Remove non-Keychron keyboards

7 files changed, 0 insertions, 212 deletions

diff --git a/keyboards/evyd13/atom47/rev2/.noci b/keyboards/evyd13/atom47/rev2/.noci
deleted file mode 100644
index e69de29bb2..0000000000
--- a/keyboards/evyd13/atom47/rev2/.noci
+++ /dev/null
diff --git a/keyboards/evyd13/atom47/rev2/config.h b/keyboards/evyd13/atom47/rev2/config.h
deleted file mode 100644
index a314395501..0000000000
--- a/keyboards/evyd13/atom47/rev2/config.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
-Copyright 2021 Evelien Dekkers
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 13
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS {B1,B2,B3,B7}
-#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
-
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* Backlight configuration
- */
-#define BACKLIGHT_PIN B6
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 4
-
-#define LED_CAPS_LOCK_PIN F5
-#define LED_PIN_ON_STATE 1
-
-#define RGB_DI_PIN D0    // The pin the LED strip is connected to
-#define RGBLED_NUM 1     // Number of LEDs in your strip
-
-#define QMK_ESC_OUTPUT D7 // usually COL
-#define QMK_ESC_INPUT B7 // usually ROW
-#define QMK_LED B6
diff --git a/keyboards/evyd13/atom47/rev2/info.json b/keyboards/evyd13/atom47/rev2/info.json
deleted file mode 100644
index 6a57c77d64..0000000000
--- a/keyboards/evyd13/atom47/rev2/info.json
+++ /dev/null
@@ -1,67 +0,0 @@
-{
-    "keyboard_name": "Atom47 rev2", 
-    "manufacturer": "Evyd13",
-    "url": "", 
-    "maintainer": "evyd13", 
-    "usb": {
-        "vid": "0x4705",
-        "pid": "0x8E66",
-        "device_version": "0.0.1"
-    },
-    "layouts": {
-        "LAYOUT_split_space": {
-            "layout": [
-                {"x":0, "y":0},
-                {"x":1, "y":0},
-                {"x":2, "y":0},
-                {"x":3, "y":0},
-                {"x":4, "y":0},
-                {"x":5, "y":0},
-                {"x":6, "y":0},
-                {"x":7, "y":0},
-                {"x":8, "y":0},
-                {"x":9, "y":0},
-                {"x":10, "y":0},
-                {"x":11, "y":0},
-                {"x":12, "y":0},
-                
-                {"x":0, "y":1, "w":1.25},
-                {"x":1.25, "y":1},
-                {"x":2.25, "y":1},
-                {"x":3.25, "y":1},
-                {"x":4.25, "y":1},
-                {"x":5.25, "y":1},
-                {"x":6.25, "y":1},
-                {"x":7.25, "y":1},
-                {"x":8.25, "y":1},
-                {"x":9.25, "y":1},
-                {"x":10.25, "y":1},
-                {"x":11.25, "y":1, "w":1.75},
-                
-                {"x":0, "y":2, "w":1.75},
-                {"x":1.75, "y":2},
-                {"x":2.75, "y":2},
-                {"x":3.75, "y":2},
-                {"x":4.75, "y":2},
-                {"x":5.75, "y":2},
-                {"x":6.75, "y":2},
-                {"x":7.75, "y":2},
-                {"x":8.75, "y":2},
-                {"x":9.75, "y":2},
-                {"x":10.75, "y":2, "w":1.25},
-                {"x":12, "y":2},
-                
-                {"x":0, "y":3, "w":1.25},
-                {"x":1.25, "y":3},
-                {"x":2.25, "y":3},
-                {"x":3.25, "y":3},
-                {"x":4.25, "y":3, "w":1.75},
-                {"x":6, "y":3, "w":2.75},
-                {"x":8.75, "y":3},
-                {"x":9.75, "y":3},
-                {"x":10.75, "y":3},
-                {"x":11.75, "y":3, "w":1.25}
-            ]
-        }
-    }
-}
diff --git a/keyboards/evyd13/atom47/rev2/readme.md b/keyboards/evyd13/atom47/rev2/readme.md
deleted file mode 100644
index b63e1bb44c..0000000000
--- a/keyboards/evyd13/atom47/rev2/readme.md
+++ /dev/null
@@ -1,23 +0,0 @@
-# Atom47 rev2
-
-This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it.
-
-## Support
-Keyboard Maintainer: [Matthew Kerfoot](https://github.com/mkerfoot)  
-Hardware Supported: Atom47 rev2  
-Hardware Availability: None  
-
-
-## Features
-- QMK Firmware  
-- In-switch leds  
-- Through-hole micro usb connector (less likely to break off!)  
-- Easily reachable reset button under the spacebar  
-- In-switch CapsLock indicator  
-
-## Build
-To build the default keymap, simply run `make atom47/rev2:default`.
-
-For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`.
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
diff --git a/keyboards/evyd13/atom47/rev2/rev2.c b/keyboards/evyd13/atom47/rev2/rev2.c
deleted file mode 100644
index adb21be368..0000000000
--- a/keyboards/evyd13/atom47/rev2/rev2.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
-Copyright 2021 Evelien Dekkers
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "rev2.h"
diff --git a/keyboards/evyd13/atom47/rev2/rev2.h b/keyboards/evyd13/atom47/rev2/rev2.h
deleted file mode 100644
index 4c4949ad08..0000000000
--- a/keyboards/evyd13/atom47/rev2/rev2.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
-Copyright 2021 Evelien Dekkers
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "quantum.h"
-
-// readability
-#define XXX KC_NO
-
-#define LAYOUT_all LAYOUT_split_space
-
-#define LAYOUT_split_space( \
-  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
-  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
-  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,      k2c, \
-  k30, k31, k32, k33, k34,      k36,      k38, k39, k3a,      k3c \
-) \
-{ \
-  {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
-  {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
-  {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
-  {k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c}  \
-}
-
-void matrix_init_user(void);
-void matrix_scan_user(void);
diff --git a/keyboards/evyd13/atom47/rev2/rules.mk b/keyboards/evyd13/atom47/rev2/rules.mk
deleted file mode 100644
index 104711e420..0000000000
--- a/keyboards/evyd13/atom47/rev2/rules.mk
+++ /dev/null
@@ -1,3 +0,0 @@
-# Build Options
-RGBLIGHT_ENABLE = no
-BACKLIGHT_ENABLE = yes