Remove non-Keychron keyboards

1 files changed, 0 insertions, 113 deletions

diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h
deleted file mode 100644
index d20131e9cf..0000000000
--- a/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/**
- * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#ifdef VIA_ENABLE
-/* VIA configuration. */
-#    define DYNAMIC_KEYMAP_LAYER_COUNT 7
-#endif // VIA_ENABLE
-
-/* Disable unused features. */
-#define NO_ACTION_ONESHOT
-
-#ifndef TAPPING_TERM
-/**
- * \brief Configure the global tapping term (default: 200ms).
- *
- * If you have a lot of accidental mod activations, crank up the tapping term.
- *
- * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
- */
-#    define TAPPING_TERM 200
-#endif // TAPPING_TERM
-
-/**
- * \brief Enable rapid switch from tap to hold.
- *
- * Note that a side-effect of this setting is to disable auto-repeat when
- * pressing key twice, except for one-shot keys.
- *
- * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-force-hold
- */
-#define TAPPING_FORCE_HOLD
-
-/*
- * Tap-or-Hold decision modes.
- *
- * Note that the following flags behave differently when combined (ie. when 2 or
- * more are enabled).
- *
- * See bit.ly/tap-or-hold for a visual explanation of the following tap-or-hold
- * decision modes.
- */
-
-/**
- * \brief Faster tap-hold trigger.
- *
- * Without `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
- *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ ae
- * With `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
- *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ Mod+e
- *
- * See docs.qmk.fm/using-qmk/software-features/tap_hold#permissive-hold
- */
-#define PERMISSIVE_HOLD
-
-/**
- * \brief Prevent normal rollover on alphas from accidentally triggering mods.
- *
- * Ignores key presses that interrupt a mod-tap.  Must-have for Home Row mod.
- *
- * Without `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
- *   Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ Mod+e
- * With `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
- *   Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ ae
- *
- * See docs.qmk.fm/using-qmk/software-features/tap_hold#ignore-mod-tap-interrupt
- */
-#define IGNORE_MOD_TAP_INTERRUPT
-
-/* Charybdis-specific features. */
-
-#ifdef POINTING_DEVICE_ENABLE
-// Automatically enable the pointer layer when moving the trackball.  See also:
-// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS`
-// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD`
-// #define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
-#endif // POINTING_DEVICE_ENABLE
-
-/* RGB Matrix. */
-
-#ifdef RGB_MATRIX_ENABLE
-// Limit maximum brightness to keep power consumption reasonable, and avoid
-// disconnects.
-#    undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
-
-// Rainbow swirl as startup mode.
-#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
-
-// Slow swirl at startup.
-#    define RGB_MATRIX_STARTUP_SPD 32
-
-// Startup values.
-#    define RGB_MATRIX_STARTUP_HUE 0
-#    define RGB_MATRIX_STARTUP_SAT 255
-#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#    define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
-#endif // RGB_MATRIX_ENABLE