Remove non-Keychron keyboards

1 files changed, 0 insertions, 253 deletions

diff --git a/keyboards/ingrained/matrix.c b/keyboards/ingrained/matrix.c
deleted file mode 100644
index 0dfb150b6c..0000000000
--- a/keyboards/ingrained/matrix.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
-Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
-          2020 Pierre Chevalier <pierrechevalier83@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * This code was heavily inspired by the ergodox_ez keymap, and modernized
- * to take advantage of the quantum.h microcontroller agnostics gpio control
- * abstractions and use the macros defined in config.h for the wiring as opposed
- * to repeating that information all over the place.
- */
-
-#include QMK_KEYBOARD_H
-#include "i2c_master.h"
-
-extern i2c_status_t mcp23017_status;
-#define I2C_TIMEOUT 1000
-
-// For a better understanding of the i2c protocol, this is a good read:
-// https://www.robot-electronics.co.uk/i2c-tutorial
-
-// I2C address:
-// See the datasheet, section 3.3.1 on addressing I2C devices and figure 3-6 for an
-// illustration
-// http://ww1.microchip.com/downloads/en/devicedoc/20001952c.pdf
-// All address pins of the mcp23017 are connected to the ground on the ferris
-// | 0  | 1  | 0  | 0  | A2 | A1 | A0 |
-// | 0  | 1  | 0  | 0  | 0  | 0  | 0  |
-#define I2C_ADDR 0b0100000
-#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE)
-#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ)
-
-// Register addresses
-// See https://github.com/adafruit/Adafruit-MCP23017-Arduino-Library/blob/master/Adafruit_MCP23017.h
-#define IODIRA 0x00  // i/o direction register
-#define IODIRB 0x01
-#define GPPUA 0x0C  // GPIO pull-up resistor register
-#define GPPUB 0x0D
-#define GPIOA 0x12  // general purpose i/o port register (write modifies OLAT)
-#define GPIOB 0x13
-#define OLATA 0x14  // output latch register
-#define OLATB 0x15
-
-bool         i2c_initialized = 0;
-i2c_status_t mcp23017_status = I2C_ADDR;
-
-uint8_t init_mcp23017(void) {
-    print("starting init");
-    mcp23017_status = I2C_ADDR;
-
-    // I2C subsystem
-    if (i2c_initialized == 0) {
-        i2c_init();  // on pins D(1,0)
-        i2c_initialized = true;
-        wait_ms(I2C_TIMEOUT);
-    }
-
-    // set pin direction
-    // - unused  : input  : 1
-    // - input   : input  : 1
-    // - driving : output : 0
-    // This means: we will read all the bits on GPIOA
-    // This means: we will write to the pins 0-4 on GPIOB (in select_rows)
-    uint8_t buf[]   = {IODIRA, 0b11111111, 0b11110000};
-    mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), I2C_TIMEOUT);
-    if (!mcp23017_status) {
-        // set pull-up
-        // - unused  : on  : 1
-        // - input   : on  : 1
-        // - driving : off : 0
-        // This means: we will read all the bits on GPIOA
-        // This means: we will write to the pins 0-4 on GPIOB (in select_rows)
-        uint8_t pullup_buf[] = {GPPUA, 0b11111111, 0b11110000};
-        mcp23017_status      = i2c_transmit(I2C_ADDR_WRITE, pullup_buf, sizeof(pullup_buf), I2C_TIMEOUT);
-    }
-    return mcp23017_status;
-}
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];  // debounced values
-
-static matrix_row_t read_cols(uint8_t row);
-static void         init_cols(void);
-static void         unselect_rows(void);
-static void         select_row(uint8_t row);
-
-static uint8_t mcp23017_reset_loop;
-
-void matrix_init_custom(void) {
-    // initialize row and col
-
-    mcp23017_status = init_mcp23017();
-
-    unselect_rows();
-    init_cols();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-    }
-}
-
-void matrix_power_up(void) {
-    mcp23017_status = init_mcp23017();
-
-    unselect_rows();
-    init_cols();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-    }
-}
-
-// Reads and stores a row, returning
-// whether a change occurred.
-static inline bool store_matrix_row(matrix_row_t current_matrix[], uint8_t index) {
-    matrix_row_t temp = read_cols(index);
-    if (current_matrix[index] != temp) {
-        current_matrix[index] = temp;
-        return true;
-    }
-    return false;
-}
-
-bool matrix_scan_custom(matrix_row_t current_matrix[]) {
-    if (mcp23017_status) {  // if there was an error
-        if (++mcp23017_reset_loop == 0) {
-            // if (++mcp23017_reset_loop >= 1300) {
-            // since mcp23017_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
-            // this will be approx bit more frequent than once per second
-            dprint("trying to reset mcp23017\n");
-            mcp23017_status = init_mcp23017();
-            if (mcp23017_status) {
-                dprint("right side not responding\n");
-            } else {
-                dprint("right side attached\n");
-            }
-        }
-    }
-
-    bool changed = false;
-    for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
-        // select rows from left and right hands
-        uint8_t left_index  = i;
-        uint8_t right_index = i + MATRIX_ROWS_PER_SIDE;
-        select_row(left_index);
-        select_row(right_index);
-
-        // we don't need a 30us delay anymore, because selecting a
-        // left-hand row requires more than 30us for i2c.
-
-        changed |= store_matrix_row(current_matrix, left_index);
-        changed |= store_matrix_row(current_matrix, right_index);
-
-        unselect_rows();
-    }
-
-    return changed;
-}
-
-static void init_cols(void) {
-    // init on mcp23017
-    // not needed, already done as part of init_mcp23017()
-
-    // init on mcu
-    pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_MCU;
-    for (int pin_index = 0; pin_index < MATRIX_COLS_PER_SIDE; pin_index++) {
-        pin_t pin = matrix_col_pins_mcu[pin_index];
-        setPinInput(pin);
-        writePinHigh(pin);
-    }
-}
-
-static matrix_row_t read_cols(uint8_t row) {
-    if (row < MATRIX_ROWS_PER_SIDE) {
-        pin_t        matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_MCU;
-        matrix_row_t current_row_value                         = 0;
-        // For each col...
-        for (uint8_t col_index = 0; col_index < MATRIX_COLS_PER_SIDE; col_index++) {
-            // Select the col pin to read (active low)
-            uint8_t pin_state = readPin(matrix_col_pins_mcu[col_index]);
-
-            // Populate the matrix row with the state of the col pin
-            current_row_value |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index);
-        }
-        return current_row_value;
-    } else {
-        if (mcp23017_status) {  // if there was an error
-            return 0;
-        } else {
-            uint8_t buf[]   = {GPIOA};
-            mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), I2C_TIMEOUT);
-            // We read all the pins on GPIOA.
-            // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero.
-            // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys.
-            // Since the pins connected to eact columns are sequential, and counting from zero up (col 5 -> GPIOA0, col 6 -> GPIOA1 and so on), the only transformation needed is a bitwise not to swap all zeroes and ones.
-            uint8_t data[] = {0};
-            if (!mcp23017_status) {
-                mcp23017_status = i2c_receive(I2C_ADDR_READ, data, sizeof(data), I2C_TIMEOUT);
-                data[0]         = ~(data[0]);
-            }
-            return data[0];
-        }
-    }
-}
-
-static void unselect_rows(void) {
-    // no need to unselect on mcp23017, because the select step sets all
-    // the other row bits high, and it's not changing to a different
-    // direction
-
-    // unselect rows on microcontroller
-    pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_MCU;
-    for (int pin_index = 0; pin_index < MATRIX_ROWS_PER_SIDE; pin_index++) {
-        pin_t pin = matrix_row_pins_mcu[pin_index];
-        setPinInput(pin);
-        writePinLow(pin);
-    }
-}
-
-static void select_row(uint8_t row) {
-    if (row < MATRIX_ROWS_PER_SIDE) {
-        // select on atmega32u4
-        pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_MCU;
-        pin_t pin                                       = matrix_row_pins_mcu[row];
-        setPinOutput(pin);
-        writePinLow(pin);
-    } else {
-        // select on mcp23017
-        if (mcp23017_status) {  // if there was an error
-                                // do nothing
-        } else {
-            // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one.
-            // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus.
-            uint8_t buf[]   = {GPIOB, 0xFF & ~(1 << (row - MATRIX_ROWS_PER_SIDE))};
-            mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), I2C_TIMEOUT);
-        }
-    }
-}