Merge upstream master

2 files changed, 318 insertions, 0 deletions

diff --git a/keyboards/boston_meetup/2019/config.h b/keyboards/boston_meetup/2019/config.h
new file mode 100644
index 0000000000..296e84cf65
--- /dev/null
+++ b/keyboards/boston_meetup/2019/config.h
@@ -0,0 +1,171 @@
+#pragma once
+
+#undef MATRIX_ROWS
+#undef MATRIX_COLS
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+
+#undef MATRIX_ROW_PINS
+#undef MATRIX_COL_PINS
+
+#define MATRIX_ROW_PINS { A3, B8, B9, B1 }
+#define MATRIX_COL_PINS { A7, A8, B2, B10 }
+
+#define ENCODERS_PAD_A { B13 }
+#define ENCODERS_PAD_B { B14 }
+
+//Audio
+#undef AUDIO_VOICES
+#undef AUDIO_PIN
+#define AUDIO_PIN A5
+#define AUDIO_PIN_ALT A4
+#define AUDIO_PIN_ALT_AS_NEGATIVE
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(ONE_UP_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+#define AUDIO_CLICKY
+  /* to enable clicky on startup */
+  //#define AUDIO_CLICKY_ON
+#define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f
+#endif
+
+// configure oled driver for the 128x32 oled
+#define OLED_UPDATE_INTERVAL 33 // ~30fps
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 6
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* Haptic Driver initialization settings
+ * Feedback Control Settings */
+#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
+#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+
+/* default 3V ERM vibration motor voltage and library*/
+#if FB_ERM_LRA == 0
+#define RATED_VOLTAGE 3
+#define V_RMS 2.3
+#define V_PEAK 3.30
+/* Library Selection */
+#define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+
+/* default 2V LRA voltage and library */
+#elif FB_ERM_LRA == 1
+#define RATED_VOLTAGE 2
+#define V_RMS 2.0
+#define V_PEAK 2.85
+#define F_LRA 200
+/* Library Selection */
+#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+
+#endif
+
+/* Control 1 register settings */
+#define DRIVE_TIME 25
+#define AC_COUPLE 0
+#define STARTUP_BOOST 1
+
+/* Control 2 Settings */
+#define BIDIR_INPUT 1
+#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
+#define SAMPLE_TIME 3
+#define BLANKING_TIME 1
+#define IDISS_TIME 1
+
+/* Control 3 settings */
+#define NG_THRESH 2
+#define ERM_OPEN_LOOP 1
+#define SUPPLY_COMP_DIS 0
+#define DATA_FORMAT_RTO 0
+#define LRA_DRIVE_MODE 0
+#define N_PWM_ANALOG 0
+#define LRA_OPEN_LOOP 0
+/* Control 4 settings */
+#define ZC_DET_TIME 0
+#define AUTO_CAL_TIME 3
+
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+
+#define RGBLED_NUM 10
+#define RGB_DI_PIN B5
+#define RGB_MATRIX_LED_COUNT RGBLED_NUM
+
+#define RGB_MATRIX_KEYPRESSES
+
+#define SOLENOID_PIN A14
diff --git a/keyboards/boston_meetup/2019/keymaps/default/keymap.c b/keyboards/boston_meetup/2019/keymaps/default/keymap.c
new file mode 100644
index 0000000000..b4d7280640
--- /dev/null
+++ b/keyboards/boston_meetup/2019/keymaps/default/keymap.c
@@ -0,0 +1,147 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum custom_layers {
+  _BASE,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+enum custom_keycodes {
+  LOWER = SAFE_RANGE,
+  RAISE,
+};
+
+// Custom macros
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define CTL_TTAB    CTL_T(KC_TAB)               // Tap for Esc, hold for Ctrl
+#define CTL_ENT     CTL_T(KC_ENT)               // Tap for Enter, hold for Ctrl
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+// Requires KC_TRNS/_______ for the trigger key in the destination layer
+#define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
+#define LT_RAI(kc)  LT(_RAISE, kc)              // L-ayer T-ap to Raise
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Base
+ * ,------.
+ * | Esc  | 
+ * |------+------+-------------.
+ * |   :  |   7  |   8  |   9  | 
+ * |------+------+------+------|
+ * | RAISE|   4  |   5  |   6  | 
+ * |------+------+------+------|
+ * | LOWER|   1  |   2  |   3  |
+ * `---------------------------'
+ */
+[_BASE] = LAYOUT(
+  KC_ESC,
+  KC_COLN, KC_P7,  KC_P8,  KC_P9,
+  RAISE,   KC_P4,  KC_P5,  KC_P6,
+  LOWER,   KC_P1,  KC_P2,  KC_P3
+),
+
+/* Lower
+ * ,------.
+ * | Nmlk | 
+ * |------+------+-------------.
+ * |  :   |   /  |   *  |   -  | 
+ * |------+------+------+------|
+ * |      |      |   =  |   +  | 
+ * |------+------+------+------|
+ * |      |  0   |   .  |  ENT |
+ * `---------------------------'
+ */
+[_LOWER] = LAYOUT(
+  KC_NUM,
+  KC_COLN,  KC_PSLS, KC_PAST, KC_PMNS,
+  _______,  XXXXXXX, KC_EQL,  KC_PPLS,
+  _______,  KC_P0,   KC_PDOT, KC_PENT
+),
+
+/* Raise
+ * ,------.
+ * | Esc  | 
+ * |------+------+-------------.
+ * |RGB TG|RGB M+|RGB M-|      |
+ * |------+------+------+------|
+ * |      |RGB H+|RGB S+|RGB V+| 
+ * |------+------+------+------|
+ * |  `   |RGB H-|RGB S-|RGB V-|
+ * `---------------------------'
+ */
+[_RAISE] = LAYOUT(
+  KC_NUM,
+  RGB_TOG, RGB_MOD, RGB_RMOD, XXXXXXX,
+  _______, RGB_HUI, RGB_SAI,  RGB_VAI,
+  _______, RGB_HUD, RGB_SAD,  RGB_VAD
+
+),
+
+/* Adjust
+ * ,------.
+ * | DFU  | 
+ * |------+------+-------------.
+ * |HPT TG|HPT FB|HPT RS| BKSP | 
+ * |------+------+------+------|
+ * |      |HPT M+|      |      | 
+ * |------+------+------+------|
+ * |      |HPT M-|Clk TG| Del  |
+ * `---------------------------'
+ */
+[_ADJUST] = LAYOUT(
+  QK_BOOT,
+  HF_TOGG, HF_FDBK, HF_RST,  KC_BSPC,
+  _______, HF_NEXT, XXXXXXX, XXXXXXX,
+  _______, HF_PREV, CK_TOGG, KC_DEL
+),
+
+
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case LOWER:
+      if (record->event.pressed) {
+          //not sure how to have keyboard check mode and set it to a variable, so my work around
+          //uses another variable that would be set to true after the first time a reactive key is pressed.
+        layer_on(_LOWER);
+      } else {
+        layer_off(_LOWER);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        //not sure how to have keyboard check mode and set it to a variable, so my work around
+        //uses another variable that would be set to true after the first time a reactive key is pressed.
+        layer_on(_RAISE);
+      } else {
+        layer_off(_RAISE);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+bool music_mask_user(uint16_t keycode) {
+  switch (keycode) {
+    case RAISE:
+    case LOWER:
+      return false;
+    default:
+      return true;
+  }
+}