Merge branch 'master' into minidox

5 files changed, 0 insertions, 510 deletions

diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
deleted file mode 100644
index 9650ffb440..0000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_9 // actually 6
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER       0,1,2,3
-/*
- * Custom page order for several LCD boards, e.g. HEM12864-99
- * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
- */
-
-#define ST7565_GPIOPORT GPIOC
-#define ST7565_PORT PORTC
-#define ST7565_A0_PIN 7
-#define ST7565_RST_PIN 8
-#define ST7565_MOSI_PIN 6
-#define ST7565_SLCK_PIN 5
-#define ST7565_SS_PIN 4
-
-#define palSetPadModeRaw(portname, bits) \
-    ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
-
-#define palSetPadModeNamed(portname, portmode) \
-    palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
-
-#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
-// DSPI Clock and Transfer Attributes
-// Frame Size: 8 bits
-// MSB First
-// CLK Low by default
-static const SPIConfig spi1config = {
-   // Operation complete callback or @p NULL.
-  .end_cb = NULL,
-   //The chip select line port - when not using pcs.
-  .ssport = ST7565_GPIOPORT,
-   // brief The chip select line pad number - when not using pcs.
-  .sspad=ST7565_SS_PIN,
-   // SPI initialization data.
-  .tar0 =
-    SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
-    | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
-    | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
-    | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
-    | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
-    | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
-};
-
-static GFXINLINE void acquire_bus(GDisplay *g) {
-    (void) g;
-    // Only the LCD is using the SPI bus, so no need to acquire
-    // spiAcquireBus(&SPID1);
-    spiSelect(&SPID1);
-}
-
-static GFXINLINE void release_bus(GDisplay *g) {
-    (void) g;
-    // Only the LCD is using the SPI bus, so no need to release
-    //spiReleaseBus(&SPID1);
-    spiUnselect(&SPID1);
-}
-
-static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
-    palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-    palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
-    palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
-    palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
-
-    spiInit();
-    spiStart(&SPID1, &spi1config);
-    release_bus(g);
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
-	(void) g;
-}
-
-static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
-    (void) g;
-    if (state) {
-        palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    }
-    else {
-        palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    }
-}
-
-static GFXINLINE void enter_data_mode(GDisplay *g) {
-    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-static GFXINLINE void enter_cmd_mode(GDisplay *g) {
-    palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-	(void) g;
-	spiSend(&SPID1, length, data);
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk
deleted file mode 100644
index 889a1a0317..0000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-GFXINC += drivers/gdisp/st7565ergodox
-GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
deleted file mode 100644
index b04ad02935..0000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT			GDISPVMT_ST7565_ERGODOX
-#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_ST7565.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
-#define GDISP_SCREEN_HEIGHT		32
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-#define GDISP_SCREEN_WIDTH		128
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-#define GDISP_INITIAL_CONTRAST	35
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-#define GDISP_INITIAL_BACKLIGHT	100
-#endif
-
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
-
-#include "drivers/gdisp/st7565ergodox/st7565.h"
-
-/*===========================================================================*/
-/* Driver config defaults for backward compatibility.               	     */
-/*===========================================================================*/
-#ifndef ST7565_LCD_BIAS
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_7
-#endif
-#ifndef ST7565_ADC
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#endif
-#ifndef ST7565_COM_SCAN
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_INC
-#endif
-#ifndef ST7565_PAGE_ORDER
-#define ST7565_PAGE_ORDER       0,1,2,3
-#endif
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-typedef struct{
-    bool_t buffer2;
-    uint8_t data_pos;
-    uint8_t data[16];
-    uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
-}PrivData;
-
-// Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
-#define RAM(g)							(PRIV(g)->ram)
-
-static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
-    PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
-}
-
-static GFXINLINE void flush_cmd(GDisplay* g) {
-    write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
-    PRIV(g)->data_pos = 0;
-}
-
-#define write_cmd2(g, cmd1, cmd2)		{ write_cmd(g, cmd1); write_cmd(g, cmd2); }
-#define write_cmd3(g, cmd1, cmd2, cmd3)	{ write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
-
-// Some common routines and macros
-#define delay(us)			gfxSleepMicroseconds(us)
-#define delay_ms(ms)		gfxSleepMilliseconds(ms)
-
-#define xyaddr(x, y)		((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
-#define xybit(y)			(1<<((y)&7))
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-/*
- * As this controller can't update on a pixel boundary we need to maintain the
- * the entire display surface in memory so that we can do the necessary bit
- * operations. Fortunately it is a small display in monochrome.
- * 64 * 128 / 8 = 1024 bytes.
- */
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
-    // The private area is the display surface.
-    g->priv = gfxAlloc(sizeof(PrivData));
-    PRIV(g)->buffer2 = false;
-    PRIV(g)->data_pos = 0;
-
-    // Initialise the board interface
-    init_board(g);
-
-    // Hardware reset
-    setpin_reset(g, TRUE);
-    gfxSleepMilliseconds(20);
-    setpin_reset(g, FALSE);
-    gfxSleepMilliseconds(20);
-    acquire_bus(g);
-    enter_cmd_mode(g);
-
-    write_cmd(g, ST7565_RESET);
-    write_cmd(g, ST7565_LCD_BIAS);
-    write_cmd(g, ST7565_ADC);
-    write_cmd(g, ST7565_COM_SCAN);
-
-    write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
-    write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST);
-
-    // turn on internal power supply (VC=1, VR=1, VF=1)
-    write_cmd(g, ST7565_POWER_CONTROL | 0x07);
-
-    write_cmd(g, ST7565_INVERT_DISPLAY);
-    write_cmd(g, ST7565_ALLON_NORMAL);
-
-    write_cmd(g, ST7565_START_LINE | 0);
-    write_cmd(g, ST7565_RMW);
-    flush_cmd(g);
-
-    // Finish Init
-    post_init_board(g);
-
-    // Release the bus
-    release_bus(g);
-
-    /* Initialise the GDISP structure */
-    g->g.Width = GDISP_SCREEN_WIDTH;
-    g->g.Height = GDISP_SCREEN_HEIGHT;
-    g->g.Orientation = GDISP_ROTATE_0;
-    g->g.Powermode = powerOff;
-    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-    g->g.Contrast = GDISP_INITIAL_CONTRAST;
-    return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
-LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-    unsigned	p;
-
-    // Don't flush if we don't need it.
-    if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-        return;
-
-    acquire_bus(g);
-    enter_cmd_mode(g);
-    unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
-    for (p = 0; p < 4; p++) {
-        write_cmd(g, ST7565_PAGE | (p + dstOffset));
-        write_cmd(g, ST7565_COLUMN_MSB | 0);
-        write_cmd(g, ST7565_COLUMN_LSB | 0);
-        write_cmd(g, ST7565_RMW);
-        flush_cmd(g);
-        enter_data_mode(g);
-        write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
-        enter_cmd_mode(g);
-    }
-    unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
-    write_cmd(g, ST7565_START_LINE | line);
-    flush_cmd(g);
-    PRIV(g)->buffer2 = !PRIV(g)->buffer2;
-    release_bus(g);
-
-    g->flags &= ~GDISP_FLG_NEEDFLUSH;
-}
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
-LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-    coord_t		x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
-    }
-    if (gdispColor2Native(g->p.color) != Black)
-        RAM(g)[xyaddr(x, y)] |= xybit(y);
-    else
-        RAM(g)[xyaddr(x, y)] &= ~xybit(y);
-    g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
-LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-    coord_t		x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
-    }
-    return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
-}
-#endif
-
-LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
-    uint8_t* buffer = (uint8_t*)g->p.ptr;
-    int linelength = g->p.cx;
-    for (int i = 0; i < g->p.cy; i++) {
-        unsigned dstx = g->p.x;
-        unsigned dsty = g->p.y + i;
-        unsigned srcx = g->p.x1;
-        unsigned srcy = g->p.y1 + i;
-        unsigned srcbit = srcy * g->p.x2 + srcx;
-        for(int j=0; j < linelength; j++) {
-            uint8_t src = buffer[srcbit / 8];
-            uint8_t bit = 7-(srcbit % 8);
-            uint8_t bitset = (src >> bit) & 1;
-            uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]);
-            if (bitset) {
-                *dst |= xybit(dsty);
-            }
-            else {
-                *dst &= ~xybit(dsty);
-            }
-			dstx++;
-            srcbit++;
-        }
-    }
-    g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-LLDSPEC void gdisp_lld_control(GDisplay *g) {
-    switch(g->p.x) {
-    case GDISP_CONTROL_POWER:
-        if (g->g.Powermode == (powermode_t)g->p.ptr)
-            return;
-        switch((powermode_t)g->p.ptr) {
-        case powerOff:
-        case powerSleep:
-        case powerDeepSleep:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_OFF);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        case powerOn:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_ON);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        default:
-            return;
-        }
-        g->g.Powermode = (powermode_t)g->p.ptr;
-        return;
-
-        case GDISP_CONTROL_ORIENTATION:
-            if (g->g.Orientation == (orientation_t)g->p.ptr)
-                return;
-            switch((orientation_t)g->p.ptr) {
-            /* Rotation is handled by the drawing routines */
-            case GDISP_ROTATE_0:
-            case GDISP_ROTATE_180:
-                g->g.Height = GDISP_SCREEN_HEIGHT;
-                g->g.Width = GDISP_SCREEN_WIDTH;
-                break;
-            case GDISP_ROTATE_90:
-            case GDISP_ROTATE_270:
-                g->g.Height = GDISP_SCREEN_WIDTH;
-                g->g.Width = GDISP_SCREEN_HEIGHT;
-                break;
-            default:
-                return;
-            }
-            g->g.Orientation = (orientation_t)g->p.ptr;
-            return;
-
-            case GDISP_CONTROL_CONTRAST:
-                g->g.Contrast = (unsigned)g->p.ptr & 63;
-                acquire_bus(g);
-                enter_cmd_mode(g);
-                write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
-                flush_cmd(g);
-                release_bus(g);
-                return;
-    }
-}
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
deleted file mode 100644
index 2b66a877c8..0000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support.                                                  */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH            TRUE		// This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL        TRUE
-#define GDISP_HARDWARE_PIXELREAD        TRUE
-#define GDISP_HARDWARE_CONTROL          TRUE
-#define GDISP_HARDWARE_BITFILLS         TRUE
-
-#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_MONO
-
-#endif	/* GFX_USE_GDISP */
-
-#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
deleted file mode 100644
index 24924ff050..0000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _ST7565_H
-#define _ST7565_H
-
-#define ST7565_CONTRAST             0x81
-#define ST7565_ALLON_NORMAL         0xA4
-#define ST7565_ALLON                0xA5
-#define ST7565_POSITIVE_DISPLAY     0xA6
-#define ST7565_INVERT_DISPLAY       0xA7
-#define ST7565_DISPLAY_OFF          0xAE
-#define ST7565_DISPLAY_ON           0xAF
-
-#define ST7565_LCD_BIAS_7           0xA3
-#define ST7565_LCD_BIAS_9           0xA2
-
-#define ST7565_ADC_NORMAL           0xA0
-#define ST7565_ADC_REVERSE          0xA1
-
-#define ST7565_COM_SCAN_INC         0xC0
-#define ST7565_COM_SCAN_DEC         0xC8
-
-#define ST7565_START_LINE           0x40
-#define ST7565_PAGE                 0xB0
-#define ST7565_COLUMN_MSB           0x10
-#define ST7565_COLUMN_LSB           0x00
-#define ST7565_RMW                  0xE0
-
-#define ST7565_RESISTOR_RATIO       0x20
-#define ST7565_POWER_CONTROL        0x28
-
-#define ST7565_RESET                0xE2
-
-#endif /* _ST7565_H */