Keyboard: bface update (#3702)

* add configurator support

* update bface code to more modern QMK standards

* update readme

* update readme

* Make changes thanks to noroadsleft's PR comments

1 files changed, 33 insertions, 50 deletions

diff --git a/keyboards/bface/README.md b/keyboards/bface/README.md
index f8360aec0c..4120e3bc2d 100644
--- a/keyboards/bface/README.md
+++ b/keyboards/bface/README.md
@@ -1,61 +1,44 @@
-ps2avrGB keyboard firmware
-==========================
+# B.face
 
-This is a port of the QMK firmware for boards that are based on the
-ps2avrGB firmware, like the [ps2avrGB
-keyboard](https://www.keyclack.com/product/gb-ps2avrgb/) or the ones sold
-by [Winkeyless](http://winkeyless.kr/product/ps2avrgb-parts/).
+A 60% keyboard with RGB that runs ps2avrgb natively. Please note that the B.face and B.fake have different switch matrices. Firmware on one, will not work on the other. 
 
-Note that this is a complete replacement for the firmware, so you won't be
-using Bootmapper Client to change any keyboard settings, since not all the
-USB report options are supported.
+Keyboard Maintainer: QMK Community  
+Hardware Supported: B.face PCB   
+Hardware Availability: [Winkeyless](https://winkeyless.kr/product/b-face-x2-pcb/)   
 
-## Supported Boards
+Make example for this keyboard (after setting up your build environment):
 
-Only the [B.mini X2](http://winkeyless.kr/product/b-mini-x2-pcb/) has been
-tested so far (since it's the only one I own). But other boards that use
-the ps2avrGB firmware should work as well.
+    make bface:default
 
-## Installing
+Flashing
 
-First, install the requirements. These commands are for OSX, but all you
-need is the AVR toolchain and `bootloadHID` for flashing:
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
 
-```
-$ brew cask install crosspack-avr
-$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-```
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
 
-In order to use the `./program` script, which can reboot the board into
-the bootloader, you'll need Python 2 with PyUSB installed:
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python
+    brew install pyusb
+    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+    ```
 
-```
-$ pip install pyusb
-```
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
 
-Then, with the keyboard plugged in, simply run this command from the
-`qmk_firmware` directory:
 
-```
-$ make ps2avrGB-program
-```
-
-If you prefer, you can just build it and flash the firmware directly with
-`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it
-in the bootloader:
-
-```
-$ make ps2avrGB
-$ bootloadHID -r ps2avrGB_default.hex
-```
-
-## Troubleshooting
-
-From my experience, it's really hard to brick these boards. But these
-tricks have been useful when it got stuck in a weird scenario.
-
-1. Try plugging the board in while pressing `L_Ctrl`. This will force it
-   to boot only the bootloader without loading the firmware. Once this is
-   done, just reflash the board with the original firmware.
-2. Sometimes USB hubs can act weird, so try connecting the board directly
-   to your computer or plugging/unplugging the USB hub.
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.