 }, {  51,  1 }, {  63,  2 }, {  75,  2 },
+        {   0, 13 }, {  15, 13 }, {  27, 11 }, {  39, 10 }, {  51, 11 }, {  63, 12 }, {  78, 17 },
+        {   0, 23 }, {  15, 23 }, {  27, 21 }, {  39, 20 }, {  51, 21 }, {  63, 22 },
+        {   0, 33 }, {  15, 33 }, {  27, 31 }, {  39, 30 }, {  51, 31 }, {  63, 32 }, {  78, 32 },
+        {   4, 43 }, {  15, 43 }, {  27, 41 }, {  39, 40 }, {  51, 41 },
+                                                                                      {  89, 41 }, { 100, 46 },
+                                                                                                   {  95, 55 },
+                                                                         {  72, 54 }, {  83, 59 }, {  90, 64 },
+        // Right half (mirrored)
+        { 224,  3 }, { 209,  3 }, { 197,  1 }, { 185,  0 }, { 173,  1 }, { 161,  2 }, { 149,  2 },
+        { 224, 13 }, { 209, 13 }, { 197, 11 }, { 185, 10 }, { 173, 11 }, { 161, 12 }, { 146, 17 },
+        { 224, 23 }, { 209, 23 }, { 197, 21 }, { 185, 20 }, { 173, 21 }, { 161, 22 },
+        { 224, 33 }, { 209, 33 }, { 197, 31 }, { 185, 30 }, { 173, 31 }, { 161, 32 }, { 146, 32 },
+        { 220, 43 }, { 209, 43 }, { 197, 41 }, { 185, 40 }, { 173, 41 },
+                                                                                      { 135, 41 }, { 124, 46 },
+                                                                                                   { 129, 55 },
+                                                                         { 152, 54 }, { 141, 59 }, { 134, 64 },
+    }, {
+        // LED Index to Flag
+        // Left half
+        1, 4, 4, 4, 4, 4, 1,
+        1, 4, 4, 4, 4, 4, 1,
+        1, 4, 4, 4, 4, 4,
+        1, 4, 4, 4, 4, 4, 1,
+        1, 1, 1, 1, 1,
+                          1, 1,
+                             1,
+                       1, 1, 1,
+        // Right half (mirrored)
+        1, 4, 4, 4, 4, 4, 1,
+        1, 4, 4, 4, 4, 4, 1,
+        1, 4, 4, 4, 4, 4,
+        1, 4, 4, 4, 4, 4, 1,
+        1, 1, 1, 1, 1,
+                          1, 1,
+                             1,
+                       1, 1, 1,
+    }
+};
+#endif
+
+#ifdef ST7565_ENABLE
+__attribute__((weak)) void st7565_on_user(void) {
+    ergodox_infinity_lcd_color(UINT16_MAX / 2, UINT16_MAX / 2, UINT16_MAX / 2);
+}
+
+__attribute__((weak)) void st7565_off_user(void) {
+    ergodox_infinity_lcd_color(0, 0, 0);
+}
+
+static void format_layer_bitmap_string(char* buffer, uint8_t offset) {
+    for (int i = 0; i < 16 && i + offset < MAX_LAYER; i++) {
+        if (i == 0 || i == 4 || i == 8 || i == 12) {
+            *buffer = ' ';
+            ++buffer;
+        }
+
+        uint8_t layer = i + offset;
+        if (layer_state_cmp(default_layer_state, layer)) {
+            *buffer = 'D';
+        } else if (layer_state_is(layer)) {
+            *buffer = '1';
+        } else {
+            *buffer = '_';
+        }
+        ++buffer;
+    }
+    *buffer = 0;
+}
+
+__attribute__((weak)) void st7565_task_user(void) {
+    if (is_keyboard_master()) {
+        // Draw led and layer status
+        led_t leds = host_keyboard_led_state();
+        if(leds.num_lock) { st7565_write("Num ", false); }
+        if(leds.caps_lock) { st7565_write("Cap ", false); }
+        if(leds.scroll_lock) { st7565_write("Scrl ", false); }
+        if(leds.compose) { st7565_write("Com ", false); }
+        if(leds.kana) { st7565_write("Kana", false); }
+        st7565_advance_page(true);
+
+        char layer_buffer[16 + 5];  // 3 spaces and one null terminator
+        st7565_set_cursor(0, 1);
+        format_layer_bitmap_string(layer_buffer, 0);
+        st7565_write_ln(layer_buffer, false);
+        format_layer_bitmap_string(layer_buffer, 16);
+        st7565_write_ln(layer_buffer, false);
+        st7565_write_ln("  1=On    D=Default", false);
+    } else {
+        // Draw logo
+        static const char qmk_logo[] = {
+            0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94,
+            0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4,
+            0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00
+        };
+
+        st7565_write(qmk_logo, false);
+        st7565_write("  Infinity  Ergodox  ", false);
+    }
+}
+#endif
+
+#if defined(SPLIT_KEYBOARD)
+void usart_master_init(SerialDriver **driver) {
+    PORTA->PCR[1] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(2);
+    PORTA->PCR[2] = PORTx_PCRn_DSE | PORTx_PCRn_SRE | PORTx_PCRn_MUX(2);
+
+    // driver is set to SD1 in config.h
+}
+
+void usart_slave_init(SerialDriver **driver) {
+    PORTE->PCR[0] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(3);
+    PORTE->PCR[1] = PORTx_PCRn_DSE | PORTx_PCRn_SRE | PORTx_PCRn_MUX(3);
+
+    *driver = &SD2;
+}
+#endif