Remove non-Keychron keyboards

6 files changed, 0 insertions, 379 deletions

diff --git a/keyboards/idobao/id75/v2/config.h b/keyboards/idobao/id75/v2/config.h
deleted file mode 100644
index 4029d80bf8..0000000000
--- a/keyboards/idobao/id75/v2/config.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/* Copyright 2022 peepeetee
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B0, B3, C7, B6, C6 }
-#define MATRIX_COL_PINS { F6, F5, F4, F1, E6, D5, D3, D2, D1, D0, D4, D6, D7, B4, B5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-#undef RGB_DI_PIN
-#define RGB_DI_PIN F0
-#ifdef RGB_MATRIX_ENABLE
-#    define DRIVER_LED_TOTAL 85 /* 10 Bottom 75 top*/
-// RGB Matrix Animation modes. Explicitly enabled
-// For full list of effects, see:
-// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
-#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-#    define RGB_MATRIX_KEYPRESSES
-#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
-#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
-#    define ENABLE_RGB_MATRIX_BREATHING
-#    define ENABLE_RGB_MATRIX_BAND_SAT
-#    define ENABLE_RGB_MATRIX_BAND_VAL
-#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-#    define ENABLE_RGB_MATRIX_CYCLE_ALL
-#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
-// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
-#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
-#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
-// enabled only if RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-#    define ENABLE_RGB_MATRIX_SPLASH
-#    define ENABLE_RGB_MATRIX_MULTISPLASH
-#    define ENABLE_RGB_MATRIX_SOLID_SPLASH
-#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
-#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/idobao/id75/v2/info.json b/keyboards/idobao/id75/v2/info.json
deleted file mode 100644
index b1afe268de..0000000000
--- a/keyboards/idobao/id75/v2/info.json
+++ /dev/null
@@ -1,96 +0,0 @@
-{
-    "keyboard_name": "ID75",
-    "manufacturer": "IDOBAO",
-    "url": "",
-    "maintainer": "peepeetee",
-    "usb": {
-        "vid": "0x6964",
-        "pid": "0x0075",
-        "device_version": "0.0.2"
-    },
-    "layouts": {
-        "LAYOUT_ortho_5x15": {
-            "layout": [
-                {"x":0, "y":0},
-                {"x":1, "y":0},
-                {"x":2, "y":0},
-                {"x":3, "y":0},
-                {"x":4, "y":0},
-                {"x":5, "y":0},
-                {"x":6, "y":0},
-                {"x":7, "y":0},
-                {"x":8, "y":0},
-                {"x":9, "y":0},
-                {"x":10, "y":0},
-                {"x":11, "y":0},
-                {"x":12, "y":0},
-                {"x":13, "y":0},
-                {"x":14, "y":0},
-
-                {"x":0, "y":1},
-                {"x":1, "y":1},
-                {"x":2, "y":1},
-                {"x":3, "y":1},
-                {"x":4, "y":1},
-                {"x":5, "y":1},
-                {"x":6, "y":1},
-                {"x":7, "y":1},
-                {"x":8, "y":1},
-                {"x":9, "y":1},
-                {"x":10, "y":1},
-                {"x":11, "y":1},
-                {"x":12, "y":1},
-                {"x":13, "y":1},
-                {"x":14, "y":1},
-
-                {"x":0, "y":2},
-                {"x":1, "y":2},
-                {"x":2, "y":2},
-                {"x":3, "y":2},
-                {"x":4, "y":2},
-                {"x":5, "y":2},
-                {"x":6, "y":2},
-                {"x":7, "y":2},
-                {"x":8, "y":2},
-                {"x":9, "y":2},
-                {"x":10, "y":2},
-                {"x":11, "y":2},
-                {"x":12, "y":2},
-                {"x":13, "y":2},
-                {"x":14, "y":2},
-
-                {"x":0, "y":3},
-                {"x":1, "y":3},
-                {"x":2, "y":3},
-                {"x":3, "y":3},
-                {"x":4, "y":3},
-                {"x":5, "y":3},
-                {"x":6, "y":3},
-                {"x":7, "y":3},
-                {"x":8, "y":3},
-                {"x":9, "y":3},
-                {"x":10, "y":3},
-                {"x":11, "y":3},
-                {"x":12, "y":3},
-                {"x":13, "y":3},
-                {"x":14, "y":3},
-
-                {"x":0, "y":4},
-                {"x":1, "y":4},
-                {"x":2, "y":4},
-                {"x":3, "y":4},
-                {"x":4, "y":4},
-                {"x":5, "y":4},
-                {"x":6, "y":4},
-                {"x":7, "y":4},
-                {"x":8, "y":4},
-                {"x":9, "y":4},
-                {"x":10, "y":4},
-                {"x":11, "y":4},
-                {"x":12, "y":4},
-                {"x":13, "y":4},
-                {"x":14, "y":4}
-            ]
-        }
-    }
-}
diff --git a/keyboards/idobao/id75/v2/readme.md b/keyboards/idobao/id75/v2/readme.md
deleted file mode 100644
index 6e6209b467..0000000000
--- a/keyboards/idobao/id75/v2/readme.md
+++ /dev/null
@@ -1,27 +0,0 @@
-# ID75 v2
-
-![ID75 v2](https://i.imgur.com/KdAjS5f.jpg)
-
-A 5x15 ortholinear keyboard with hotswap sockets and north facing in switch RGB LEDs and RGB underglow
-
-* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
-* Hardware Supported: ID75 v2
-* Hardware Availability: https://idobao.net/products/idobao-id75-crystal-hot-swap-keyboard-kit?_pos=1&_sid=8758d3561&_ss=r
-
-Make example for this keyboard (after setting up your build environment):
-
-    make idobao/id75/v2:default
-
-Flashing example for this keyboard:
-
-    make idobao/id75/v2:default:flash
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-## Bootloader
-
-Enter the bootloader in 3 ways:
-
-* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
-* **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/idobao/id75/v2/rules.mk b/keyboards/idobao/id75/v2/rules.mk
deleted file mode 100644
index 303a814c3a..0000000000
--- a/keyboards/idobao/id75/v2/rules.mk
+++ /dev/null
@@ -1,24 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-LTO_ENABLE = yes            # Use link time optimization
-
-RGB_MATRIX_ENABLE = yes
-RGB_MATRIX_DRIVER = WS2812
-
-LAYOUTS = ortho_5x15
diff --git a/keyboards/idobao/id75/v2/v2.c b/keyboards/idobao/id75/v2/v2.c
deleted file mode 100644
index f65a9e3362..0000000000
--- a/keyboards/idobao/id75/v2/v2.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Copyright 2022 peepeetee
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "v2.h"
-
-#ifdef RGB_MATRIX_ENABLE
-led_config_t g_led_config = { {
-    // Key Matrix to LED Index
-{ 84, 83, 82, 81, 80, 79, 78, 77, 76, 75, 74, 73, 72, 71, 70 },
-{ 69, 68, 67, 66, 65, 64, 63, 62, 61, 60, 59, 58, 57, 56, 55 },
-{ 54, 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, 40 },
-{ 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25 },
-{ 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12, 11, 10 }
-}, {
-    // LED Index to Physical Position
-{8, 12},{60, 12},{112, 12},{164, 12},{216, 12},
-{216, 60},{164, 60},{112, 60},{60, 60},{8, 60},
-
-
-{224, 64}, {208, 64}, {192, 64}, {176, 64}, {160, 64}, {144, 64}, {128, 64}, {112, 64}, {96, 64}, {80, 64}, {64, 64}, {48, 64}, {32, 64}, {16, 64}, {0, 64},
-{224, 48}, {208, 48}, {192, 48}, {176, 48}, {160, 48}, {144, 48}, {128, 48}, {112, 48}, {96, 48}, {80, 48}, {64, 48}, {48, 48}, {32, 48}, {16, 48}, {0, 48},
-{224, 32}, {208, 32}, {192, 32}, {176, 32}, {160, 32}, {144, 32}, {128, 32}, {112, 32}, {96, 32}, {80, 32}, {64, 32}, {48, 32}, {32, 32}, {16, 32}, {0, 32},
-{224, 16}, {208, 16}, {192, 16}, {176, 16}, {160, 16}, {144, 16}, {128, 16}, {112, 16}, {96, 16}, {80, 16}, {64, 16}, {48, 16}, {32, 16}, {16, 16}, {0, 16},
-{224,  0}, {208,  0}, {192,  0}, {176,  0}, {160,  0}, {144,  0}, {128,  0}, {112,  0}, {96,  0}, {80,  0}, {64,  0}, {48,  0}, {32,  0}, {16,  0}, {0,  0},
-
-}, {
-    // LED Index to Flag
-2,2,2,2,2,2,2,2,2,2,
-4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
-4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
-4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
-4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
-4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
-
-} };
-
-#endif
diff --git a/keyboards/idobao/id75/v2/v2.h b/keyboards/idobao/id75/v2/v2.h
deleted file mode 100644
index 9643a1efd3..0000000000
--- a/keyboards/idobao/id75/v2/v2.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* Copyright 2018 MechMerlin
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-/* This a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT_ortho_5x15( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
-    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
-    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \
-    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
-    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E \
-) { \
-    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
-    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
-    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \
-    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \
-    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E } \
-}