Merge remote-tracking branch 'upstream/master'

* upstream/master: (1239 commits)
  Update ez.c
  removes planck/rev3 temporarily
  Move hand_swap_config to ez.c, removes error for infinity
  Update Makefile
  ergodox: Update algernon's keymap to v1.9
  Added VS Code dir to .gitignore
  Support the Pegasus Hoof controller.
  [Jack & Erez] Simplifies and documents TO
  add readme
  use wait_ms instead of _delay_ms
  add messenger
  init keymap
  Add example keymap
  Adding whiskey_tango_foxtrot_capslock ergodox keymap
  Unicode map framework. Allow unicode up to 0xFFFFF using separate mapping table
  CIE 1931 dim curve
  Apply the dim curve to the RGB output
  Update the Cluecard readme files
  Tune snake and knight intervals for Cluecard
  Tunable RGB light intervals
  ...

13 files changed, 992 insertions, 0 deletions

diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h
new file mode 100644
index 0000000000..2ea73f1fb3
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h
@@ -0,0 +1,113 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+static const I2CConfig i2ccfg = {
+  400000 // clock speed (Hz); 400kHz max for IS31
+};
+
+#define GDISP_SCREEN_WIDTH  7
+#define GDISP_SCREEN_HEIGHT 7
+
+static const uint8_t led_mask[] = {
+	0xFF, 0x00, /* C1-1 -> C1-16 */
+	0xFF, 0x00, /* C2-1 -> C2-16 */
+	0xFF, 0x00, /* C3-1 -> C3-16 */
+	0xFF, 0x00, /* C4-1 -> C4-16 */
+	0x3F, 0x00, /* C5-1 -> C5-16 */
+	0x00, 0x00, /* C6-1 -> C6-16 */
+	0x00, 0x00, /* C7-1 -> C7-16 */
+	0x00, 0x00, /* C8-1 -> C8-16 */
+	0x00, 0x00, /* C9-1 -> C9-16 */
+};
+
+// The address of the LED
+#define LA(c, r) (c + r * 16 )
+// Need to be an address that is not mapped, but inside the range of the controller matrix
+#define NA LA(8, 8)
+
+// The numbers in the comments are the led numbers DXX on the PCB
+// The mapping is taken from the schematic of left hand side
+static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
+//   45        44        43        42        41        40        39
+   { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
+//   52        51        50        49        48        47        46
+   { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
+//   58        57        56        55        54        53        N/A
+   { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
+//   67        66        65        64        63        62        61
+   { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
+//   76        75        74        73        72        60        59
+   { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
+//   N/A       N/A       N/A       N/A       N/A       N/A       68
+   { NA,       NA,       NA,       NA,       NA,       NA,       LA(5, 4) },
+//   N/A       N/A       N/A       N/A       71        70        69
+   { NA,       NA,       NA,       NA,       LA(6, 2), LA(6, 1), LA(6, 0) },
+};
+
+
+#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_TIMEOUT 5000
+
+static GFXINLINE void init_board(GDisplay *g) {
+    (void) g;
+    /* I2C pins */
+    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
+    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+    palClearPad(GPIOB, 16);
+    /* start I2C */
+    i2cStart(&I2CD1, &i2ccfg);
+    // try high drive (from kiibohd)
+    I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
+    // try glitch fixing (from kiibohd)
+    I2CD1.i2c->FLT = 4;
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
+static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
+    (void) g;
+    return led_mask;
+}
+
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
+{
+    (void) g;
+    return led_mapping[y][x];
+}
+
+static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
+    (void) g;
+    if(!shutdown) {
+        palSetPad(GPIOB, 16);
+    }
+    else {
+        palClearPad(GPIOB, 16);
+    }
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+	(void) g;
+	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk
new file mode 100644
index 0000000000..f32d0d8685
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk
@@ -0,0 +1,2 @@
+GFXINC += drivers/gdisp/IS31FL3731C
+GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
new file mode 100644
index 0000000000..1d21f0c498
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
@@ -0,0 +1,333 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "gfx.h"
+
+#if GFX_USE_GDISP
+
+#define GDISP_DRIVER_VMT			GDISPVMT_IS31FL3731C_ERGODOX
+#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h"
+#include "src/gdisp/gdisp_driver.h"
+
+#include "board_IS31FL3731C.h"
+
+/*===========================================================================*/
+/* Driver local definitions.                                                 */
+/*===========================================================================*/
+
+#ifndef GDISP_SCREEN_HEIGHT
+	#define GDISP_SCREEN_HEIGHT		9
+#endif
+#ifndef GDISP_SCREEN_WIDTH
+	#define GDISP_SCREEN_WIDTH		16
+#endif
+#ifndef GDISP_INITIAL_CONTRAST
+	#define GDISP_INITIAL_CONTRAST	0
+#endif
+#ifndef GDISP_INITIAL_BACKLIGHT
+	#define GDISP_INITIAL_BACKLIGHT	100
+#endif
+
+#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
+
+#define IS31_ADDR_DEFAULT 0x74
+
+#define IS31_REG_CONFIG  0x00
+// bits in reg
+#define IS31_REG_CONFIG_PICTUREMODE 0x00
+#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
+#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
+// D2:D0 bits are starting frame for autoplay mode
+
+#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
+
+#define IS31_REG_AUTOPLAYCTRL1 0x02
+// D6:D4 number of loops (000=infty)
+// D2:D0 number of frames to be used
+
+#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
+
+#define IS31_REG_DISPLAYOPT 0x05
+#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
+#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
+// D2:D0 bits blink period time (*0.27s)
+
+#define IS31_REG_AUDIOSYNC 0x06
+#define IS31_REG_AUDIOSYNC_ENABLE 0x1
+
+#define IS31_REG_FRAMESTATE 0x07
+
+#define IS31_REG_BREATHCTRL1 0x08
+// D6:D4 fade out time (26ms*2^i)
+// D2:D0 fade in time (26ms*2^i)
+
+#define IS31_REG_BREATHCTRL2 0x09
+#define IS31_REG_BREATHCTRL2_ENABLE 0x10
+// D2:D0 extinguish time (3.5ms*2^i)
+
+#define IS31_REG_SHUTDOWN 0x0A
+#define IS31_REG_SHUTDOWN_OFF 0x0
+#define IS31_REG_SHUTDOWN_ON 0x1
+
+#define IS31_REG_AGCCTRL 0x0B
+#define IS31_REG_ADCRATE 0x0C
+
+#define IS31_COMMANDREGISTER 0xFD
+#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+#define IS31_FUNCTIONREG_SIZE 0xD
+
+#define IS31_FRAME_SIZE 0xB4
+
+#define IS31_PWM_REG 0x24
+#define IS31_PWM_SIZE 0x90
+
+#define IS31_LED_MASK_SIZE 0x12
+#define IS31_SCREEN_WIDTH 16
+
+#define IS31
+
+//Generated by http://jared.geek.nz/2013/feb/linear-led-pwm
+const unsigned char cie[256] = {
+    0, 0, 0, 0, 0, 1, 1, 1, 1, 1,
+    1, 1, 1, 1, 2, 2, 2, 2, 2, 2,
+    2, 2, 2, 3, 3, 3, 3, 3, 3, 3,
+    3, 4, 4, 4, 4, 4, 4, 5, 5, 5,
+    5, 5, 6, 6, 6, 6, 6, 7, 7, 7,
+    7, 8, 8, 8, 8, 9, 9, 9, 10, 10,
+    10, 10, 11, 11, 11, 12, 12, 12, 13, 13,
+    13, 14, 14, 15, 15, 15, 16, 16, 17, 17,
+    17, 18, 18, 19, 19, 20, 20, 21, 21, 22,
+    22, 23, 23, 24, 24, 25, 25, 26, 26, 27,
+    28, 28, 29, 29, 30, 31, 31, 32, 32, 33,
+    34, 34, 35, 36, 37, 37, 38, 39, 39, 40,
+    41, 42, 43, 43, 44, 45, 46, 47, 47, 48,
+    49, 50, 51, 52, 53, 54, 54, 55, 56, 57,
+    58, 59, 60, 61, 62, 63, 64, 65, 66, 67,
+    68, 70, 71, 72, 73, 74, 75, 76, 77, 79,
+    80, 81, 82, 83, 85, 86, 87, 88, 90, 91,
+    92, 94, 95, 96, 98, 99, 100, 102, 103, 105,
+    106, 108, 109, 110, 112, 113, 115, 116, 118, 120,
+    121, 123, 124, 126, 128, 129, 131, 132, 134, 136,
+    138, 139, 141, 143, 145, 146, 148, 150, 152, 154,
+    155, 157, 159, 161, 163, 165, 167, 169, 171, 173,
+    175, 177, 179, 181, 183, 185, 187, 189, 191, 193,
+    196, 198, 200, 202, 204, 207, 209, 211, 214, 216,
+    218, 220, 223, 225, 228, 230, 232, 235, 237, 240,
+    242, 245, 247, 250, 252, 255,
+};
+
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+
+typedef struct{
+    uint8_t write_buffer_offset;
+    uint8_t write_buffer[IS31_FRAME_SIZE];
+    uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
+    uint8_t page;
+}__attribute__((__packed__)) PrivData;
+
+// Some common routines and macros
+#define PRIV(g)                         ((PrivData*)g->priv)
+
+/*===========================================================================*/
+/* Driver exported functions.                                                */
+/*===========================================================================*/
+
+static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
+    uint8_t tx[2] __attribute__((aligned(2)));
+    tx[0] = IS31_COMMANDREGISTER;
+    tx[1] = page;
+    write_data(g, tx, 2);
+}
+
+static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
+    uint8_t tx[2] __attribute__((aligned(2)));
+    tx[0] = reg;
+    tx[1] = data;
+    write_page(g, page);
+    write_data(g, tx, 2);
+}
+
+static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
+    PRIV(g)->write_buffer_offset = offset;
+    write_page(g, page);
+    write_data(g, (uint8_t*)PRIV(g), length + 1);
+}
+
+LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
+	// The private area is the display surface.
+	g->priv = gfxAlloc(sizeof(PrivData));
+    __builtin_memset(PRIV(g), 0, sizeof(PrivData));
+	PRIV(g)->page = 0;
+
+	// Initialise the board interface
+	init_board(g);
+	gfxSleepMilliseconds(10);
+
+    // zero function page, all registers (assuming full_page is all zeroes)
+    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
+    set_hardware_shutdown(g, false);
+    gfxSleepMilliseconds(10);
+    // software shutdown
+    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+    gfxSleepMilliseconds(10);
+    // zero function page, all registers
+    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
+    gfxSleepMilliseconds(10);
+
+
+    // zero all LED registers on all 8 pages, and enable the mask
+    __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
+    for(uint8_t i=0; i<8; i++) {
+        write_ram(g, i, 0, IS31_FRAME_SIZE);
+        gfxSleepMilliseconds(1);
+    }
+
+    // software shutdown disable (i.e. turn stuff on)
+    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+    gfxSleepMilliseconds(10);
+
+    // Finish Init
+    post_init_board(g);
+
+	/* Initialise the GDISP structure */
+	g->g.Width = GDISP_SCREEN_WIDTH;
+	g->g.Height = GDISP_SCREEN_HEIGHT;
+	g->g.Orientation = GDISP_ROTATE_0;
+	g->g.Powermode = powerOn;
+	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+	g->g.Contrast = GDISP_INITIAL_CONTRAST;
+	return TRUE;
+}
+
+#if GDISP_HARDWARE_FLUSH
+	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+		// Don't flush if we don't need it.
+		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
+			return;
+
+		PRIV(g)->page++;
+		PRIV(g)->page %= 2;
+		// TODO: some smarter algorithm for this
+		// We should run only one physical page at a time
+		// This way we don't need to send so much data, and
+		// we could use slightly less memory
+		uint8_t* src = PRIV(g)->frame_buffer;
+		for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
+		    for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
+		        PRIV(g)->write_buffer[get_led_address(g, x, y)]=cie[*src];
+		        ++src;
+		    }
+		}
+        write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
+        gfxSleepMilliseconds(1);
+        write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
+
+		g->flags &= ~GDISP_FLG_NEEDFLUSH;
+	}
+#endif
+
+#if GDISP_HARDWARE_DRAWPIXEL
+	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+		coord_t		x, y;
+
+		switch(g->g.Orientation) {
+		default:
+		case GDISP_ROTATE_0:
+			x = g->p.x;
+			y = g->p.y;
+			break;
+		case GDISP_ROTATE_180:
+			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+			y = g->p.y;
+			break;
+		}
+		PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
+		g->flags |= GDISP_FLG_NEEDFLUSH;
+	}
+#endif
+
+#if GDISP_HARDWARE_PIXELREAD
+	LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+		coord_t		x, y;
+
+		switch(g->g.Orientation) {
+		default:
+		case GDISP_ROTATE_0:
+			x = g->p.x;
+			y = g->p.y;
+			break;
+		case GDISP_ROTATE_180:
+			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+			y = g->p.y;
+			break;
+		}
+		return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
+	}
+#endif
+
+#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+	LLDSPEC void gdisp_lld_control(GDisplay *g) {
+		switch(g->p.x) {
+		case GDISP_CONTROL_POWER:
+			if (g->g.Powermode == (powermode_t)g->p.ptr)
+				return;
+			switch((powermode_t)g->p.ptr) {
+			case powerOff:
+			case powerSleep:
+			case powerDeepSleep:
+                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+				break;
+			case powerOn:
+                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+				break;
+			default:
+				return;
+			}
+			g->g.Powermode = (powermode_t)g->p.ptr;
+			return;
+
+		case GDISP_CONTROL_ORIENTATION:
+			if (g->g.Orientation == (orientation_t)g->p.ptr)
+				return;
+			switch((orientation_t)g->p.ptr) {
+			/* Rotation is handled by the drawing routines */
+			case GDISP_ROTATE_0:
+			case GDISP_ROTATE_180:
+				g->g.Height = GDISP_SCREEN_HEIGHT;
+				g->g.Width = GDISP_SCREEN_WIDTH;
+				break;
+			case GDISP_ROTATE_90:
+			case GDISP_ROTATE_270:
+				g->g.Height = GDISP_SCREEN_WIDTH;
+				g->g.Width = GDISP_SCREEN_HEIGHT;
+				break;
+			default:
+				return;
+			}
+			g->g.Orientation = (orientation_t)g->p.ptr;
+			return;
+
+		case GDISP_CONTROL_CONTRAST:
+			return;
+		}
+	}
+#endif // GDISP_NEED_CONTROL
+
+#endif // GFX_USE_GDISP
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h
new file mode 100644
index 0000000000..bb28ad775e
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h
@@ -0,0 +1,36 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_CONFIG_H
+#define _GDISP_LLD_CONFIG_H
+
+#if GFX_USE_GDISP
+
+/*===========================================================================*/
+/* Driver hardware support.                                                  */
+/*===========================================================================*/
+
+#define GDISP_HARDWARE_FLUSH			TRUE		// This controller requires flushing
+#define GDISP_HARDWARE_DRAWPIXEL		TRUE
+#define GDISP_HARDWARE_PIXELREAD		TRUE
+#define GDISP_HARDWARE_CONTROL			TRUE
+
+#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_GRAY256
+
+#endif	/* GFX_USE_GDISP */
+
+#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/emulator_lcd/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/emulator_lcd/driver.mk
new file mode 100644
index 0000000000..16c3f80f53
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/emulator_lcd/driver.mk
@@ -0,0 +1,2 @@
+GFXINC += drivers/gdisp/emulator_lcd
+GFXSRC += drivers/gdisp/emulator_lcd/emulator_lcd.c
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/emulator_lcd/emulator_lcd.c b/keyboards/ergodox/infinity/drivers/gdisp/emulator_lcd/emulator_lcd.c
new file mode 100644
index 0000000000..babfe2b367
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/emulator_lcd/emulator_lcd.c
@@ -0,0 +1,10 @@
+#define GDISP_DRIVER_VMT		    	GDISPVMT_EMULATOR_LCD_ERGODOX
+#define GDISP_HARDWARE_DRAWPIXEL		TRUE
+#define GDISP_HARDWARE_PIXELREAD		TRUE
+#define GDISP_HARDWARE_CONTROL			TRUE
+#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_MONO
+#define GDISP_SCREEN_WIDTH		        128
+#define GDISP_SCREEN_HEIGHT		        32
+#define ROTATE_180_IS_FLIP
+
+#include "emulator/emulator_driver_impl.h"
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/emulator_led/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/emulator_led/driver.mk
new file mode 100644
index 0000000000..2554344321
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/emulator_led/driver.mk
@@ -0,0 +1,2 @@
+GFXINC += drivers/gdisp/emulator_led
+GFXSRC += drivers/gdisp/emulator_led/emulator_led.c
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/emulator_led/emulator_led.c b/keyboards/ergodox/infinity/drivers/gdisp/emulator_led/emulator_led.c
new file mode 100644
index 0000000000..b0ebcdc475
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/emulator_led/emulator_led.c
@@ -0,0 +1,10 @@
+#define GDISP_DRIVER_VMT			    GDISPVMT_EMULATOR_LED_ERGODOX
+#define GDISP_HARDWARE_DRAWPIXEL		TRUE
+#define GDISP_HARDWARE_PIXELREAD		TRUE
+#define GDISP_HARDWARE_CONTROL			TRUE
+#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_MONO
+#define GDISP_SCREEN_WIDTH		        7
+#define GDISP_SCREEN_HEIGHT		        7
+#define ROTATE_180_IS_FLIP
+
+#include "emulator/emulator_driver_impl.h"
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
new file mode 100644
index 0000000000..290571ce5b
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
@@ -0,0 +1,127 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+#include "print.h"
+
+#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_9 // actually 6
+#define ST7565_ADC              ST7565_ADC_NORMAL
+#define ST7565_COM_SCAN         ST7565_COM_SCAN_DEC
+#define ST7565_PAGE_ORDER       0,1,2,3
+/*
+ * Custom page order for several LCD boards, e.g. HEM12864-99
+ * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
+ */
+
+#define ST7565_GPIOPORT GPIOC
+#define ST7565_PORT PORTC
+#define ST7565_A0_PIN 7
+#define ST7565_RST_PIN 8
+#define ST7565_MOSI_PIN 6
+#define ST7565_SLCK_PIN 5
+#define ST7565_SS_PIN 4
+
+#define palSetPadModeRaw(portname, bits) \
+    ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
+
+#define palSetPadModeNamed(portname, portmode) \
+    palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
+
+#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
+// DSPI Clock and Transfer Attributes
+// Frame Size: 8 bits
+// MSB First
+// CLK Low by default
+static const SPIConfig spi1config = {
+	NULL,
+	/* HW dependent part.*/
+	ST7565_GPIOPORT,
+    ST7565_SS_PIN,
+    SPIx_CTARn_FMSZ(7)
+    | SPIx_CTARn_ASC(7)
+    | SPIx_CTARn_DT(7)
+    | SPIx_CTARn_CSSCK(7)
+    | SPIx_CTARn_PBR(0)
+    | SPIx_CTARn_BR(7)
+	//SPI_CR1_BR_0
+};
+
+static bool_t st7565_is_data_mode = 1;
+
+static GFXINLINE void init_board(GDisplay *g) {
+    (void) g;
+    palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+    st7565_is_data_mode = 1;
+    palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
+    palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
+    palSetPadModeRaw(SS, ST7565_SPI_MODE);
+
+    spiInit();
+    spiStart(&SPID1, &spi1config);
+    spiSelect(&SPID1);
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
+    (void) g;
+    if (state) {
+        palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    }
+    else {
+        palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    }
+}
+
+static GFXINLINE void acquire_bus(GDisplay *g) {
+    (void) g;
+    // Only the LCD is using the SPI bus, so no need to acquire
+    // spiAcquireBus(&SPID1);
+}
+
+static GFXINLINE void release_bus(GDisplay *g) {
+    (void) g;
+    // Only the LCD is using the SPI bus, so no need to release
+    //spiReleaseBus(&SPID1);
+}
+
+static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) {
+	(void) g;
+	if (st7565_is_data_mode) {
+	    // The sleeps need to be at lest 10 vs 25 ns respectively
+	    // So let's sleep two ticks, one tick might not be enough
+	    // if we are at the end of the tick
+	    chThdSleep(2);
+        palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+        chThdSleep(2);
+        st7565_is_data_mode = 0;
+	}
+	spiSend(&SPID1, 1, &cmd);
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+	(void) g;
+	if (!st7565_is_data_mode) {
+	    // The sleeps need to be at lest 10 vs 25 ns respectively
+	    // So let's sleep two ticks, one tick might not be enough
+	    // if we are at the end of the tick
+	    chThdSleep(2);
+        palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+	    chThdSleep(2);
+        st7565_is_data_mode = 1;
+	}
+	spiSend(&SPID1, length, data);
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk
new file mode 100644
index 0000000000..889a1a0317
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk
@@ -0,0 +1,2 @@
+GFXINC += drivers/gdisp/st7565ergodox
+GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
new file mode 100644
index 0000000000..c33aea81a8
--- /dev/null
+++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
@@ -0,0 +1,292 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#include "gfx.h"
+
+#if GFX_USE_GDISP
+
+#define GDISP_DRIVER_VMT			GDISPVMT_ST7565_ERGODOX
+#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h"
+#include "src/gdisp/gdisp_driver.h"
+
+#include "board_ST7565.h"
+
+/*===========================================================================*/
+/* Driver local definitions.                                                 */
+/*===========================================================================*/
+
+#ifndef GDISP_SCREEN_HEIGHT
+	#define GDISP_SCREEN_HEIGHT		32
+#endif
+#ifndef GDISP_SCREEN_WIDTH
+	#define GDISP_SCREEN_WIDTH		128
+#endif
+#ifndef GDISP_INITIAL_CONTRAST
+	#define GDISP_INITIAL_CONTRAST	0
+#endif
+#ifndef GDISP_INITIAL_BACKLIGHT
+	#define GDISP_INITIAL_BACKLIGHT	100
+#endif
+
+#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
+
+#include "drivers/gdisp/st7565ergodox/st7565.h"
+
+/*===========================================================================*/
+/* Driver config defaults for backward compatibility.               	     */
+/*===========================================================================*/
+#ifndef ST7565_LCD_BIAS
+  #define ST7565_LCD_BIAS         ST7565_LCD_BIAS_7
+#endif
+#ifndef ST7565_ADC
+  #define ST7565_ADC              ST7565_ADC_NORMAL
+#endif
+#ifndef ST7565_COM_SCAN
+  #define ST7565_COM_SCAN         ST7565_COM_SCAN_INC
+#endif
+#ifndef ST7565_PAGE_ORDER
+  #define ST7565_PAGE_ORDER       0,1,2,3
+#endif
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+
+typedef struct{
+    bool_t buffer2;
+    uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
+}PrivData;
+
+// Some common routines and macros
+#define PRIV(g)                         ((PrivData*)g->priv)
+#define RAM(g)							(PRIV(g)->ram)
+#define write_cmd2(g, cmd1, cmd2)		{ write_cmd(g, cmd1); write_cmd(g, cmd2); }
+#define write_cmd3(g, cmd1, cmd2, cmd3)	{ write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
+
+// Some common routines and macros
+#define delay(us)			gfxSleepMicroseconds(us)
+#define delay_ms(ms)		gfxSleepMilliseconds(ms)
+
+#define xyaddr(x, y)		((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
+#define xybit(y)			(1<<((y)&7))
+
+/*===========================================================================*/
+/* Driver exported functions.                                                */
+/*===========================================================================*/
+
+/*
+ * As this controller can't update on a pixel boundary we need to maintain the
+ * the entire display surface in memory so that we can do the necessary bit
+ * operations. Fortunately it is a small display in monochrome.
+ * 64 * 128 / 8 = 1024 bytes.
+ */
+
+LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
+	// The private area is the display surface.
+	g->priv = gfxAlloc(sizeof(PrivData));
+	PRIV(g)->buffer2 = false;
+
+	// Initialise the board interface
+	init_board(g);
+
+	// Hardware reset
+	setpin_reset(g, TRUE);
+	gfxSleepMilliseconds(20);
+	setpin_reset(g, FALSE);
+	gfxSleepMilliseconds(20);
+
+	acquire_bus(g);
+    write_cmd(g, ST7565_DISPLAY_OFF);
+	write_cmd(g, ST7565_LCD_BIAS);
+    write_cmd(g, ST7565_ADC);
+    write_cmd(g, ST7565_COM_SCAN);
+    
+    write_cmd(g, ST7565_START_LINE | 0);
+
+	write_cmd(g, ST7565_RESISTOR_RATIO | 0x6);
+
+	// turn on voltage converter (VC=1, VR=0, VF=0)
+	write_cmd(g, ST7565_POWER_CONTROL | 0x04);
+	delay_ms(50);
+
+	// turn on voltage regulator (VC=1, VR=1, VF=0)
+	write_cmd(g, ST7565_POWER_CONTROL | 0x06);
+	delay_ms(50);
+
+	// turn on voltage follower (VC=1, VR=1, VF=1)
+	write_cmd(g, ST7565_POWER_CONTROL | 0x07);
+	delay_ms(50);
+
+	write_cmd(g, 0xE2);
+    write_cmd(g, ST7565_COM_SCAN);
+	write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST*64/101);
+	//write_cmd2(g, ST7565_CONTRAST, 0);
+	write_cmd(g, ST7565_DISPLAY_ON);
+	write_cmd(g, ST7565_ALLON_NORMAL);
+	write_cmd(g, ST7565_INVERT_DISPLAY);
+
+	write_cmd(g, ST7565_RMW);
+
+    // Finish Init
+    post_init_board(g);
+
+ 	// Release the bus
+	release_bus(g);
+
+	/* Initialise the GDISP structure */
+	g->g.Width = GDISP_SCREEN_WIDTH;
+	g->g.Height = GDISP_SCREEN_HEIGHT;
+	g->g.Orientation = GDISP_ROTATE_0;
+	g->g.Powermode = powerOn;
+	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+	g->g.Contrast = GDISP_INITIAL_CONTRAST;
+	return TRUE;
+}
+
+#if GDISP_HARDWARE_FLUSH
+	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+		unsigned	p;
+
+		// Don't flush if we don't need it.
+		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
+			return;
+
+		acquire_bus(g);
+		unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
+		for (p = 0; p < 4; p++) {
+			write_cmd(g, ST7565_PAGE | (p + dstOffset));
+			write_cmd(g, ST7565_COLUMN_MSB | 0);
+			write_cmd(g, ST7565_COLUMN_LSB | 0);
+			write_cmd(g, ST7565_RMW);
+			write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
+		}
+		unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
+        write_cmd(g, ST7565_START_LINE | line);
+        PRIV(g)->buffer2 = !PRIV(g)->buffer2;
+		release_bus(g);
+
+		g->flags &= ~GDISP_FLG_NEEDFLUSH;
+	}
+#endif
+
+#if GDISP_HARDWARE_DRAWPIXEL
+	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+		coord_t		x, y;
+
+		switch(g->g.Orientation) {
+		default:
+		case GDISP_ROTATE_0:
+			x = g->p.x;
+			y = g->p.y;
+			break;
+		case GDISP_ROTATE_90:
+			x = g->p.y;
+			y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
+			break;
+		case GDISP_ROTATE_180:
+			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+			y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+			break;
+		case GDISP_ROTATE_270:
+			x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+			y = g->p.x;
+			break;
+		}
+		if (gdispColor2Native(g->p.color) != Black)
+			RAM(g)[xyaddr(x, y)] |= xybit(y);
+		else
+			RAM(g)[xyaddr(x, y)] &= ~xyb