Remove non-Keychron keyboards

4 files changed, 0 insertions, 113 deletions

diff --git a/keyboards/dztech/dz60rgb_ansi/v1/.noci b/keyboards/dztech/dz60rgb_ansi/v1/.noci
deleted file mode 100644
index e69de29bb2..0000000000
--- a/keyboards/dztech/dz60rgb_ansi/v1/.noci
+++ /dev/null
diff --git a/keyboards/dztech/dz60rgb_ansi/v1/config.h b/keyboards/dztech/dz60rgb_ansi/v1/config.h
deleted file mode 100644
index 9b31f27f2f..0000000000
--- a/keyboards/dztech/dz60rgb_ansi/v1/config.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#pragma once
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 }
-#define MATRIX_COL_PINS { A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 3
-
-#ifdef RGB_MATRIX_ENABLE
-#    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
-#    define RGB_MATRIX_KEYPRESSES
-#    define RGB_MATRIX_LED_PROCESS_LIMIT 4
-#    define RGB_MATRIX_LED_FLUSH_LIMIT 26
-// RGB Matrix Animation modes. Explicitly enabled
-// For full list of effects, see:
-// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
-#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
-#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
-#    define ENABLE_RGB_MATRIX_BREATHING
-#    define ENABLE_RGB_MATRIX_BAND_SAT
-#    define ENABLE_RGB_MATRIX_BAND_VAL
-#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-#    define ENABLE_RGB_MATRIX_CYCLE_ALL
-#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
-#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
-#    define ENABLE_RGB_MATRIX_DUAL_BEACON
-#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
-#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
-#    define ENABLE_RGB_MATRIX_RAINDROPS
-#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
-#    define ENABLE_RGB_MATRIX_HUE_BREATHING
-#    define ENABLE_RGB_MATRIX_HUE_PENDULUM
-#    define ENABLE_RGB_MATRIX_HUE_WAVE
-#    define ENABLE_RGB_MATRIX_PIXEL_RAIN
-#    define ENABLE_RGB_MATRIX_PIXEL_FLOW
-#    define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
-// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
-#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
-#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
-// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-// #    define ENABLE_RGB_MATRIX_SPLASH
-// #    define ENABLE_RGB_MATRIX_MULTISPLASH
-#    define ENABLE_RGB_MATRIX_SOLID_SPLASH
-// #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
-
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
-#    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_COUNT 1
-#    define DRIVER_LED_TOTAL 61
-#endif
diff --git a/keyboards/dztech/dz60rgb_ansi/v1/info.json b/keyboards/dztech/dz60rgb_ansi/v1/info.json
deleted file mode 100644
index 6fcbd0806f..0000000000
--- a/keyboards/dztech/dz60rgb_ansi/v1/info.json
+++ /dev/null
@@ -1,6 +0,0 @@
-{
-    "usb": {
-        "pid": "0x1220",
-        "device_version": "1.0.0"
-    }
-}
diff --git a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk
deleted file mode 100644
index 22ecf071a7..0000000000
--- a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk
+++ /dev/null
@@ -1,22 +0,0 @@
-# MCU name
-MCU = STM32F303
-BOARD = QMK_PROTON_C
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes          # Mouse keys
-EXTRAKEY_ENABLE = yes          # Audio control and System control
-CONSOLE_ENABLE = no            # Console for debug
-COMMAND_ENABLE = no            # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no          # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no           # Enable keyboard RGB underglow
-AUDIO_ENABLE = no              # Audio output
-RGB_MATRIX_ENABLE = yes        # Use RGB matrix
-RGB_MATRIX_DRIVER = IS31FL3733
-NO_USB_STARTUP_CHECK = no      # Disable initialization only when usb is plugged in