diff options
| author | Erez Zukerman <ezuk@madmimi.com> | 2016-05-24 23:55:29 -0400 |
|---|---|---|
| committer | Erez Zukerman <ezuk@madmimi.com> | 2016-05-24 23:55:29 -0400 |
| commit | d06e940a179b2e81563cf6123461cfcad35f9045 (patch) | |
| tree | 58f4bbc22f51cba0c22a6a1ab09a499681f1f89e /keyboard/onekey/Makefile.vusb | |
| parent | 8bc69afc633d3e199e3ac0a5bf39e4d255f2ce4a (diff) | |
[Erez & Jack] Removes keyboards which are not active on qmk
Diffstat (limited to 'keyboard/onekey/Makefile.vusb')
| -rw-r--r-- | keyboard/onekey/Makefile.vusb | 88 |
1 files changed, 0 insertions, 88 deletions
diff --git a/keyboard/onekey/Makefile.vusb b/keyboard/onekey/Makefile.vusb deleted file mode 100644 index fb1fbdfea2..0000000000 --- a/keyboard/onekey/Makefile.vusb +++ /dev/null @@ -1,88 +0,0 @@ -# Target file name (without extension). -TARGET = onekey_vusb - -# Directory common source filess exist -TMK_DIR = ../../tmk_core - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# keyboard dependent files -SRC = keymap.c \ - matrix.c \ - led.c - -CONFIG_H = config.h - - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = atmega168p -MCU = atmega328p - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 12000000 - - -# Build Options -# comment out to disable the options. -# -#MOUSEKEY_ENABLE = yes # Mouse keys -#EXTRAKEY_ENABLE = yes # Audio control and System control -#NKRO_ENABLE = yes # USB Nkey Rollover - - - -#---------------- Programming Options -------------------------- -AVRDUDE = avrdude -# Type: avrdude -c ? to get a full listing. -AVRDUDE_PROGRAMMER = usbasp -AVRDUDE_PORT = -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep - -# Uncomment the following if you want avrdude's erase cycle counter. -# Note that this counter needs to be initialized first using -Yn, -# see avrdude manual. -#AVRDUDE_ERASE_COUNTER = -y - -# Uncomment the following if you do /not/ wish a verification to be -# performed after programming the device. -#AVRDUDE_NO_VERIFY = -V - -# Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> -# to submit bug reports. -#AVRDUDE_VERBOSE = -v -v - -#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) -AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) -AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) - -PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) - - -# Boot Section Size in bytes -# Teensy halfKay 512 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBasp 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 - - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TMK_DIR) - - -include $(TMK_DIR)/protocol.mk -include $(TMK_DIR)/common.mk -include $(TMK_DIR)/protocol/vusb.mk -include $(TMK_DIR)/rules.mk |