[Keyboard] move standaside into edi/ (#15798)

7 files changed, 316 insertions, 0 deletions

diff --git a/keyboards/edi/standaside/config.h b/keyboards/edi/standaside/config.h
new file mode 100644
index 0000000000..797a463a15
--- /dev/null
+++ b/keyboards/edi/standaside/config.h
@@ -0,0 +1,104 @@
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xF7E0
+#define PRODUCT_ID      0x0412
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    Fate Everywhere
+#define PRODUCT         Stand Aside
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D1, F4, F6, F7, B1, B3, B2, B6 }
+#define MATRIX_COL_PINS { F5, D0, D4, C6, D7, E6, B4, B5 }
+#define UNUSED_PINS {}
+
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN C7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Enable RGB Underlighting
+ */
+#define RGB_DI_PIN C7
+#define RGBLED_NUM 12
+#define RGBLIGHT_ANIMATIONS
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
diff --git a/keyboards/edi/standaside/info.json b/keyboards/edi/standaside/info.json
new file mode 100644
index 0000000000..797a3419b7
--- /dev/null
+++ b/keyboards/edi/standaside/info.json
@@ -0,0 +1,78 @@
+{
+    "keyboard_name": "Stand Aside",
+    "url": "",
+    "maintainer": "fateeverywhere",
+    "layouts": {
+        "LAYOUT_ortho_4x16": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+                {"x":15, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+                {"x":4, "y":1},
+                {"x":5, "y":1},
+                {"x":6, "y":1},
+                {"x":7, "y":1},
+                {"x":8, "y":1},
+                {"x":9, "y":1},
+                {"x":10, "y":1},
+                {"x":11, "y":1},
+                {"x":12, "y":1},
+                {"x":13, "y":1},
+                {"x":14, "y":1},
+                {"x":15, "y":1},
+
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":2},
+                {"x":4, "y":2},
+                {"x":5, "y":2},
+                {"x":6, "y":2},
+                {"x":7, "y":2},
+                {"x":8, "y":2},
+                {"x":9, "y":2},
+                {"x":10, "y":2},
+                {"x":11, "y":2},
+                {"x":12, "y":2},
+                {"x":13, "y":2},
+                {"x":14, "y":2},
+                {"x":15, "y":2},
+
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+                {"x":4, "y":3},
+                {"x":5, "y":3},
+                {"x":6, "y":3},
+                {"x":7, "y":3},
+                {"x":8, "y":3},
+                {"x":9, "y":3},
+                {"x":10, "y":3},
+                {"x":11, "y":3},
+                {"x":12, "y":3},
+                {"x":13, "y":3},
+                {"x":14, "y":3},
+                {"x":15, "y":3}
+            ]
+        }
+    }
+}
diff --git a/keyboards/edi/standaside/keymaps/default/keymap.c b/keyboards/edi/standaside/keymaps/default/keymap.c
new file mode 100644
index 0000000000..0f13cb7632
--- /dev/null
+++ b/keyboards/edi/standaside/keymaps/default/keymap.c
@@ -0,0 +1,77 @@
+
+#include QMK_KEYBOARD_H
+
+#define _MAIN 0
+#define _RAISE 1
+#define _LOWER 2
+
+// Readability keycodes
+#define LOWER   MO(_LOWER)
+#define RAISE   MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+
+/* MAIN
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------.
+ * | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | Backsp | Delete |   7    |   8    |   9    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | ESC    | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      |  PgUp  |   4    |   5    |   6    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | SHIFT  | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | ENTER  |  PgDn  |   1    |   2    |   3    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | LCTRL  |  PAUS  | GUI    | ALT    | Lower  | Space  |  Space | Raise  | Left   | Down   | Up     | Right  |  Shift |   0    |   .    |  ENTER |
+ * '-----------------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_MAIN] = LAYOUT_ortho_4x16(
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, KC_DEL,  KC_KP_7, KC_KP_8,   KC_KP_9,
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_PGUP, KC_KP_4, KC_KP_5,   KC_KP_6,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  KC_PGDN, KC_KP_1, KC_KP_2,   KC_KP_3,
+  KC_LCTL, KC_PAUS, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_RSFT, KC_KP_0, KC_KP_DOT, KC_PENT
+  ),
+
+/* RAISE
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------.
+ * |    `   |  1     |  2     |  3     |  4     |  5     |  6     |  7     |  8     |  9     |  0     |        | Insert |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        |        | -      | =      | [      | ]      |   \    |  Home  |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        |        |        |        |        |        |  PScr  |  End   |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |                 |        |  Next  |  Vol-  |  Vol+  |  Play  | NumLok |        |        |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_RAISE] = LAYOUT_ortho_4x16(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, KC_INS,  _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_END,  _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_NLCK, _______, _______, _______
+  ),
+
+/* LOWER
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------.
+ * |    ~   |    !   |    @   |    #   |    $   |    %   |    ^   |    &   |    *   |    (   |    )   |        |        | RGBPWR |  Mode  | Reset  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |   F1   |   F2   |   F3   |   F4   |   F5   |   F6   |    _   |    +   |    {   |    }   |   |    |        |  HUE+  |  SAT+  |  VAL+  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |   F7   |   F8   |   F9   |  F10   |  F11   |  F12   |        |        |        |        |        |        |  HUE-  |  SAT-  |  VAL-  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |                 |        |        |        |        |  Mute  |        |  Plain | Rainbo | Larsen |
+ * '-----------------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_LOWER] = LAYOUT_ortho_4x16(
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, RGB_TOG, RGB_MOD, RESET,
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, _______, RGB_HUI, RGB_SAI, RGB_VAI,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, RGB_M_P, RGB_M_R, RGB_M_K
+  ),
+
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/edi/standaside/readme.md b/keyboards/edi/standaside/readme.md
new file mode 100644
index 0000000000..51911c877d
--- /dev/null
+++ b/keyboards/edi/standaside/readme.md
@@ -0,0 +1,15 @@
+# Stand Aside
+
+![Stand Aside](https://i.imgur.com/X6Katar.png)
+
+A compact 60% keyboard designed by Fate Everywhere. Born out of the desire for a Planck with a numpad for technical work. Available for sale (kit and completed) once the store comes up.
+
+Keyboard Maintainer: [Fate Everywhere](https://github.com/fateeverywhere)  
+Hardware Supported: Mark 3 Stand Aside.  
+Hardware Availability: Seven Store (https://store.7storm.org).
+
+Make example for this keyboard (after setting up your build environment):
+
+    make edi/standaside:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/edi/standaside/rules.mk b/keyboards/edi/standaside/rules.mk
new file mode 100644
index 0000000000..8e4bcc5f9b
--- /dev/null
+++ b/keyboards/edi/standaside/rules.mk
@@ -0,0 +1,18 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+AUDIO_ENABLE = no           # Audio output
+RGBLIGHT_ENABLE = yes       # Enable RGB underlighting support
diff --git a/keyboards/edi/standaside/standaside.c b/keyboards/edi/standaside/standaside.c
new file mode 100644
index 0000000000..9f445ec044
--- /dev/null
+++ b/keyboards/edi/standaside/standaside.c
@@ -0,0 +1 @@
+#include "standaside.h"
diff --git a/keyboards/edi/standaside/standaside.h b/keyboards/edi/standaside/standaside.h
new file mode 100644
index 0000000000..9601f1257c
--- /dev/null
+++ b/keyboards/edi/standaside/standaside.h
@@ -0,0 +1,23 @@
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define LAYOUT_ortho_4x16( \
+    k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, \
+    k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, \
+    k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k47, k57, \
+    k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k67, k77 \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17 }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27 }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37 }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47 }, \
+    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k60, k61, k62, k63, k64, k65, k66, k67 }, \
+    { k70, k71, k72, k73, k74, k75, k76, k77 } \
+}