Remove non-Keychron keyboards

7 files changed, 0 insertions, 274 deletions

diff --git a/keyboards/handwired/magicforce68/config.h b/keyboards/handwired/magicforce68/config.h
deleted file mode 100644
index 7eab860061..0000000000
--- a/keyboards/handwired/magicforce68/config.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
-#define MATRIX_COL_PINS { B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/handwired/magicforce68/info.json b/keyboards/handwired/magicforce68/info.json
deleted file mode 100644
index 82f329e29d..0000000000
--- a/keyboards/handwired/magicforce68/info.json
+++ /dev/null
@@ -1,85 +0,0 @@
-{
-    "keyboard_name": "Magicforce 68",
-    "manufacturer": "Hexwire",
-    "url": "",
-    "maintainer": "qmk",
-    "usb": {
-        "vid": "0xFEED",
-        "pid": "0x6060",
-        "device_version": "0.0.1"
-    },
-    "layouts": {
-        "LAYOUT": {
-            "layout": [
-                {"label":"`", "x":0, "y":0},
-                {"label":"1", "x":1, "y":0},
-                {"label":"2", "x":2, "y":0},
-                {"label":"3", "x":3, "y":0},
-                {"label":"4", "x":4, "y":0},
-                {"label":"5", "x":5, "y":0},
-                {"label":"6", "x":6, "y":0},
-                {"label":"7", "x":7, "y":0},
-                {"label":"8", "x":8, "y":0},
-                {"label":"9", "x":9, "y":0},
-                {"label":"0", "x":10, "y":0},
-                {"label":"-", "x":11, "y":0},
-                {"label":"=", "x":12, "y":0},
-                {"label":"Backspace", "x":13, "y":0, "w":2},
-                {"label":"Insert", "x":15.25, "y":0},
-                {"label":"Page Up", "x":16.25, "y":0},
-                {"label":"Tab", "x":0, "y":1, "w":1.5},
-                {"label":"Q", "x":1.5, "y":1},
-                {"label":"W", "x":2.5, "y":1},
-                {"label":"E", "x":3.5, "y":1},
-                {"label":"R", "x":4.5, "y":1},
-                {"label":"T", "x":5.5, "y":1},
-                {"label":"Y", "x":6.5, "y":1},
-                {"label":"U", "x":7.5, "y":1},
-                {"label":"I", "x":8.5, "y":1},
-                {"label":"O", "x":9.5, "y":1},
-                {"label":"P", "x":10.5, "y":1},
-                {"label":"[", "x":11.5, "y":1},
-                {"label":"]", "x":12.5, "y":1},
-                {"label":"\\", "x":13.5, "y":1, "w":1.5},
-                {"label":"Delete", "x":15.25, "y":1},
-                {"label":"Page Down", "x":16.25, "y":1},
-                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
-                {"label":"A", "x":1.75, "y":2},
-                {"label":"S", "x":2.75, "y":2},
-                {"label":"D", "x":3.75, "y":2},
-                {"label":"F", "x":4.75, "y":2},
-                {"label":"G", "x":5.75, "y":2},
-                {"label":"H", "x":6.75, "y":2},
-                {"label":"J", "x":7.75, "y":2},
-                {"label":"K", "x":8.75, "y":2},
-                {"label":"L", "x":9.75, "y":2},
-                {"label":";", "x":10.75, "y":2},
-                {"label":"'", "x":11.75, "y":2},
-                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
-                {"label":"Shift", "x":0, "y":3, "w":2.25},
-                {"label":"Z", "x":2.25, "y":3},
-                {"label":"X", "x":3.25, "y":3},
-                {"label":"C", "x":4.25, "y":3},
-                {"label":"V", "x":5.25, "y":3},
-                {"label":"B", "x":6.25, "y":3},
-                {"label":"N", "x":7.25, "y":3},
-                {"label":"M", "x":8.25, "y":3},
-                {"label":",", "x":9.25, "y":3},
-                {"label":".", "x":10.25, "y":3},
-                {"label":"/", "x":11.25, "y":3},
-                {"label":"Shift", "x":12.25, "y":3, "w":2.75},
-                {"label":"Up", "x":15.25, "y":3},
-                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
-                {"label":"GUI", "x":1.25, "y":4, "w":1.25},
-                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
-                {"label":"Space", "x":3.75, "y":4, "w":6.25},
-                {"label":"Fn", "x":10, "y":4, "w":1.25},
-                {"label":"Alt", "x":11.25, "y":4, "w":1.25},
-                {"label":"Ctrl", "x":12.5, "y":4, "w":1.25},
-                {"label":"Left", "x":14.25, "y":4},
-                {"label":"Down", "x":15.25, "y":4},
-                {"label":"Right", "x":16.25, "y":4}
-            ]
-        }
-    }
-}
diff --git a/keyboards/handwired/magicforce68/keymaps/default/keymap.c b/keyboards/handwired/magicforce68/keymaps/default/keymap.c
deleted file mode 100644
index a52c2ec4a4..0000000000
--- a/keyboards/handwired/magicforce68/keymaps/default/keymap.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define _QWERTY 0
-#define _FN1 1
-#define _FN2 2
-
-#define KC_X0 LT(_FN2, KC_GRV)
-#define KC_X1 MO(_FN1)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT(
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_INS,  KC_PGUP,
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_PGDN,
-    KC_X0,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                   KC_RSFT,          KC_UP,
-    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_X1,   KC_RALT, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
-  ),
-
-  [_FN1] = LAYOUT(
-    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_BSPC,          KC_VOLU, KC_HOME,
-    _______, _______, _______, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          KC_VOLD, KC_END,
-    _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______,          _______,
-    _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, _______,                   _______,          KC_MUTE,
-    _______, _______, _______,                            _______,                            _______, _______, _______,          KC_MPRV, KC_MPLY, KC_MNXT
-  ),
-
-  [_FN2] = LAYOUT(
-    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_BSPC,          KC_VOLU, KC_HOME,
-    _______, _______, _______, KC_UP,   _______, _______, _______, KC_7,    KC_8,    KC_9,    _______, _______, _______, _______,          KC_VOLD, KC_END,
-    _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_4,    KC_5,    KC_6,    _______, _______,          _______,
-    _______, _______, _______, _______, _______, _______, KC_0,    KC_1,    KC_2,    KC_3,    _______,                   _______,          KC_MUTE,
-    _______, _______, _______,                            _______,                            _______, _______, _______,          KC_MPRV, KC_MPLY, KC_MNXT
-  )
-};
diff --git a/keyboards/handwired/magicforce68/magicforce68.c b/keyboards/handwired/magicforce68/magicforce68.c
deleted file mode 100644
index 8d74f1438b..0000000000
--- a/keyboards/handwired/magicforce68/magicforce68.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "magicforce68.h"
diff --git a/keyboards/handwired/magicforce68/magicforce68.h b/keyboards/handwired/magicforce68/magicforce68.h
deleted file mode 100644
index 829e5932b5..0000000000
--- a/keyboards/handwired/magicforce68/magicforce68.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-#define XXX KC_NO
-
-#define LAYOUT( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k2E, \
-    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k3E, \
-    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B,   k2C, \
-    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A,        k3C,    k3D, \
-    k40, k41, k42,           k45,                k49, k4A, k4B,      k4C, k4D, k4E \
-) { \
-    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
-    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
-    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, XXX, k2E }, \
-    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, XXX, k3C, k3D, k3E }, \
-    { k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4A, k4B, k4C, k4D, k4E } \
-}
diff --git a/keyboards/handwired/magicforce68/readme.md b/keyboards/handwired/magicforce68/readme.md
deleted file mode 100644
index 5b5ade3b7f..0000000000
--- a/keyboards/handwired/magicforce68/readme.md
+++ /dev/null
@@ -1,24 +0,0 @@
-# Magicforce 68 Handwired
-
-This firmware is for a Magicforce 68 that's had its PCB removed and is handwired with an Arduino Micro. NOTE: The Arduino Micro is different than the Arduino *Pro* Micro.
-
-Keyboard Maintainer: [The QMK Community](https://github.com/qmk)  
-Hardware Supported: magicforce68, Arduino Micro  
-
-## Wiring Layout
-
-![Wiring Layout](http://i.imgur.com/NmTCv5u.png)
-
-## Pinout
-
-The following pins are used:
-- Columns 1-15: B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6
-- Rows 1-5: F0, F1, F4, F5, F6
-
-Make example for this keyboard (after setting up your build environment):
-
-    make handwired/magicforce68:default
-
-To flash the firmware onto the microcontroller, run `make handwired/magicforce68:default:avrdude`, and press the reset button.
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/handwired/magicforce68/rules.mk b/keyboards/handwired/magicforce68/rules.mk
deleted file mode 100644
index 63aadefc79..0000000000
--- a/keyboards/handwired/magicforce68/rules.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output