subtree docs

1 files changed, 151 insertions, 0 deletions

diff --git a/docs/FAQ-Build.md b/docs/FAQ-Build.md
new file mode 100644
index 0000000000..75babb6bad
--- /dev/null
+++ b/docs/FAQ-Build.md
@@ -0,0 +1,151 @@
+## READ FIRST
+- https://github.com/jackhumbert/qmk_firmware/blob/master/doc/BUILD_GUIDE.md
+
+In short,
+
+    $ make [-f Makefile.<variant>] [KEYMAP=...] clean
+    $ make [-f Makefile.<variant>] [KEYMAP=...]
+    $ make [-f Makefile.<variant>] [KEYMAP=...] dfu
+
+
+## Can't program on Linux and Mac
+You will need proper permission to operate a device. For Linux users see udev rules below.
+Easy way is to use `sudo` command, if you are not familiar with this command check its manual with `man sudo` or this page on line.
+
+https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/man8/sudo.8.html
+
+In short when your controller is ATMega32u4,
+    
+    $ sudo dfu-programmer atmega32u4 erase --force
+    $ sudo dfu-programmer atmega32u4 flash your.hex
+    $ sudo dfu-programmer atmega32u4 reset
+
+or just
+
+    $ sudo make dfu
+
+But to run `make` with root privilege is not good idea. Use former method as possible.
+
+## Do 'make clean' before 'make'
+You'll need `make clean` after you edit **config.h** or change options like `KEYMAP`.
+
+Frist remove all files made in previous build,
+
+    $ make clean
+
+then build new firmware. 
+
+    $ make [KEYMAP=...]
+
+Also you can always try `make clean` when you get other strange result during build.
+
+
+## WINAVR is obsolete
+It is no longer recommended and may cause some problem.
+See [Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
+
+## USB stack: LUFA or PJRC?
+Use **LUFA**.
+
+**PJRC** stack won't be supported actively anymore. There is no reason to hesitate to use LUFA except for binary size(about 1KB lager?). But **PJRC** is still very useful for debug and development purpose.
+See also [Issue #50](https://github.com/tmk/tmk_keyboard/issues/50) and [Issue #58](https://github.com/tmk/tmk_keyboard/issues/58).
+
+## Edit configuration but not change
+You will need followings after editing `CONSOLE_ENABLE`, `NKRO_ENABLE`, `EXTRAKEY_ENABLE` or `MOUSEKEY_ENABLE` option in **Makefile**.
+
+### 1. make clean
+This will be needed when you edit **config.h**.
+
+### 2. Remove Drivers from Device Manager(Windows)
+**Windows only.** Linux, OSX and other OS's doesn't require this. It looks like Windows keeps using driver installed when device was connected first time even after the device changes its configuration. To load proper drivers for new configuration you need to remove existent drivers from **Drvice Manager**.
+
+### 3. Build with different VID:PID
+**Windows only.** If method 2. does't work fou you try this. Change Vendor ID or Product ID in **config.h** and build firmware. Windows should recognize it as whole new device and start drivers install process.
+
+### 4. Just try other ports
+This will be useful and the easiest workaround for **Windows**.
+
+
+
+## USB VID and PID
+You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very least chance of collision with other product.
+
+For example TMK uses following numbers by default.
+```
+keyboard:
+hhkb: FEED:CAFE
+gh60: FEED:6060
+
+converter:
+x68k: FEED:6800
+ps2: FEED:6512
+adb: FEED:0ADB
+ibm4704: FEED:4704
+pc98: FEED:9898
+```
+
+Also see this.
+https://github.com/tmk/tmk_keyboard/issues/150
+
+You can buy a really unique VID:PID here. I don't think you need this for personal use.
+- http://www.obdev.at/products/vusb/license.html
+- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
+
+
+## Linux udev rules
+On Linux you need proper privilege to access device file of MCU, you'll have to use `sudo` when flashing firmware. You can circumvent this with placing these files in `/etc/udev/rules.d/`.
+
+**/etc/udev/rules.d/50-atmel-dfu.rules:**
+```
+# Atmel ATMega32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", MODE:="0666"
+# Atmel USBKEY AT90USB1287
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", MODE:="0666"
+# Atmel ATMega32U2
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="0666"
+```
+
+**/etc/udev/rules.d/52-tmk-keyboard.rules:**
+```
+# tmk keyboard products     https://github.com/tmk/tmk_keyboard
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
+```
+
+
+
+## Cortex: cstddef: No such file or directory
+GCC 4.8 of Ubuntu 14.04 had this problem and had to update to 4.9 with this PPA.
+https://launchpad.net/~terry.guo/+archive/ubuntu/gcc-arm-embedded
+
+https://github.com/tmk/tmk_keyboard/issues/212
+https://github.com/tmk/tmk_keyboard/wiki/mbed-cortex-porting#compile-error-cstddef
+https://developer.mbed.org/forum/mbed/topic/5205/
+
+
+## 'clock_prescale_set' and 'clock_div_1' not available
+Your toolchain is too old to support the MCU. For example WinAVR 20100110 doesn't support ATMega32u2.
+
+```
+Compiling C: ../../tmk_core/protocol/lufa/lufa.c
+avr-gcc -c -mmcu=atmega32u2 -gdwarf-2 -DF_CPU=16000000UL -DINTERRUPT_CONTROL_ENDPOINT -DBOOTLOADER_SIZE=4096 -DF_USB=16000000UL -DARCH=ARCH_AVR8 -DUSB_DEVICE_ONLY -DUSE_FLASH_DESCRIPTORS -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -DFIXED_CONTROL_ENDPOINT_SIZE=8  -DFIXED_NUM_CONFIGURATIONS=1 -DPROTOCOL_LUFA -DEXTRAKEY_ENABLE -DCONSOLE_ENABLE -DCOMMAND_ENABLE -DVERSION=unknown -Os -funsigned-char -funsigned-bitfields -ffunction-sections -fdata-sections -fno-inline-small-functions -fpack-struct -fshort-enums -fno-strict-aliasing -Wall -Wstrict-prototypes -Wa,-adhlns=obj_alps64/protocol/lufa/lufa.lst -I. -I../../tmk_core -I../../tmk_core/protocol/lufa -I../../tmk_core/protocol/lufa/LUFA-git -I../../tmk_core/common -std=gnu99 -include config.h -MMD -MP -MF .dep/obj_alps64_protocol_lufa_lufa.o.d  ../../tmk_core/protocol/lufa/lufa.c -o obj_alps64/protocol/lufa/lufa.o
+../../tmk_core/protocol/lufa/lufa.c: In function 'setup_mcu':
+../../tmk_core/protocol/lufa/lufa.c:575: warning: implicit declaration of function 'clock_prescale_set'
+../../tmk_core/protocol/lufa/lufa.c:575: error: 'clock_div_1' undeclared (first use in this function)
+../../tmk_core/protocol/lufa/lufa.c:575: error: (Each undeclared identifier is reported only once
+../../tmk_core/protocol/lufa/lufa.c:575: error: for each function it appears in.)
+make: *** [obj_alps64/protocol/lufa/lufa.o] Error 1
+```
+
+
+## BOOTLOADER_SIZE for AVR
+Note that Teensy2.0++ bootloader size is 2048byte. Some Makefiles may have wrong comment.
+
+```
+# Boot Section Size in *bytes*    
+#   Teensy halfKay   512          
+#   Teensy++ halfKay 2048         
+#   Atmel DFU loader 4096       (TMK Alt Controller)
+#   LUFA bootloader  4096         
+#   USBaspLoader     2048         
+OPT_DEFS += -DBOOTLOADER_SIZE=2048
+```
\ No newline at end of file