Remove non-Keychron keyboards

9 files changed, 0 insertions, 388 deletions

diff --git a/keyboards/fjlabs/tf60ansi/config.h b/keyboards/fjlabs/tf60ansi/config.h
deleted file mode 100644
index 02b2a741d4..0000000000
--- a/keyboards/fjlabs/tf60ansi/config.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
-Copyright 2021 <me@fjlaboratories.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-
-// Checked with Eagle Schematic
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6  }
-#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* Define RGB Underglow */
-#define RGB_DI_PIN F7
-#define RGBLED_NUM 64
-#define RGBLIGHT_EFFECT_BREATHING
-#define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#define RGBLIGHT_EFFECT_SNAKE
-#define RGBLIGHT_EFFECT_KNIGHT
-#define RGBLIGHT_EFFECT_CHRISTMAS
-#define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#define RGBLIGHT_EFFECT_RGB_TEST
-#define RGBLIGHT_EFFECT_ALTERNATING
-#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_LIMIT_VAL 108
-#define RGB_VAL_STEP 12
-#define RGBLIGHT_DEFAULT_SPD 144
-#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL
-/* #define RGBLIGHT_LAYER_BLINK*/
-
-/* Define less important options */
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/fjlabs/tf60ansi/info.json b/keyboards/fjlabs/tf60ansi/info.json
deleted file mode 100644
index 46c386ca5f..0000000000
--- a/keyboards/fjlabs/tf60ansi/info.json
+++ /dev/null
@@ -1,82 +0,0 @@
-{
-    "keyboard_name": "TF60 ANSI",
-    "manufacturer": "FJLabs",
-    "url": "https://www.fjlaboratories.com/",
-    "maintainer": "FJLabs",
-    "usb": {
-        "vid": "0x7074",
-        "pid": "0x1004",
-        "device_version": "0.0.1"
-    },
-    "layouts": {
-        "LAYOUT_60_ansi": {
-            "layout": [
-                {"x": 0, "y": 0},
-                {"x": 1, "y": 0},
-                {"x": 2, "y": 0},
-                {"x": 3, "y": 0},
-                {"x": 4, "y": 0},
-                {"x": 5, "y": 0},
-                {"x": 6, "y": 0},
-                {"x": 7, "y": 0},
-                {"x": 8, "y": 0},
-                {"x": 9, "y": 0},
-                {"x": 10, "y": 0},
-                {"x": 11, "y": 0},
-                {"x": 12, "y": 0},
-                {"x": 13, "y": 0, "w": 2},
-
-                {"x": 0, "y": 1, "w": 1.5},
-                {"x": 1.5, "y": 1},
-                {"x": 2.5, "y": 1},
-                {"x": 3.5, "y": 1},
-                {"x": 4.5, "y": 1},
-                {"x": 5.5, "y": 1},
-                {"x": 6.5, "y": 1},
-                {"x": 7.5, "y": 1},
-                {"x": 8.5, "y": 1},
-                {"x": 9.5, "y": 1},
-                {"x": 10.5, "y": 1},
-                {"x": 11.5, "y": 1},
-                {"x": 12.5, "y": 1},
-                {"x": 13.5, "y": 1, "w": 1.5},
-
-                {"x": 0, "y": 2, "w": 1.75},
-                {"x": 1.75, "y": 2},
-                {"x": 2.75, "y": 2},
-                {"x": 3.75, "y": 2},
-                {"x": 4.75, "y": 2},
-                {"x": 5.75, "y": 2},
-                {"x": 6.75, "y": 2},
-                {"x": 7.75, "y": 2},
-                {"x": 8.75, "y": 2},
-                {"x": 9.75, "y": 2},
-                {"x": 10.75, "y": 2},
-                {"x": 11.75, "y": 2},
-                {"x": 12.75, "y": 2, "w": 2.25},
-
-                {"x": 0, "y": 3, "w": 2.25},
-                {"x": 2.25, "y": 3},
-                {"x": 3.25, "y": 3},
-                {"x": 4.25, "y": 3},
-                {"x": 5.25, "y": 3},
-                {"x": 6.25, "y": 3},
-                {"x": 7.25, "y": 3},
-                {"x": 8.25, "y": 3},
-                {"x": 9.25, "y": 3},
-                {"x": 10.25, "y": 3},
-                {"x": 11.25, "y": 3},
-                {"x": 12.25, "y": 3, "w": 2.75},
-                
-                {"x": 0, "y": 4, "w": 1.25},
-                {"x": 1.25, "y": 4, "w": 1.25},
-                {"x": 2.5, "y": 4, "w": 1.25},
-                {"x": 3.75, "y": 4, "w": 6.25},
-                {"x": 10, "y": 4, "w": 1.25},
-                {"x": 11.25, "y": 4, "w": 1.25},
-                {"x": 12.5, "y": 4, "w": 1.25},
-                {"x": 13.75, "y": 4, "w": 1.25}
-            ]
-        }
-    }
-}
diff --git a/keyboards/fjlabs/tf60ansi/keymaps/default/keymap.c b/keyboards/fjlabs/tf60ansi/keymaps/default/keymap.c
deleted file mode 100644
index 17efef452e..0000000000
--- a/keyboards/fjlabs/tf60ansi/keymaps/default/keymap.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
-Copyright 2021 <me@fjlaboratories.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-enum layers {
-    _LAYER0,
-    _LAYER1,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    [_LAYER0] = LAYOUT_60_ansi(
-        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
-        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
-        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
-        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, 
-        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL
-    ),
-
-    [_LAYER1] = LAYOUT_60_ansi(
-        KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, 
-        KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, QK_BOOT, 
-        KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
-    )
-
-};
\ No newline at end of file
diff --git a/keyboards/fjlabs/tf60ansi/keymaps/via/keymap.c b/keyboards/fjlabs/tf60ansi/keymaps/via/keymap.c
deleted file mode 100644
index d067dacf88..0000000000
--- a/keyboards/fjlabs/tf60ansi/keymaps/via/keymap.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
-Copyright 2021 <me@fjlaboratories.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-enum layers {
-    _LAYER0,
-    _LAYER1,
-    _LAYER2,
-    _LAYER3,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    [_LAYER0] = LAYOUT_60_ansi(
-        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
-        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
-        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
-        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, 
-        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL
-    ),
-
-    [_LAYER1] = LAYOUT_60_ansi(
-        KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, 
-        KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, QK_BOOT, 
-        KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
-    ),
-
-    [_LAYER2] = LAYOUT_60_ansi(
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
-    ),
-
-    [_LAYER3] = LAYOUT_60_ansi(
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
-    ),
-
-};
diff --git a/keyboards/fjlabs/tf60ansi/keymaps/via/rules.mk b/keyboards/fjlabs/tf60ansi/keymaps/via/rules.mk
deleted file mode 100644
index 1e5b99807c..0000000000
--- a/keyboards/fjlabs/tf60ansi/keymaps/via/rules.mk
+++ /dev/null
@@ -1 +0,0 @@
-VIA_ENABLE = yes
diff --git a/keyboards/fjlabs/tf60ansi/readme.md b/keyboards/fjlabs/tf60ansi/readme.md
deleted file mode 100644
index 274db0c27e..0000000000
--- a/keyboards/fjlabs/tf60ansi/readme.md
+++ /dev/null
@@ -1,27 +0,0 @@
-# FJLabs TF60 ANSI 
-
-The following is the QMK Firmware for the FJLabs TF60 ANSI PCB, a universal tray mount 60% hotswap PCB with per key RGB LED's. 
-
-The PCB will feature:
-* Kailh Hotswap sockets
-* QMK & VIA compatibility
-* Per-Key RGB LED's
-
----
-
-* Keyboard Maintainer: FJLabs
-* Hardware Supported: TF60 ANSI
-
-Make example for this keyboard (after setting up your build environment):
-
-    make fjlabs/tf60ansi:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 
-
-## Bootloader
-
-Enter the bootloader in 3 ways:
-
-* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
-* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file
diff --git a/keyboards/fjlabs/tf60ansi/rules.mk b/keyboards/fjlabs/tf60ansi/rules.mk
deleted file mode 100644
index e64258fe9b..0000000000
--- a/keyboards/fjlabs/tf60ansi/rules.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency
-F_CPU = 8000000
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = 60_ansi
diff --git a/keyboards/fjlabs/tf60ansi/tf60ansi.c b/keyboards/fjlabs/tf60ansi/tf60ansi.c
deleted file mode 100644
index da31f8eaff..0000000000
--- a/keyboards/fjlabs/tf60ansi/tf60ansi.c
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
-Copyright 2021 <me@fjlaboratories.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#include "tf60ansi.h"
diff --git a/keyboards/fjlabs/tf60ansi/tf60ansi.h b/keyboards/fjlabs/tf60ansi/tf60ansi.h
deleted file mode 100644
index bafc28891d..0000000000
--- a/keyboards/fjlabs/tf60ansi/tf60ansi.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
-Copyright 2021 <me@fjlaboratories.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "quantum.h"
-
-/* TF60 ANSI Keymap Definitions */
-#define LAYOUT_60_ansi( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,      K3C,      \
-    K40, K41, K42,           K45,                K49, K4A,      K4C, K4D  \
-) { \
-    { K00, K01, K02, K03,   K04,     K05,   K06,   K07,   K08,   K09, K0A, K0B,   K0C,   K0D   }, \
-    { K10, K11, K12, K13,   K14,     K15,   K16,   K17,   K18,   K19, K1A, K1B,   K1C,   K1D   }, \
-    { K20, K21, K22, K23,   K24,     K25,   K26,   K27,   K28,   K29, K2A, K2B,   KC_NO, K2D   }, \
-    { K30, K31, K32, K33,   K34,     K35,   K36,   K37,   K38,   K39, K3A, KC_NO, K3C,   KC_NO }, \
-    { K40, K41, K42, KC_NO, KC_NO,   K45,   KC_NO, KC_NO, KC_NO, K49, K4A, KC_NO, K4C,   K4D   }  \
-}