[Keyboard] Update Tractyl Manuform config for F411 (#14770)

5 files changed, 43 insertions, 20 deletions

diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
index 7fb97cd2a4..b2a240f9ff 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
@@ -31,22 +31,23 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define DIODE_DIRECTION     COL2ROW
 
-#define USB_VBUS_PIN        B10
+// #define USB_VBUS_PIN        B10 // doesn't seem to work for me on one of my controllers... */
 #define SPLIT_HAND_PIN      C14  // high = left, low = right
 
 // WS2812 RGB LED strip input and number of LEDs
 #define RGB_DI_PIN          A1
-#define WS2812_PWM_DRIVER   PWMD5  // default: PWMD2
+#define WS2812_PWM_DRIVER   PWMD2  // default: PWMD2
 #define WS2812_PWM_CHANNEL  2      // default: 2
-#define WS2812_PWM_PAL_MODE 2      // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+#define WS2812_PWM_PAL_MODE 1      // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
 //#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
-#define WS2812_DMA_STREAM   STM32_DMA1_STREAM0  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#define WS2812_DMA_CHANNEL  6                   // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#define WS2812_DMA_STREAM   STM32_DMA1_STREAM7  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#define WS2812_DMA_CHANNEL  3                   // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
 
 #define RGBLED_NUM          20
 #define RGBLIGHT_SPLIT
 #define RGBLED_SPLIT \
     { 10, 10 }
+#define RGBLIGHT_LIMIT_VAL 80
 
 #define DEBUG_LED_PIN      C13
 
@@ -68,13 +69,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* i2c config for oleds */
 #define I2C_DRIVER        I2CD1
-#define I2C1_SCL_BANK     GPIOB
-#define I2C1_SDA_BANK     GPIOB
-#define I2C1_SCL          8
-#define I2C1_SDA          9
+#define I2C1_SCL_PIN      B8
+#define I2C1_SDA_PIN      B9
 #define I2C1_SCL_PAL_MODE 4
 #define I2C1_SDA_PAL_MODE 4
-#define I2C1_CLOCK_SPEED  400000
+// #define I2C1_CLOCK_SPEED  400000
+/* For Legacy Compatibility: */
+#define I2C1_SCL 8
+#define I2C1_SDA 9
 
 /* encoder config */
 #define ENCODERS_PAD_A \
@@ -93,7 +95,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* eeprom config */
 #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
-#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR    8
+#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR    64
 // #define EXTERNAL_EEPROM_BYTE_COUNT           8196
 // #define EXTERNAL_EEPROM_PAGE_SIZE            32
 // #define EXTERNAL_EEPROM_ADDRESS_SIZE         2
@@ -102,4 +104,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* pmw3360 config  */
 #define PMW3360_CS_PIN                       B0
 #define PMW3360_SPI_MODE                     3
-#define PMW3360_SPI_DIVISOR                  4
+#define PMW3360_SPI_DIVISOR                  64
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c
index 394c597b84..700b0685f2 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c
@@ -24,8 +24,10 @@ void matrix_scan_sub_kb(void) {
     }
 }
 
+#ifdef USB_VBUS_PIN
 bool usb_vbus_state(void) {
     setPinInputLow(USB_VBUS_PIN);
     wait_us(5);
     return readPin(USB_VBUS_PIN);
 }
+#endif
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h
index 053f0aa517..d868eae48e 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h
@@ -21,17 +21,35 @@
 #undef STM32_I2C_USE_I2C1
 #define STM32_I2C_USE_I2C1 TRUE
 
-#undef STM32_PWM_USE_TIM5
-#define STM32_PWM_USE_TIM5 TRUE
+#undef STM32_I2C_I2C1_RX_DMA_STREAM
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#undef STM32_I2C_I2C1_TX_DMA_STREAM
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2 TRUE
 
 #undef STM32_PWM_USE_TIM3
 #define STM32_PWM_USE_TIM3 TRUE
 
 #undef STM32_SPI_USE_SPI1
-#define STM32_SPI_USE_SPI1 TRUE
+#define STM32_SPI_USE_SPI1           TRUE
+
+#undef STM32_SPI_SPI1_RX_DMA_STREAM
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#undef STM32_SPI_SPI1_TX_DMA_STREAM
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
 
 #undef STM32_SERIAL_USE_USART2
 #define STM32_SERIAL_USE_USART2 TRUE
 
+#undef STM32_UART_USART2_RX_DMA_STREAM
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#undef STM32_UART_USART2_TX_DMA_STREAM
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+
 #undef STM32_GPT_USE_TIM4
 #define STM32_GPT_USE_TIM4 TRUE
+
+#undef STM32_ST_USE_TIMER
+#define STM32_ST_USE_TIMER 5
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md
index 4571e18045..6377613814 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md
@@ -4,11 +4,12 @@
 * Split Hand Pin, using PC14
 * Full Duplex Serial/USART using PA3 and PA4 on USART2
 * PWM Audio using PB1 and TIM3 and GPT on TIM4
-* PWM RGB using PA1 TIM5
+* PWM RGB using PA1 TIM2
 * pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin
 * 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin
-* Encoder using PA10 and PA12
+* Encoder using PA13 and PA14
 * SSD1306 OLED display (128x64) using PB8-PB9 on I2C1
+* Pull-up resistor (22k) on A10 to fix reset issue.
 
 * Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna)
 * Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/)
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c
index 67842c26d0..f209206337 100644
--- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c
+++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c
@@ -117,8 +117,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [_ADJUST] = LAYOUT_5x6_right_wrapper(
         KC_MAKE, ___________________BLANK___________________,                      _________________ADJUST_R1_________________, KC_RST,
         VRSN,    _________________ADJUST_L1_________________,                      _________________ADJUST_R1_________________, EEP_RST,
-        UC_MOD,  _________________ADJUST_L2_________________,                      _________________ADJUST_R2_________________, TG_MODS,
-        _______, _________________ADJUST_L3_________________,                      _________________ADJUST_R3_________________, KC_MPLY,
+        _______, _________________ADJUST_L2_________________,                      _________________ADJUST_R2_________________, TG_MODS,
+        UC_MOD,  _________________ADJUST_L3_________________,                      _________________ADJUST_R3_________________, KC_MPLY,
                           HPT_DWLI, HPT_DWLD,                                                        TG_GAME, TG_DBLO,
                                             HPT_TOG, HPT_BUZ,                               KC_NUKE,
                                                      _______, _______,             _______,
@@ -350,7 +350,7 @@ void render_kitty(void) {
     // assumes 1 frame prep stage
     extern bool swap_hands;
     void        animation_phase(void) {
-        if (swap_hands) {
+        if (tap_toggling) {
             anim_frame_duration = 300;
             current_rtogi_frame = (current_rtogi_frame + 1) % RTOGI_FRAMES;
             oled_write_raw_P(rtogi[abs((RTOGI_FRAMES - 1) - current_rtogi_frame)], ANIM_SIZE);