GH60 Refactor: Move Satan into GH60 directory (#6485)

* Move Satan into the GH60 directory to avoid the confusion of what PCB people have

* set bootmagic to lite

* rename gh60 file to revc

2 files changed, 194 insertions, 0 deletions

diff --git a/keyboards/gh60/revc/keymaps/dbroqua_7U/keymap.c b/keyboards/gh60/revc/keymaps/dbroqua_7U/keymap.c
new file mode 100644
index 0000000000..74ff97a931
--- /dev/null
+++ b/keyboards/gh60/revc/keymaps/dbroqua_7U/keymap.c
@@ -0,0 +1,87 @@
+#include QMK_KEYBOARD_H
+
+#define _DEFAULT 0
+#define _FN 1
+
+int esc_led = 0;
+
+// Fillers to make layering more clear
+#define ______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty gui/alt/space/alt/gui
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RShift    | FN  |
+ * |-----------------------------------------------------------------------------------------+
+ *         |LGUI | LAlt  |               Space                | RAlt   |RGUI |
+ *         `-----------------------------------------------------------------'
+ */
+  [_DEFAULT] = LAYOUT_60_ansi_split_bs_rshift( /* Basic QWERTY */
+      KC_ESC,  KC_1,    KC_2,    KC_3, KC_4, KC_5,   KC_6, KC_7, KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV, \
+      KC_TAB,  KC_Q,    KC_W,    KC_E, KC_R, KC_T,   KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,  \
+      KC_LCTL, KC_A,    KC_S,    KC_D, KC_F, KC_G,   KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  \
+      KC_LSFT, KC_Z,    KC_X,    KC_C, KC_V, KC_B,   KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(_FN), \
+      ______,  KC_LGUI, KC_LALT,             KC_SPC,             ______,  KC_RALT, KC_RGUI, ______ \
+      ),
+
+/* FN Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * | Led | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+ * |-----------------------------------------------------------------------------------------+
+ * |  CAPS  |     |     |     |     |     |     |     | Psc | Slck| Paus| Up  |     |        |
+ * |-----------------------------------------------------------------------------------------+
+ * |         | Vol-| Vol+| Mute|     |     | *   | /   | Home| PgUp| Left|Right|             |
+ * |-----------------------------------------------------------------------------------------+
+ * |           | Prev| Play| Next|     |     | +   | -   | End  |PgDn| Down|           |     |
+ * |-----------------------------------------------------------------------------------------+
+ *         |       |       |                                 | Stop  |       |
+ *         `-----------------------------------------------------------------'
+ */
+  [_FN] = LAYOUT_60_ansi_split_bs_rshift( /* Layer 1 */
+      F(0),   KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11, KC_F12, KC_INS,  KC_DEL, \
+      KC_CAPS, ______,  ______,  ______,  ______, ______, ______,  ______,  KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,  ______, ______,  \
+      ______,  KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______,   \
+      ______,  KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, ______, ______,  \
+      ______,  ______,  ______,                   ______,                   ______,  KC_MSTP, ______,  ______ \
+      )
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+  return MACRO_NONE;
+};
+
+enum function_id {
+    LED_TOGGLE
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(LED_TOGGLE)
+};
+
+void esc_led_toggle(void) {
+    if (esc_led == 0){
+        esc_led = 1;
+        gh60_esc_led_on();
+    } else {
+        esc_led = 0;
+        gh60_esc_led_off();
+    }
+}
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  switch (id) {
+    case LED_TOGGLE:
+      if (record->event.pressed) {
+        esc_led_toggle();
+      }
+      break;
+  }
+}
\ No newline at end of file
diff --git a/keyboards/gh60/revc/keymaps/dbroqua_7U/rules.mk b/keyboards/gh60/revc/keymaps/dbroqua_7U/rules.mk
new file mode 100644
index 0000000000..21192b1794
--- /dev/null
+++ b/keyboards/gh60/revc/keymaps/dbroqua_7U/rules.mk
@@ -0,0 +1,107 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = yes	    # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES		# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no    # Enable RGB Underglow
+