Merge upstream master

1 files changed, 26 insertions, 0 deletions

diff --git a/keyboards/4pplet/waffling60/readme.md b/keyboards/4pplet/waffling60/readme.md
new file mode 100644
index 0000000000..acfa174eab
--- /dev/null
+++ b/keyboards/4pplet/waffling60/readme.md
@@ -0,0 +1,26 @@
+# waffling60
+
+A 60% PCB for MX switches, one hot swap and one solder-pcb version with decent layout support.
+
+More info: https://geekhack.org/index.php?topic=103531.0
+
+* Keyboard Maintainer: [4pplet](https://github.com/4pplet)
+* Hardware Supported: [waffling60](https://github.com/4pplet/waffling60)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 4pplet/waffling60/rev_a:default
+    make 4pplet/waffling60/rev_b:default
+    make 4pplet/waffling60/rev_c:default
+    
+    make 4pplet/waffling60/rev_d:default
+    make 4pplet/waffling60/rev_d_ansi:default
+    make 4pplet/waffling60/rev_d_iso:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+How to enter bootloader (DFU):
+* Tap the physical reset button or short the reset-header (labled RESET) on tha back of the PCB for keyboard to enter DFU. When in DFU, it's ready to flash the firmware.
+
+Alternative option if the firmware is already pre-flashed:
+* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware.