Remove non-Keychron keyboards

9 files changed, 0 insertions, 345 deletions

diff --git a/keyboards/handwired/kbod/config.h b/keyboards/handwired/kbod/config.h
deleted file mode 100644
index 44046dcfa1..0000000000
--- a/keyboards/handwired/kbod/config.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 8
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7, D6 }
-#define MATRIX_COL_PINS { D0, D1, F0, F1, F4, F5, F6, F7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-#undef TAPPING_TOGGLE
-#define TAPPING_TOGGLE 2
diff --git a/keyboards/handwired/kbod/info.json b/keyboards/handwired/kbod/info.json
deleted file mode 100644
index 3c62ad9f74..0000000000
--- a/keyboards/handwired/kbod/info.json
+++ /dev/null
@@ -1,78 +0,0 @@
-{
-    "keyboard_name": "kbod",
-    "manufacturer": "fudanchii",
-    "url": "",
-    "maintainer": "qmk",
-    "usb": {
-        "vid": "0xFEED",
-        "pid": "0x6060",
-        "device_version": "0.0.1"
-    },
-    "layouts": {
-        "LAYOUT": {
-            "layout": [
-                {"label":"`", "x":0, "y":0},
-                {"label":"1", "x":1, "y":0},
-                {"label":"2", "x":2, "y":0},
-                {"label":"3", "x":3, "y":0},
-                {"label":"4", "x":4, "y":0},
-                {"label":"5", "x":5, "y":0},
-                {"label":"6", "x":6, "y":0},
-                {"label":"7", "x":7, "y":0},
-                {"label":"8", "x":8, "y":0},
-                {"label":"9", "x":9, "y":0},
-                {"label":"0", "x":10, "y":0},
-                {"label":"-", "x":11, "y":0},
-                {"label":"=", "x":12, "y":0},
-                {"label":"Backspace", "x":13, "y":0, "w":2},
-                {"label":"Tab", "x":0, "y":1, "w":1.5},
-                {"label":"Q", "x":1.5, "y":1},
-                {"label":"W", "x":2.5, "y":1},
-                {"label":"E", "x":3.5, "y":1},
-                {"label":"R", "x":4.5, "y":1},
-                {"label":"T", "x":5.5, "y":1},
-                {"label":"Y", "x":6.5, "y":1},
-                {"label":"U", "x":7.5, "y":1},
-                {"label":"I", "x":8.5, "y":1},
-                {"label":"O", "x":9.5, "y":1},
-                {"label":"P", "x":10.5, "y":1},
-                {"label":"[", "x":11.5, "y":1},
-                {"label":"]", "x":12.5, "y":1},
-                {"label":"\\", "x":13.5, "y":1, "w":1.5},
-                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
-                {"label":"A", "x":1.75, "y":2},
-                {"label":"S", "x":2.75, "y":2},
-                {"label":"D", "x":3.75, "y":2},
-                {"label":"F", "x":4.75, "y":2},
-                {"label":"G", "x":5.75, "y":2},
-                {"label":"H", "x":6.75, "y":2},
-                {"label":"J", "x":7.75, "y":2},
-                {"label":"K", "x":8.75, "y":2},
-                {"label":"L", "x":9.75, "y":2},
-                {"label":";", "x":10.75, "y":2},
-                {"label":"'", "x":11.75, "y":2},
-                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
-                {"label":"Shift", "x":0, "y":3, "w":2.25},
-                {"label":"Z", "x":2.25, "y":3},
-                {"label":"X", "x":3.25, "y":3},
-                {"label":"C", "x":4.25, "y":3},
-                {"label":"V", "x":5.25, "y":3},
-                {"label":"B", "x":6.25, "y":3},
-                {"label":"N", "x":7.25, "y":3},
-                {"label":"M", "x":8.25, "y":3},
-                {"label":",", "x":9.25, "y":3},
-                {"label":".", "x":10.25, "y":3},
-                {"label":"/", "x":11.25, "y":3},
-                {"label":"Shift", "x":12.25, "y":3, "w":2.75},
-                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
-                {"label":"GUI", "x":1.25, "y":4, "w":1.25},
-                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
-                {"label":"Space", "x":3.75, "y":4, "w":6.25},
-                {"label":"Alt", "x":10, "y":4, "w":1.25},
-                {"label":"GUI", "x":11.25, "y":4, "w":1.25},
-                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
-                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
-            ]
-        }
-    }
-}
diff --git a/keyboards/handwired/kbod/kbod.c b/keyboards/handwired/kbod/kbod.c
deleted file mode 100644
index c229d267b1..0000000000
--- a/keyboards/handwired/kbod/kbod.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "kbod.h"
diff --git a/keyboards/handwired/kbod/kbod.h b/keyboards/handwired/kbod/kbod.h
deleted file mode 100644
index 86ff0e8ead..0000000000
--- a/keyboards/handwired/kbod/kbod.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-#define XXX KC_NO
-
-#define LAYOUT( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k10, k11, k12, k13, k14,    k15, \
-    k20,    k21, k22, k23, k24, k25, k26, k27, k30, k31, k32, k33, k34, k35, \
-    k40,     k41, k42, k43, k44, k45, k46, k47, k50, k51, k52, k53,     k54, \
-    k60,      k61, k62, k63, k64, k65, k66, k67, k55, k56, k57,         k37, \
-    k70,  k71,  k72,               k73,               k74,  k75,  k76,  k77 \
-) { \
-    { k00, k01, k02, k03, k04, k05, k06, k07 }, \
-    { k10, k11, k12, k13, k14, k15, XXX, XXX }, \
-    { k20, k21, k22, k23, k24, k25, k26, k27 }, \
-    { k30, k31, k32, k33, k34, k35, XXX, k37 }, \
-    { k40, k41, k42, k43, k44, k45, k46, k47 }, \
-    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
-    { k60, k61, k62, k63, k64, k65, k66, k67 }, \
-    { k70, k71, k72, k73, k74, k75, k76, k77 } \
-}
diff --git a/keyboards/handwired/kbod/keymaps/default/keymap.c b/keyboards/handwired/kbod/keymaps/default/keymap.c
deleted file mode 100644
index 0ffc3e9d97..0000000000
--- a/keyboards/handwired/kbod/keymaps/default/keymap.c
+++ /dev/null
@@ -1,98 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define MODS_PRESSED(btn)  (get_mods() & (MOD_BIT(KC_L##btn)|MOD_BIT(KC_R##btn)))
-
-enum custom_keycodes {
-  SFT_ESC = SAFE_RANGE,
-  ALT_F4
-};
-
-#define SET_WHETHER(mask, btn1, btn2) \
-if (record->event.pressed) {          \
-    if (mask) {                       \
-        add_key(btn2);                \
-        send_keyboard_report();       \
-    } else {                          \
-        add_key(btn1);                \
-        send_keyboard_report();       \
-    }                                 \
-} else {                              \
-    if (mask) {                       \
-        del_key(btn2);                \
-        send_keyboard_report();       \
-    } else {                          \
-        del_key(btn1);                \
-        send_keyboard_report();       \
-    }                                 \
-}                                     \
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  LAYOUT( /* Base */
-    SFT_ESC, KC_1,    KC_2,    KC_3,    ALT_F4,  KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
-    KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,
-    TT(1),   KC_LCTL, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, KC_APP,  KC_RCTL
-  ),
-  LAYOUT( /* Cursor layer */
-    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
-    TT(3),   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS,
-    TT(2),   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME,          _______,
-    _______,          _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_PGDN, KC_END,           KC_UP,
-    _______, _______, _______,                            _______,                            _______, KC_LEFT, KC_DOWN, KC_RGHT
-  ),
-  LAYOUT( /* Keypad layer */
-    TO(0),   KC_1,    KC_2,    KC_3,    ALT_F4,  KC_5,    KC_6,    KC_P7,   KC_P8,   KC_P9,   KC_P0,   KC_PMNS, KC_PPLS, KC_BSPC,
-    _______, _______, _______, _______, _______, _______, _______, KC_P4,   KC_P5,   KC_P6,   _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, KC_P1,   KC_P2,   KC_P3,   _______, _______,          _______,
-    _______,          _______, _______, _______, _______, _______, _______, KC_P0,   KC_PDOT, KC_BTN1, KC_MS_U,          KC_BTN2,
-    _______, _______, _______,                            _______,                            KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN3
-  ),
-  LAYOUT( /* Multimedia layer */
-    TO(0),   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______,
-    _______, _______, KC_WAKE, _______, _______, _______, _______, _______, _______, _______, KC_MSTP, KC_MPRV, KC_MNXT, _______,
-    _______, _______, KC_SLEP, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
-    _______,          _______, KC_PWR,  _______, _______, _______, _______, _______, _______, KC_BTN1, KC_WH_U,          KC_BTN2,
-    _______, _______, _______,                            KC_MPLY,                            KC_WH_L, KC_WH_D, KC_WH_R, KC_BTN3
-  ),
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case SFT_ESC:
-      SET_WHETHER(MODS_PRESSED(SHIFT), KC_ESC, KC_GRAVE);
-
-      return false;
-
-    case ALT_F4:
-      SET_WHETHER(MODS_PRESSED(ALT), KC_4, KC_F4);
-
-      return false;
-
-    default:
-      return true;
-  }
-}
-
-void led_set_user(uint8_t usb_led) {
-  if (usb_led & _BV(USB_LED_CAPS_LOCK)) {
-    PORTB |= _BV(PB0);
-  } else {
-    PORTB &= ~_BV(PB0);
-  }
-}
-
-void matrix_init_user(void) {
-  DDRB |= _BV(PB0);
-  DDRC |= _BV(PC7);
-}
-
-void matrix_scan_user(void) {
-  uint8_t layer = get_highest_layer(layer_state);
-  if (layer) {
-    PORTC |= _BV(PC7);
-  } else {
-    PORTC &= ~_BV(PC7);
-  }
-}
diff --git a/keyboards/handwired/kbod/keymaps/default/readme.md b/keyboards/handwired/kbod/keymaps/default/readme.md
deleted file mode 100644
index 35c22ec007..0000000000
--- a/keyboards/handwired/kbod/keymaps/default/readme.md
+++ /dev/null
@@ -1,5 +0,0 @@
-# The default keymap for kbod
-
-This is the default keymap for kbod,
-
-it consists of a base layer with QWERTY layout, a momentary cursor-layer, and mouse-keys and multimedia layers.
\ No newline at end of file
diff --git a/keyboards/handwired/kbod/keymaps/default/rules.mk b/keyboards/handwired/kbod/keymaps/default/rules.mk
deleted file mode 100644
index 0db36fdd09..0000000000
--- a/keyboards/handwired/kbod/keymaps/default/rules.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
diff --git a/keyboards/handwired/kbod/readme.md b/keyboards/handwired/kbod/readme.md
deleted file mode 100644
index 470ccce0e3..0000000000
--- a/keyboards/handwired/kbod/readme.md
+++ /dev/null
@@ -1,18 +0,0 @@
-# KBOD
-
-![KBOD](https://f4.fudanchii.net/shx/2017/02/IMG_20170212_224547.jpg)
-
-KBOD is a 60% Keyboard kit, hand-wired, with Arduino Micro as its controller. It utilizes an 8x8 matrix and has layout similar to GH60. [More info](https://github.com/fudanchii/keyboard_of_disapproval)
-
-Keyboard Maintainer: [The QMK Community](https://github.com/qmk)  
-Hardware Supported: Arduino Micro  
-
-Make example for this keyboard (after setting up your build environment):
-
-    make handwired/kbod:default
-
-Flashing your firmware may be done with avrdude. The command should be something along this line:
-
-    avrdude -p m32u4 -c avr109 -P <COM PORT> -C <avrdude conf file> -e -u flash:w:handwired_kbod_default.hex
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/handwired/kbod/rules.mk b/keyboards/handwired/kbod/rules.mk
deleted file mode 100644
index 8d562b0bd1..0000000000
--- a/keyboards/handwired/kbod/rules.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no        # Console for debug
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output