Remove non-Keychron keyboards

1 files changed, 0 insertions, 111 deletions

diff --git a/keyboards/fjlabs/tf60v2/config.h b/keyboards/fjlabs/tf60v2/config.h
deleted file mode 100644
index 02b2a741d4..0000000000
--- a/keyboards/fjlabs/tf60v2/config.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
-Copyright 2021 <me@fjlaboratories.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-
-// Checked with Eagle Schematic
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6  }
-#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* Define RGB Underglow */
-#define RGB_DI_PIN F7
-#define RGBLED_NUM 64
-#define RGBLIGHT_EFFECT_BREATHING
-#define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#define RGBLIGHT_EFFECT_SNAKE
-#define RGBLIGHT_EFFECT_KNIGHT
-#define RGBLIGHT_EFFECT_CHRISTMAS
-#define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#define RGBLIGHT_EFFECT_RGB_TEST
-#define RGBLIGHT_EFFECT_ALTERNATING
-#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_LIMIT_VAL 108
-#define RGB_VAL_STEP 12
-#define RGBLIGHT_DEFAULT_SPD 144
-#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL
-/* #define RGBLIGHT_LAYER_BLINK*/
-
-/* Define less important options */
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT