merge upstream master

8 files changed, 8 insertions, 13 deletions

diff --git a/keyboards/ckeys/handwire_101/keymaps/default/keymap.c b/keyboards/ckeys/handwire_101/keymaps/default/keymap.c
index 3bb1a2c009..3f5ebc8655 100755
--- a/keyboards/ckeys/handwire_101/keymaps/default/keymap.c
+++ b/keyboards/ckeys/handwire_101/keymaps/default/keymap.c
@@ -134,10 +134,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `--------=======------------------------'
      */
     [_TERMINAL] = LAYOUT_ortho_4x4(
-        _______,  TERM_ABOUT, _______, _______,
-        TERM_OFF, TERM_PRINT, _______, _______,
-        _______,  TERM_FLUSH, _______, _______,
-        TERM_ON,  TERM_HELP , _______, _______
+        _______, TERM_ABOUT, _______, _______,
+        _______, TERM_PRINT, _______, _______,
+        _______, TERM_FLUSH, _______, _______,
+        _______, TERM_HELP , _______, _______
     ),
     /* ADMIN
      * ,-----------------------------------------.
diff --git a/keyboards/ckeys/handwire_101/readme.md b/keyboards/ckeys/handwire_101/readme.md
index cf20dab60b..281fbddc7c 100755
--- a/keyboards/ckeys/handwire_101/readme.md
+++ b/keyboards/ckeys/handwire_101/readme.md
@@ -139,7 +139,7 @@ This layer is not currently working but has been left as an example of how to wr
 ```
     /* ADMIN
    * ,-----------------------------------------.
-   * |   RESET    |     |           |    X     |
+   * |   QK_BOOT    |     |           |    X     |
    * |------------+-----+-----------+----------|
    * |ABOUT CKEYS |     |           |          |
    * |------------+-----+-----------+----------|
@@ -150,7 +150,7 @@ This layer is not currently working but has been left as an example of how to wr
    */
 ```
 
-The most important key in this layer is the `RESET` switch. Use it to flash new firmware. It does the same thing as the hardware button on the Proton C. But since you soldered the Proton C with the reset button facing towards the keys, the only way to reach it is to de-solder wires. The reset switch solves this. Program a reset switch into all of your future keyboards.
+The most important key in this layer is the `QK_BOOT` switch. Use it to flash new firmware. It does the same thing as the hardware button on the Proton C. But since you soldered the Proton C with the reset button facing towards the keys, the only way to reach it is to de-solder wires. The reset switch solves this. Program a reset switch into all of your future keyboards.
 
 The `ABOUT CKEYS` is another example of using a macro. It will type out a few sentences about cKeys.
 
diff --git a/keyboards/ckeys/handwire_101/rules.mk b/keyboards/ckeys/handwire_101/rules.mk
index 8fa32bcee5..3131bb405a 100755
--- a/keyboards/ckeys/handwire_101/rules.mk
+++ b/keyboards/ckeys/handwire_101/rules.mk
@@ -12,7 +12,6 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
-TERMINAL_ENABLE = yes
 NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
diff --git a/keyboards/ckeys/nakey/config.h b/keyboards/ckeys/nakey/config.h
index cd1296034b..c482a41acd 100644
--- a/keyboards/ckeys/nakey/config.h
+++ b/keyboards/ckeys/nakey/config.h
@@ -35,7 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #define MATRIX_ROW_PINS { F1, F4, F5, F6, F7 }
 #define MATRIX_COL_PINS { B0, B1, B2, B3 }
-#define UNUSED_PINS { D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, B4, B5, B6, B7 }
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/ckeys/obelus/config.h b/keyboards/ckeys/obelus/config.h
index 0ac18c7aa5..07e0ec394d 100644
--- a/keyboards/ckeys/obelus/config.h
+++ b/keyboards/ckeys/obelus/config.h
@@ -35,7 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #define MATRIX_ROW_PINS { F4, F5, F6, F7 }
 #define MATRIX_COL_PINS { F0, F1, B2, B3 }
-#define UNUSED_PINS
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/ckeys/thedora/config.h b/keyboards/ckeys/thedora/config.h
index c14b575678..721e8977d6 100755
--- a/keyboards/ckeys/thedora/config.h
+++ b/keyboards/ckeys/thedora/config.h
@@ -29,7 +29,6 @@
 #define MATRIX_ROW_PINS { A2, A1, A0, B8 }
 #define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0 }
 
-// #define UNUSED_PINS { B14 }
 
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/ckeys/washington/config.h b/keyboards/ckeys/washington/config.h
index 643f61c5d6..8849c4e834 100644
--- a/keyboards/ckeys/washington/config.h
+++ b/keyboards/ckeys/washington/config.h
@@ -33,7 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define MATRIX_ROW_PINS { F4, F5, F6 }
 #define MATRIX_COL_PINS { F7, B1, B3 }
-#define UNUSED_PINS
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/ckeys/washington/keymaps/default/keymap.c b/keyboards/ckeys/washington/keymaps/default/keymap.c
index 95e0f3ab59..9ce0181fe4 100644
--- a/keyboards/ckeys/washington/keymaps/default/keymap.c
+++ b/keyboards/ckeys/washington/keymaps/default/keymap.c
@@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 bool encoder_update_user(uint8_t index, bool clockwise) {
-    switch (biton32(layer_state)) {
+    switch (get_highest_layer(layer_state)) {
         case _BASE:
             if (clockwise) {
                 tap_code(KC_VOLU);
@@ -62,7 +62,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) {
 bool oled_task_user(void) {
   // Host Keyboard Layer Status
   oled_write_P(PSTR("Layer: "), false);
-  switch (biton32(layer_state)) {
+  switch (get_highest_layer(layer_state)) {
     case _BASE:
       oled_write_P(PSTR("Default\n"), false);
       break;