Merge upstream master to 2022 Q4 breaking change

1 files changed, 0 insertions, 289 deletions

diff --git a/keyboards/annepro2/annepro2.c b/keyboards/annepro2/annepro2.c
deleted file mode 100644
index f4ced65436..0000000000
--- a/keyboards/annepro2/annepro2.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/* Copyright 2021 OpenAnnePro community
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "hal.h"
-#include "annepro2.h"
-#include "annepro2_ble.h"
-#include "spi_master.h"
-#include "ap2_led.h"
-#include "protocol.h"
-
-#define RAM_MAGIC_LOCATION 0x20001ffc
-#define IAP_MAGIC_VALUE 0x0000fab2
-
-static const SerialConfig led_uart_init_config = {
-    .speed = 115200,
-};
-
-#ifndef LED_UART_BAUD_RATE
-#    define LED_UART_BAUD_RATE 115200
-#endif  // LED_UART_BAUD_RATE
-
-static const SerialConfig led_uart_runtine_config = {
-    .speed = LED_UART_BAUD_RATE,
-};
-
-static const SerialConfig ble_uart_config = {
-    .speed = 115200,
-};
-
-static uint8_t led_mcu_wakeup[11] = {0x7b, 0x10, 0x43, 0x10, 0x03, 0x00, 0x00, 0x7d, 0x02, 0x01, 0x02};
-
-ble_capslock_t ble_capslock = {._dummy = {0}, .caps_lock = false};
-
-#ifdef RGB_MATRIX_ENABLE
-static uint8_t led_enabled = 1;
-#endif
-
-void bootloader_jump(void) {
-    // Send msg to shine to boot into IAP
-    ap2_set_IAP();
-
-    // wait for shine to boot into IAP
-    wait_ms(15);
-
-    // Load ble into IAP
-    annepro2_ble_bootload();
-    wait_ms(15);
-
-    // Magic key to set keyboard to IAP
-    // It’s from reversing original boot loader
-    // If value is that it stays in boot loader aka IAP
-    *((uint32_t *)RAM_MAGIC_LOCATION) = IAP_MAGIC_VALUE;
-
-    // Load the main MCU into IAP
-    __disable_irq();
-    NVIC_SystemReset();
-}
-
-void keyboard_pre_init_kb(void) {
-    // Start LED UART
-    sdStart(&SD0, &led_uart_init_config);
-    /* Let the LED chip settle a bit before switching the mode.
-     * That helped at least one person. */
-    wait_ms(15);
-    sdWrite(&SD0, led_mcu_wakeup, sizeof(led_mcu_wakeup));
-
-    // wait to receive response from wakeup
-    wait_ms(15);
-
-    proto_init(&proto, led_command_callback);
-
-    // loop to clear out receive buffer from shine wakeup
-    while (!sdGetWouldBlock(&SD0)) sdGet(&SD0);
-
-    sdStart(&SD0, &led_uart_runtine_config);
-    keyboard_pre_init_user();
-}
-
-void keyboard_post_init_kb(void) {
-    // Start BLE UART
-    sdStart(&SD1, &ble_uart_config);
-    annepro2_ble_startup();
-
-    // Give the send uart thread some time to
-    // send out the queue before we read back
-    wait_ms(100);
-
-    // loop to clear out receive buffer from ble wakeup
-    while (!sdGetWouldBlock(&SD1)) sdGet(&SD1);
-
-    ap2_led_get_status();
-
-    #ifdef RGB_MATRIX_ENABLE
-    ap2_led_enable();
-    ap2_led_set_manual_control(1);
-    #endif
-
-    keyboard_post_init_user();
-}
-
-void matrix_scan_kb() {
-    // if there's stuff on the ble serial buffer
-    // read it into the capslock struct
-    while (!sdGetWouldBlock(&SD1)) {
-        sdReadTimeout(&SD1, (uint8_t *)&ble_capslock, sizeof(ble_capslock_t), 10);
-    }
-
-    /* While there's data from LED keyboard sent - read it. */
-    while (!sdGetWouldBlock(&SD0)) {
-        uint8_t byte = sdGet(&SD0);
-        proto_consume(&proto, byte);
-    }
-
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    if (record->event.pressed) {
-        if (ap2_led_status.matrix_enabled && ap2_led_status.is_reactive) {
-            ap2_led_forward_keypress(record->event.key.row, record->event.key.col);
-        }
-
-        const ap2_led_t blue = {
-            .p.blue  = 0xff,
-            .p.red   = 0x00,
-            .p.green = 0x00,
-            .p.alpha = 0xff,
-        };
-
-        switch (keycode) {
-            case KC_AP2_BT1:
-                annepro2_ble_broadcast(0);
-                /* FIXME: This hardcodes col/row position */
-                ap2_led_blink(record->event.key.row, record->event.key.col, blue, 8, 50);
-                return false;
-
-            case KC_AP2_BT2:
-                annepro2_ble_broadcast(1);
-                ap2_led_blink(record->event.key.row, record->event.key.col, blue, 8, 50);
-                return false;
-
-            case KC_AP2_BT3:
-                annepro2_ble_broadcast(2);
-                ap2_led_blink(record->event.key.row, record->event.key.col, blue, 8, 50);
-                return false;
-
-            case KC_AP2_BT4:
-                annepro2_ble_broadcast(3);
-                ap2_led_blink(record->event.key.row, record->event.key.col, blue, 8, 50);
-                return false;
-
-            case KC_AP2_USB:
-                annepro2_ble_disconnect();
-                return false;
-
-            case KC_AP2_BT_UNPAIR:
-                annepro2_ble_unpair();
-                return false;
-
-            case KC_AP_LED_OFF:
-                ap2_led_disable();
-                break;
-
-            case KC_AP_LED_ON:
-                if (ap2_led_status.matrix_enabled) {
-                    ap2_led_next_profile();
-                } else {
-                    ap2_led_enable();
-                }
-                ap2_led_reset_foreground_color();
-                break;
-
-            case KC_AP_LED_TOG:
-                if (ap2_led_status.matrix_enabled) {
-                    ap2_led_disable();
-                } else {
-                    ap2_led_enable();
-                    ap2_led_reset_foreground_color();
-                }
-                break;
-
-            case KC_AP_LED_NEXT_PROFILE:
-                ap2_led_next_profile();
-                ap2_led_reset_foreground_color();
-                break;
-
-            case KC_AP_LED_PREV_PROFILE:
-                ap2_led_prev_profile();
-                ap2_led_reset_foreground_color();
-                break;
-
-            case KC_AP_LED_NEXT_INTENSITY:
-                ap2_led_next_intensity();
-                ap2_led_reset_foreground_color();
-                return false;
-
-            case KC_AP_LED_SPEED:
-                ap2_led_next_animation_speed();
-                ap2_led_reset_foreground_color();
-                return false;
-            #ifdef RGB_MATRIX_ENABLE
-            case RGB_TOG:
-                if(rgb_matrix_is_enabled()) ap2_led_disable();
-                else ap2_led_enable();
-                return true;
-
-            case KC_AP_RGB_VAI:
-                if (record->event.pressed) {
-                    if (get_mods() & MOD_MASK_SHIFT) {
-                        rgb_matrix_increase_hue();
-                        return false;
-                    } else if (get_mods() & MOD_MASK_CTRL) {
-                        rgb_matrix_decrease_hue();
-                        return false;
-                    } else {
-                        rgb_matrix_increase_val();
-                    }
-                }
-                return true;
-
-            case KC_AP_RGB_VAD:
-                if (record->event.pressed) {
-                    if (get_mods() & MOD_MASK_SHIFT) {
-                        rgb_matrix_increase_sat();
-                        return false;
-                    } else if (get_mods() & MOD_MASK_CTRL) {
-                        rgb_matrix_decrease_sat();
-                        return false;
-                    } else {
-                        rgb_matrix_decrease_val();
-                    }
-                }
-                return true;
-
-            case KC_AP_RGB_TOG:
-                if (record->event.pressed) {
-                    if (get_mods() & MOD_MASK_SHIFT) {
-                        rgb_matrix_increase_speed();
-                        return false;
-                    } else if (get_mods() & MOD_MASK_CTRL) {
-                        rgb_matrix_decrease_speed();
-                        return false;
-                    } else {
-                        if (led_enabled) {
-                            ap2_led_disable();
-                            rgb_matrix_disable();
-                            led_enabled = 0;
-                        } else {
-                            ap2_led_enable();
-                            rgb_matrix_enable();
-                            led_enabled = 1;
-                        }
-                        return true;
-                    }
-                }
-                return true;
-
-            case KC_AP_RGB_MOD:
-                if (record->event.pressed) {
-                    if (get_mods() & MOD_MASK_CTRL) {
-                        rgb_matrix_step_reverse();
-                        return false;
-                    } else {
-                        rgb_matrix_step();
-                    }
-                }
-                return true;
-            #endif
-
-            default:
-                break;
-        }
-    }
-    return process_record_user(keycode, record);
-}