Remove non-Keychron keyboards

8 files changed, 0 insertions, 264 deletions

diff --git a/keyboards/ckeys/nakey/config.h b/keyboards/ckeys/nakey/config.h
deleted file mode 100644
index c482a41acd..0000000000
--- a/keyboards/ckeys/nakey/config.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
-Copyright 2018 James Underwood
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 4
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/ckeys/nakey/info.json b/keyboards/ckeys/nakey/info.json
deleted file mode 100644
index 1f1e67fedf..0000000000
--- a/keyboards/ckeys/nakey/info.json
+++ /dev/null
@@ -1,16 +0,0 @@
-{
-  "keyboard_name": "naKey",
-  "manufacturer": "cKeys",
-  "url": "",
-  "maintainer": "qmk",
-  "usb": {
-    "vid": "0xFEED",
-    "pid": "0x6060",
-    "device_version": "0.0.1"
-  },
-  "layouts": {
-    "LAYOUT_numpad_5x4": {
-      "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}, {"label":"Enter", "x":3, "y":3, "h":2}]
-    }
-  }
-}
diff --git a/keyboards/ckeys/nakey/keymaps/default/keymap.c b/keyboards/ckeys/nakey/keymaps/default/keymap.c
deleted file mode 100644
index c17cd35cb8..0000000000
--- a/keyboards/ckeys/nakey/keymaps/default/keymap.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Copyright 2018 James Underwood
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT_numpad_5x4( /* Base */
-    KC_NLCK,  KC_PSLS,  KC_PAST, KC_PMNS,
-    KC_P7,    KC_P8,    KC_P9,
-    KC_P4,    KC_P5,    KC_P6,   KC_PPLS,
-    KC_P1,    KC_P2,    KC_P3,
-    KC_P0,              KC_PDOT, KC_PENT
-  ),
-};
diff --git a/keyboards/ckeys/nakey/keymaps/default/readme.md b/keyboards/ckeys/nakey/keymaps/default/readme.md
deleted file mode 100644
index c842dc99a7..0000000000
--- a/keyboards/ckeys/nakey/keymaps/default/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for naKey
diff --git a/keyboards/ckeys/nakey/nakey.c b/keyboards/ckeys/nakey/nakey.c
deleted file mode 100644
index 84c0b03ff6..0000000000
--- a/keyboards/ckeys/nakey/nakey.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/* Copyright 2018 James Underwood
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "nakey.h"
diff --git a/keyboards/ckeys/nakey/nakey.h b/keyboards/ckeys/nakey/nakey.h
deleted file mode 100644
index bdb26afa26..0000000000
--- a/keyboards/ckeys/nakey/nakey.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Copyright 2018 James Underwood
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-#define XXX KC_NO
-
-// This a shortcut to help you visually see your layout.
-// The following is an example using the Planck MIT layout
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
-#define LAYOUT_numpad_5x4( \
-    k00, k01, k02, k03, \
-    k10, k11, k12, \
-    k20, k21, k22, k13, \
-    k30, k31, k32, \
-    k40,      k41, k33 \
-) { \
-    { k00, k01, k02, k03 }, \
-    { k10, k11, k12, k13 }, \
-    { k20, k21, k22, XXX }, \
-    { k30, k31, k32, k33 }, \
-    { k40, XXX, k41, XXX } \
-}
diff --git a/keyboards/ckeys/nakey/readme.md b/keyboards/ckeys/nakey/readme.md
deleted file mode 100644
index b85e822abd..0000000000
--- a/keyboards/ckeys/nakey/readme.md
+++ /dev/null
@@ -1,49 +0,0 @@
-# naKey
-
-Firmware for custom keyboard
-
-Keyboard Maintainer: [James Underwood](https://github.com/ju0)  
-Hardware Supported: naKey  
-Hardware Availability: [ckeys.org](https://ckeys.org)
-
-To build this keyboard, follow the [build guide](https://ckeys.org/tutorials/nakey-numpad-build-guide/). 
-
-Make example for this keyboard (after setting up your build environment):
-
-    make ckeys/nakey:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
-
-## Quantum MK Firmware
-
-For the full Quantum feature list, see [the parent readme](/).
-
-## Building
-
-Download or clone the whole firmware and navigate to the root folder. Once your dev env is setup, you'll be able to type `make ckeys/nakey:default` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
-
-(Note: replace naKey with the name of your keyboard.)
-
-Depending on which keymap you would like to use, you will have to compile slightly differently.
-
-### Default
-
-To build with the default keymap, simply run `make ckeys/nakey:default`.
-
-### Other Keymaps
-
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder. Create a `readme.md` and a `keymap.c` file to complete your new keymap. When you are done your file tree should look like this:
-
-* `qmk_firmware/`
-  * `keyboard/`
-    * `keymaps/`
-      * `config.h` (optional)
-      * `keymap.c`
-      * `readme.md`
-      * `rules.mk` (optional)
-
-To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
-
-```
-$ make naKey-[default|jack|<name>]
-```
diff --git a/keyboards/ckeys/nakey/rules.mk b/keyboards/ckeys/nakey/rules.mk
deleted file mode 100644
index fcdb039968..0000000000
--- a/keyboards/ckeys/nakey/rules.mk
+++ /dev/null
@@ -1,19 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = halfkay
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = numpad_5x4