[keyboard] bastardkb: restructure folder hierarchy (#16778)

* bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus

Upcoming support for the following (adapter, mcu) pairs will be
submitted in follow-up PRs:

- `v2/elitec`
- `v2/stemcell`
- `blackpill`

This PR contains the following changes:

- Move previous implementation to an inner `v1/elitec` folder
- Move keyboard USB IDs and strings to data driven
- Update headers to update maintainers list
- Run `qmk format-c`

* bastardkb/charybdis: remove broken acceleration implementation

* bastardkb/charybdis: fix debug output

* bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair

* bastardkb: add Blackpill support

* bastardkb/charybdis/3x5: add `bstiq` keymap

* bastardkb/charybdis: add fake LEDs to the configuration

For the Charybdis 3x5 (respectively 4x6), the LED config now simulates
36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to
prevent confusion when testing LEDs during assembly when handedness is
not set correctly.  Those fake LEDs are bound to the physical
bottom-left corner.

* bastardkbk/charybdis/readme.md: update build commands

Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield.

* bastardkb/charybdis: fix Via keymap with blackpill

* bastardkb/charybdis: add 3x6 configuration

* bastardkb/charybdis: remove unnecessary files

* bastardkb/charybdis: remove obsolete code

* bastardkb/charybdis/3x6: add Via keymap

* bastardkb: add support for Splinky (RP2040) board

* bastardkb: initial configuration for the Splinky (SPI not working yet)

* bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball

* bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins

* bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins

* bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball

* bastardkb/charybdis/3x6: add splinky config

* bastardkb/*/v2/splinky: update drivers to `vendor`

* bastardkb/dilemma: add new board

* bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps

* bastardkb/dilemma: add `bstiq` keymap

* bastardkb: specify blackpill boards

* bastardkb/charybdis: fix blackpill-specific define syntax

* bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options

* bastardkb: fix `QK_BOOT` keycodes

* bastardkb/dilemma: fix mouse direction on X axis

* bastardkb/charybdis/3x6: adjust CS

* bastardkb/dilemma: adjust trackpad configuration

* charybdis: fix `PWM33XX_CS_PIN` defines

This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613.

* bastardkb: remove Vial mentions from `bstiq` keymaps

* Cleanup unnecessary comments

Co-authored-by: Nathan <nathan.cooke@compass.com>
Co-authored-by: Charly Delay <0xcharly@codesink.dev>

3 files changed, 82 insertions, 0 deletions

diff --git a/keyboards/bastardkb/scylla/v2/splinky/config.h b/keyboards/bastardkb/scylla/v2/splinky/config.h
new file mode 100644
index 0000000000..5f678fb331
--- /dev/null
+++ b/keyboards/bastardkb/scylla/v2/splinky/config.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP29, GP26, GP5, GP4, GP9 }
+#define MATRIX_COL_PINS \
+    { GP27, GP28, GP15, GP6, GP7, GP8 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define SPLIT_HAND_PIN GP13
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* RGB settings. */
+#define RGB_DI_PIN GP0
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U
diff --git a/keyboards/bastardkb/scylla/v2/splinky/info.json b/keyboards/bastardkb/scylla/v2/splinky/info.json
new file mode 100644
index 0000000000..614e22eefa
--- /dev/null
+++ b/keyboards/bastardkb/scylla/v2/splinky/info.json
@@ -0,0 +1,6 @@
+{
+    "keyboard_name": "Scylla Splinky",
+    "usb": {
+      "device_version": "2.0.0",
+    },
+}
diff --git a/keyboards/bastardkb/scylla/v2/splinky/rules.mk b/keyboards/bastardkb/scylla/v2/splinky/rules.mk
new file mode 100644
index 0000000000..8dfc0256ab
--- /dev/null
+++ b/keyboards/bastardkb/scylla/v2/splinky/rules.mk
@@ -0,0 +1,33 @@
+# MCU name
+MCU = RP2040
+
+# Bootloader selection
+BOOTLOADER = rp2040
+
+# RP2040-specific options
+ALLOW_WARNINGS = yes
+PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+AUDIO_SUPPORTED = no        # Audio is not supported
+RGB_MATRIX_SUPPORTED = yes  # RGB matrix is supported and enabled by default
+RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by default
+RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
+RGB_MATRIX_DRIVER = WS2812
+
+SPLIT_KEYBOARD = yes
+
+SERIAL_DRIVER = vendor
+WS2812_DRIVER = vendor