diff options
| author | Eric Tang <e_l_tang@outlook.com> | 2016-06-12 15:01:55 -0700 |
|---|---|---|
| committer | Jack Humbert <jack.humb@gmail.com> | 2016-06-12 18:01:55 -0400 |
| commit | 6955719075a9a07524814e4183f3f90f83db1c6a (patch) | |
| tree | 4992f68783514c307c327a8fe88fc41d29550a56 /keyboard/planck | |
| parent | 92759be3226c83087959015be097b66d8c7e2f21 (diff) | |
Move LED strip initialization (#397)
Diffstat (limited to 'keyboard/planck')
| -rw-r--r-- | keyboard/planck/planck.c | 16 |
1 files changed, 6 insertions, 10 deletions
diff --git a/keyboard/planck/planck.c b/keyboard/planck/planck.c index da7b3a1702..f1a76266ec 100644 --- a/keyboard/planck/planck.c +++ b/keyboard/planck/planck.c @@ -19,10 +19,6 @@ void matrix_init_kb(void) { backlight_init_ports(); #endif -#ifdef RGBLIGHT_ENABLE - rgblight_init(); -#endif - // Turn status LED on DDRE |= (1<<6); PORTE |= (1<<6); @@ -61,20 +57,20 @@ void backlight_init_ports() // Setup PB7 as output and output low. DDRB |= (1<<7); PORTB &= ~(1<<7); - - // Use full 16-bit resolution. + + // Use full 16-bit resolution. ICR1 = 0xFFFF; // I could write a wall of text here to explain... but TL;DW // Go read the ATmega32u4 datasheet. // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on - + // Pin PB7 = OCR1C (Timer 1, Channel C) // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 // (i.e. start high, go low when counter matches.) // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0 // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1 - + TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; @@ -100,7 +96,7 @@ void backlight_set(uint8_t level) // Set the brightness CHANNEL = 0xFFFF; } - else + else { // Turn on PWM control of PB7 TCCR1A |= _BV(COM1C1); @@ -303,4 +299,4 @@ ISR(TIMER1_COMPA_vect) -#endif
\ No newline at end of file +#endif |