cleans up folder structure

* consolidates docs
* deletes converter/
* updates .md references (most)

1 files changed, 0 insertions, 190 deletions

diff --git a/converter/next_usb/config.h b/converter/next_usb/config.h
deleted file mode 100644
index a06affc5e8..0000000000
--- a/converter/next_usb/config.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
-NeXT non-ADB Keyboard USB Converter
- 
-Copyright 2013, Benjamin Gould (bgould@github.com)
-
-Based on:
-TMK firmware code Copyright 2011,2012 Jun WAKO <wakojun@gmail.com>
-Arduino code by "Ladyada" Limor Fried (http://ladyada.net/, http://adafruit.com/), released under BSD license
-
-Timing reference thanks to http://m0115.web.fc2.com/ (dead link), http://cfile7.uf.tistory.com/image/14448E464F410BF22380BB
-Pinouts thanks to http://www.68k.org/~degs/nextkeyboard.html
-Keycodes from http://ftp.netbsd.org/pub/NetBSD/NetBSD-release-6/src/sys/arch/next68k/dev/
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
-  notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
-  notice, this list of conditions and the following disclaimer in
-  the documentation and/or other materials provided with the
-  distribution.
-
-* Neither the name of the copyright holders nor the names of
-  contributors may be used to endorse or promote products derived
-  from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0xBCBC
-#define DEVICE_VER      0x0500
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         NeXT Keyboard to USB converter
-#define DESCRIPTION     USB converter for NeXT non-ADB Keyboard
-
-/* matrix size */
-#define MATRIX_ROWS 12  // keycode bit: 3-0
-#define MATRIX_COLS  8  // keycode bit: 6-4
-
-#define DEBUG_ON_INIT 1
-
-//#define TEENSY_CONFIG 1
-//#define PRO_MICRO_CONFIG 1
-#define TMK_CONFIG 1
-
-// comment out if you don't want the keyboard's LEDs to flash upon initialization or pressing shift
-//#define NEXT_KBD_INIT_FLASH_LEDS
-//#define NEXT_KBD_SHIFT_FLASH_LEDS
-
-//============= Start of Arduino Pro Micro Configuration ==============
-#ifdef PRO_MICRO_CONFIG
-
-// this is the debugging LED that flashes when a key is being pressed
-// comment out in order to disable debugging LED
-#define NEXT_KBD_LED1_PORT  PORTD
-#define NEXT_KBD_LED1_PIN   PIND
-#define NEXT_KBD_LED1_DDR   DDRD
-#define NEXT_KBD_LED1_BIT   5
-
-#define NEXT_KBD_LED1_ON    NEXT_KBD_LED1_PORT &= ~(1<<NEXT_KBD_LED1_BIT);
-#define NEXT_KBD_LED1_OFF   NEXT_KBD_LED1_PORT |=  (1<<NEXT_KBD_LED1_BIT);
-
-// reserved for future use
-#define NEXT_KBD_LED2_PORT  PORTB
-#define NEXT_KBD_LED2_PIN   PINB
-#define NEXT_KBD_LED2_DDR   DDRB
-#define NEXT_KBD_LED2_BIT   6
-
-#define NEXT_KBD_LED2_ON    NEXT_KBD_LED2_PORT &= ~(1<<NEXT_KBD_LED2_BIT);
-#define NEXT_KBD_LED2_OFF   NEXT_KBD_LED2_PORT |=  (1<<NEXT_KBD_LED2_BIT);
-
-// corresponds to the Keyboard In wire on the NeXT connector
-// (red wire in NeXT connector) - pin 2 on the Pro Micro
-#define NEXT_KBD_OUT_PORT  PORTD
-#define NEXT_KBD_OUT_PIN   PIND
-#define NEXT_KBD_OUT_DDR   DDRD
-#define NEXT_KBD_OUT_BIT   1
-
-// corresponds to the Keyboard Out wire on the NeXT connector
-// (orange wire in NeXT connector) - pin 3 on the Pro Micro
-#define NEXT_KBD_IN_PORT   PORTD
-#define NEXT_KBD_IN_PIN    PIND
-#define NEXT_KBD_IN_DDR    DDRD
-#define NEXT_KBD_IN_BIT    0
-
-// this pin is an input for the power key on the NeXT keyboard
-// as the keyboard is powered on this should be normally high;
-// if it is pulled low it means the power button is being preseed
-// (yellow wire in NeXT connector) - pin 4 on the Pro Micro
-#define NEXT_KBD_PWR_PORT  PORTD
-#define NEXT_KBD_PWR_PIN   PIND
-#define NEXT_KBD_PWR_DDR   DDRD
-#define NEXT_KBD_PWR_BIT   4
-
-#endif
-//============== End of Arduino Pro Micro Configuration ===============
-
-
-//================ Start of Teensy 2.0 Configuration =================
-#ifdef TEENSY_CONFIG
-
-// this is the debugging LED that flashes when a key is being pressed
-// comment out in order to disable debugging LED
-#define NEXT_KBD_LED_PORT  PORTD
-#define NEXT_KBD_LED_PIN   PIND
-#define NEXT_KBD_LED_DDR   DDRD
-#define NEXT_KBD_LED_BIT   6
-
-#define NEXT_KBD_LED_ON  NEXT_KBD_LED_PORT |=  (1<<NEXT_KBD_LED_BIT);
-#define NEXT_KBD_LED_OFF NEXT_KBD_LED_PORT &= ~(1<<NEXT_KBD_LED_BIT);
-
-// corresponds to the Keyboard In wire on the NeXT connector
-// (red wire in NeXT connector)
-#define NEXT_KBD_OUT_PORT  PORTB
-#define NEXT_KBD_OUT_PIN   PINB
-#define NEXT_KBD_OUT_DDR   DDRB
-#define NEXT_KBD_OUT_BIT   1
-
-// corresponds to the Keyboard Out wire on the NeXT connector
-// (orange wire in NeXT connector)
-#define NEXT_KBD_IN_PORT   PORTB
-#define NEXT_KBD_IN_PIN    PINB
-#define NEXT_KBD_IN_DDR    DDRB
-#define NEXT_KBD_IN_BIT    0
-
-#endif
-//================= End of Teensy 2.0 Configuration ==================
-
-
-//================ Start of TMK converter Configuration =================
-#ifdef TMK_CONFIG
-
-// this is the debugging LED that flashes when a key is being pressed
-// comment out in order to disable debugging LED
-#define NEXT_KBD_LED1_PORT  PORTD
-#define NEXT_KBD_LED1_PIN   PIND
-#define NEXT_KBD_LED1_DDR   DDRD
-#define NEXT_KBD_LED1_BIT   6
-
-#define NEXT_KBD_LED1_ON    NEXT_KBD_LED1_PORT |=  (1<<NEXT_KBD_LED1_BIT);
-#define NEXT_KBD_LED1_OFF   NEXT_KBD_LED1_PORT &= ~(1<<NEXT_KBD_LED1_BIT);
-
-// corresponds to the Keyboard In wire on the NeXT connector
-#define NEXT_KBD_OUT_PORT  PORTD
-#define NEXT_KBD_OUT_PIN   PIND
-#define NEXT_KBD_OUT_DDR   DDRD
-#define NEXT_KBD_OUT_BIT   1
-
-// corresponds to the Keyboard Out wire on the NeXT connector
-#define NEXT_KBD_IN_PORT   PORTD
-#define NEXT_KBD_IN_PIN    PIND
-#define NEXT_KBD_IN_DDR    DDRD
-#define NEXT_KBD_IN_BIT    0
-
-// this pin is an input for the power key on the NeXT keyboard
-// as the keyboard is powered on this should be normally high;
-// if it is pulled low it means the power button is being preseed
-#define NEXT_KBD_PWR_PORT  PORTD
-#define NEXT_KBD_PWR_PIN   PIND
-#define NEXT_KBD_PWR_DDR   DDRD
-#define NEXT_KBD_PWR_BIT   4
-
-#endif
-//================= End of TMK converter Configuration ==================
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \
-    (keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RALT))) || \
-    (keyboard_report->mods == (MOD_BIT(KC_RGUI) | MOD_BIT(KC_RGUI)))  \
-)