diff options
| author | lokher <lokher@gmail.com> | 2022-12-06 17:10:48 +0800 |
|---|---|---|
| committer | lokher <lokher@gmail.com> | 2022-12-07 15:50:49 +0800 |
| commit | a336c2c5005251e4cb0f3a62ccabdb4cfccad915 (patch) | |
| tree | 3c948b631a5e3b6f940dabe02fad3c7487e6f350 /keyboards/handwired/hwpm87/readme.md | |
| parent | 27fc28fd2ff52e079a5bc58d6aaea4c752420615 (diff) | |
Merge upstream master to 2022 Q4 breaking change
Diffstat (limited to 'keyboards/handwired/hwpm87/readme.md')
| -rw-r--r-- | keyboards/handwired/hwpm87/readme.md | 35 |
1 files changed, 0 insertions, 35 deletions
diff --git a/keyboards/handwired/hwpm87/readme.md b/keyboards/handwired/hwpm87/readme.md deleted file mode 100644 index f0f4b3db2e..0000000000 --- a/keyboards/handwired/hwpm87/readme.md +++ /dev/null @@ -1,35 +0,0 @@ -# Handwired 87 keys - - - -Repaired from 87 keys keyboard using a Pro Micro - -* Keyboard Maintainer: [KD-MM2](https://github.com/KD-MM2) -* Hardware Supported: Pro Micro(need to solder more pins) or any board with ATMega32u4 -* Hardware Availability: N/A (private board, might open source) - -First, if you have Pro Micro - Checkout these image for more:   - Keymaps/Handwiring:  -If you have 25 GPIOs board, there is nothing to do. - -Second, if you are using a Capslock LED, define LED pin in: [config.h#34](https://github.com/KD-MM2/qmk_firmware/blob/hwpm87/keyboards/hwpm87/config.h#L34), -and check the LED_PIN_ON_STATE if you get reversed led state: [config.h#35](https://github.com/KD-MM2/qmk_firmware/blob/hwpm87/keyboards/hwpm87/config.h#L35) - -Make example for this keyboard (after setting up your build environment): - - make handwired/hwpm87:default - -Flashing example for this keyboard: - - make handwired/hwpm87:default:flash - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -## Bootloader - -Enter the bootloader in 3 ways: - -* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -* **Physical reset button**: Plug cable, open QMK Toolbox and short RST pin and GND pin, then you will see it in flashmode -* **Keycode in layout**: Press the key mapped to `RESET` if it is available |