diff options
author | Joel Challis <git@zvecr.com> | 2021-11-01 19:18:33 +0000 |
---|---|---|
committer | GitHub <noreply@github.com> | 2021-11-01 19:18:33 +0000 |
commit | 92385e30cdad61ddfc0461b1ce1340bcb494a68a (patch) | |
tree | d472f93ed9f4e42e4972630d8178a387b91a51bc | |
parent | ee371c1295f00c119dd5a1bb2f3d4acedff832a7 (diff) |
Manually format develop (#15003)
30 files changed, 597 insertions, 525 deletions
diff --git a/drivers/sensors/adns5050.c b/drivers/sensors/adns5050.c index e7273977d5..254ef2ee87 100644 --- a/drivers/sensors/adns5050.c +++ b/drivers/sensors/adns5050.c @@ -17,7 +17,6 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ - #include "adns5050.h" #include "wait.h" #include "debug.h" @@ -61,13 +60,9 @@ void adns_sync(void) { writePinHigh(ADNS_CS_PIN); } -void adns_cs_select(void) { - writePinLow(ADNS_CS_PIN); -} +void adns_cs_select(void) { writePinLow(ADNS_CS_PIN); } -void adns_cs_deselect(void) { - writePinHigh(ADNS_CS_PIN); -} +void adns_cs_deselect(void) { writePinHigh(ADNS_CS_PIN); } uint8_t adns_serial_read(void) { setPinInput(ADNS_SDIO_PIN); @@ -121,7 +116,7 @@ uint8_t adns_read_reg(uint8_t reg_addr) { // We don't need a minimum tSRAD here. That's because a 4ms wait time is // already included in adns_serial_write(), so we're good. // See page 10 and 15 of the ADNS spec sheet. - //wait_us(4); + // wait_us(4); uint8_t byte = adns_serial_read(); @@ -138,7 +133,7 @@ uint8_t adns_read_reg(uint8_t reg_addr) { void adns_write_reg(uint8_t reg_addr, uint8_t data) { adns_cs_select(); - adns_serial_write( 0b10000000 | reg_addr ); + adns_serial_write(0b10000000 | reg_addr); adns_serial_write(data); adns_cs_deselect(); } @@ -155,7 +150,7 @@ report_adns_t adns_read_burst(void) { // We don't need a minimum tSRAD here. That's because a 4ms wait time is // already included in adns_serial_write(), so we're good. // See page 10 and 15 of the ADNS spec sheet. - //wait_us(4); + // wait_us(4); uint8_t x = adns_serial_read(); uint8_t y = adns_serial_read(); @@ -180,13 +175,11 @@ int8_t convert_twoscomp(uint8_t data) { } // Don't forget to use the definitions for CPI in the header file. -void adns_set_cpi(uint8_t cpi) { - adns_write_reg(REG_MOUSE_CONTROL2, cpi); -} +void adns_set_cpi(uint8_t cpi) { adns_write_reg(REG_MOUSE_CONTROL2, cpi); } bool adns_check_signature(void) { - uint8_t pid = adns_read_reg(REG_PRODUCT_ID); - uint8_t rid = adns_read_reg(REG_REVISION_ID); + uint8_t pid = adns_read_reg(REG_PRODUCT_ID); + uint8_t rid = adns_read_reg(REG_REVISION_ID); uint8_t pid2 = adns_read_reg(REG_PRODUCT_ID2); return (pid == 0x12 && rid == 0x01 && pid2 == 0x26); diff --git a/drivers/sensors/adns5050.h b/drivers/sensors/adns5050.h index ff8e8f78e9..5e9edc2962 100644 --- a/drivers/sensors/adns5050.h +++ b/drivers/sensors/adns5050.h @@ -67,13 +67,13 @@ typedef struct { // A bunch of functions to implement the ADNS5050-specific serial protocol. // Note that the "serial.h" driver is insufficient, because it does not // manually manipulate a serial clock signal. -void adns_init(void); -void adns_sync(void); -uint8_t adns_serial_read(void); -void adns_serial_write(uint8_t data); -uint8_t adns_read_reg(uint8_t reg_addr); -void adns_write_reg(uint8_t reg_addr, uint8_t data); +void adns_init(void); +void adns_sync(void); +uint8_t adns_serial_read(void); +void adns_serial_write(uint8_t data); +uint8_t adns_read_reg(uint8_t reg_addr); +void adns_write_reg(uint8_t reg_addr, uint8_t data); report_adns_t adns_read_burst(void); -int8_t convert_twoscomp(uint8_t data); -void adns_set_cpi(uint8_t cpi); -bool adns_check_signature(void); +int8_t convert_twoscomp(uint8_t data); +void adns_set_cpi(uint8_t cpi); +bool adns_check_signature(void); diff --git a/drivers/sensors/adns9800.c b/drivers/sensors/adns9800.c index 17966b81f9..b4f683452c 100644 --- a/drivers/sensors/adns9800.c +++ b/drivers/sensors/adns9800.c @@ -20,57 +20,57 @@ #include "adns9800.h" // registers -#define REG_Product_ID 0x00 -#define REG_Revision_ID 0x01 -#define REG_Motion 0x02 -#define REG_Delta_X_L 0x03 -#define REG_Delta_X_H 0x04 -#define REG_Delta_Y_L 0x05 -#define REG_Delta_Y_H 0x06 -#define REG_SQUAL 0x07 -#define REG_Pixel_Sum 0x08 -#define REG_Maximum_Pixel 0x09 -#define REG_Minimum_Pixel 0x0a -#define REG_Shutter_Lower 0x0b -#define REG_Shutter_Upper 0x0c -#define REG_Frame_Period_Lower 0x0d -#define REG_Frame_Period_Upper 0x0e -#define REG_Configuration_I 0x0f -#define REG_Configuration_II 0x10 -#define REG_Frame_Capture 0x12 -#define REG_SROM_Enable 0x13 -#define REG_Run_Downshift 0x14 -#define REG_Rest1_Rate 0x15 -#define REG_Rest1_Downshift 0x16 -#define REG_Rest2_Rate 0x17 -#define REG_Rest2_Downshift 0x18 -#define REG_Rest3_Rate 0x19 -#define REG_Frame_Period_Max_Bound_Lower 0x1a -#define REG_Frame_Period_Max_Bound_Upper 0x1b -#define REG_Frame_Period_Min_Bound_Lower 0x1c -#define REG_Frame_Period_Min_Bound_Upper 0x1d -#define REG_Shutter_Max_Bound_Lower 0x1e -#define REG_Shutter_Max_Bound_Upper 0x1f -#define REG_LASER_CTRL0 0x20 -#define REG_Observation 0x24 -#define REG_Data_Out_Lower 0x25 -#define REG_Data_Out_Upper 0x26 -#define REG_SROM_ID 0x2a -#define REG_Lift_Detection_Thr 0x2e -#define REG_Configuration_V 0x2f -#define REG_Configuration_IV 0x39 -#define REG_Power_Up_Reset 0x3a -#define REG_Shutdown 0x3b -#define REG_Inverse_Product_ID 0x3f -#define REG_Motion_Burst 0x50 -#define REG_SROM_Load_Burst 0x62 -#define REG_Pixel_Burst 0x64 +#define REG_Product_ID 0x00 +#define REG_Revision_ID 0x01 +#define REG_Motion 0x02 +#define REG_Delta_X_L 0x03 +#define REG_Delta_X_H 0x04 +#define REG_Delta_Y_L 0x05 +#define REG_Delta_Y_H 0x06 +#define REG_SQUAL 0x07 +#define REG_Pixel_Sum 0x08 +#define REG_Maximum_Pixel 0x09 +#define REG_Minimum_Pixel 0x0a +#define REG_Shutter_Lower 0x0b +#define REG_Shutter_Upper 0x0c +#define REG_Frame_Period_Lower 0x0d +#define REG_Frame_Period_Upper 0x0e +#define REG_Configuration_I 0x0f +#define REG_Configuration_II 0x10 +#define REG_Frame_Capture 0x12 +#define REG_SROM_Enable 0x13 +#define REG_Run_Downshift 0x14 +#define REG_Rest1_Rate 0x15 +#define REG_Rest1_Downshift 0x16 +#define REG_Rest2_Rate 0x17 +#define REG_Rest2_Downshift 0x18 +#define REG_Rest3_Rate 0x19 +#define REG_Frame_Period_Max_Bound_Lower 0x1a +#define REG_Frame_Period_Max_Bound_Upper 0x1b +#define REG_Frame_Period_Min_Bound_Lower 0x1c +#define REG_Frame_Period_Min_Bound_Upper 0x1d +#define REG_Shutter_Max_Bound_Lower 0x1e +#define REG_Shutter_Max_Bound_Upper 0x1f +#define REG_LASER_CTRL0 0x20 +#define REG_Observation 0x24 +#define REG_Data_Out_Lower 0x25 +#define REG_Data_Out_Upper 0x26 +#define REG_SROM_ID 0x2a +#define REG_Lift_Detection_Thr 0x2e +#define REG_Configuration_V 0x2f +#define REG_Configuration_IV 0x39 +#define REG_Power_Up_Reset 0x3a +#define REG_Shutdown 0x3b +#define REG_Inverse_Product_ID 0x3f +#define REG_Motion_Burst 0x50 +#define REG_SROM_Load_Burst 0x62 +#define REG_Pixel_Burst 0x64 #define ADNS_CLOCK_SPEED 2000000 #define MIN_CPI 200 #define MAX_CPI 8200 #define CPI_STEP 200 -#define CLAMP_CPI(value) value < MIN_CPI ? MIN_CPI : value > MAX_CPI ? MAX_CPI : value +#define CLAMP_CPI(value) value<MIN_CPI ? MIN_CPI : value> MAX_CPI ? MAX_CPI : value #define SPI_MODE 3 #define SPI_DIVISOR (F_CPU / ADNS_CLOCK_SPEED) #define US_BETWEEN_WRITES 120 @@ -80,12 +80,9 @@ extern const uint8_t firmware_data[]; -void adns_spi_start(void){ - spi_start(SPI_SS_PIN, false, SPI_MODE, SPI_DIVISOR); -} - -void adns_write(uint8_t reg_addr, uint8_t data){ +void adns_spi_start(void) { spi_start(SPI_SS_PIN, false, SPI_MODE, SPI_DIVISOR); } +void adns_write(uint8_t reg_addr, uint8_t data) { adns_spi_start(); spi_write(reg_addr | MSB1); spi_write(data); @@ -93,10 +90,9 @@ void adns_write(uint8_t reg_addr, uint8_t data){ wait_us(US_BETWEEN_WRITES); } -uint8_t adns_read(uint8_t reg_addr){ - +uint8_t adns_read(uint8_t reg_addr) { adns_spi_start(); - spi_write(reg_addr & 0x7f ); + spi_write(reg_addr & 0x7f); uint8_t data = spi_read(); spi_stop(); wait_us(US_BETWEEN_READS); @@ -105,7 +101,6 @@ uint8_t adns_read(uint8_t reg_addr){ } void adns_init() { - setPinOutput(SPI_SS_PIN); spi_init(); @@ -144,7 +139,7 @@ void adns_init() { // send all bytes of the firmware unsigned char c; - for(int i = 0; i < FIRMWARE_LENGTH; i++){ + for (int i = 0; i < FIRMWARE_LENGTH; i++) { c = (unsigned char)pgm_read_byte(firmware_data + i); spi_write(c); wait_us(15); @@ -161,7 +156,7 @@ void adns_init() { config_adns_t adns_get_config(void) { uint8_t config_1 = adns_read(REG_Configuration_I); - return (config_adns_t){ (config_1 & 0xFF) * CPI_STEP }; + return (config_adns_t){(config_1 & 0xFF) * CPI_STEP}; } void adns_set_config(config_adns_t config) { @@ -169,20 +164,17 @@ void adns_set_config(config_adns_t config) { adns_write(REG_Configuration_I, config_1); } -static int16_t convertDeltaToInt(uint8_t high, uint8_t low){ - +static int16_t convertDeltaToInt(uint8_t high, uint8_t low) { // join bytes into twos compliment uint16_t twos_comp = (high << 8) | low; // convert twos comp to int - if (twos_comp & 0x8000) - return -1 * (~twos_comp + 1); + if (twos_comp & 0x8000) return -1 * (~twos_comp + 1); return twos_comp; } report_adns_t adns_get_report(void) { - report_adns_t report = {0, 0}; adns_spi_start(); @@ -194,8 +186,7 @@ report_adns_t adns_get_report(void) { uint8_t motion = spi_read(); - if(motion & 0x80) { - + if (motion & 0x80) { // clear observation register spi_read(); diff --git a/drivers/sensors/adns9800.h b/drivers/sensors/adns9800.h index 2f50b8f1be..d19ded4012 100644 --- a/drivers/sensors/adns9800.h +++ b/drivers/sensors/adns9800.h @@ -28,8 +28,8 @@ typedef struct { int16_t y; } report_adns_t; -void adns_init(void); +void adns_init(void); config_adns_t adns_get_config(void); -void adns_set_config(config_adns_t); +void adns_set_config(config_adns_t); /* Reads and clears the current delta values on the ADNS sensor */ report_adns_t adns_get_report(void); diff --git a/drivers/sensors/pmw3360.c b/drivers/sensors/pmw3360.c index 5463bfc594..79b653e452 100644 --- a/drivers/sensors/pmw3360.c +++ b/drivers/sensors/pmw3360.c @@ -23,55 +23,55 @@ #include "pmw3360_firmware.h" // Registers -#define REG_Product_ID 0x00 -#define REG_Revision_ID 0x01 -#define REG_Motion 0x02 -#define REG_Delta_X_L 0x03 -#define REG_Delta_X_H 0x04 -#define REG_Delta_Y_L 0x05 -#define REG_Delta_Y_H 0x06 -#define REG_SQUAL 0x07 -#define REG_Raw_Data_Sum 0x08 -#define REG_Maximum_Raw_data 0x09 -#define REG_Minimum_Raw_data 0x0A -#define REG_Shutter_Lower 0x0B -#define REG_Shutter_Upper 0x0C -#define REG_Control 0x0D -#define REG_Config1 0x0F -#define REG_Config2 0x10 -#define REG_Angle_Tune 0x11 -#define REG_Frame_Capture 0x12 -#define REG_SROM_Enable 0x13 -#define REG_Run_Downshift 0x14 -#define REG_Rest1_Rate_Lower 0x15 -#define REG_Rest1_Rate_Upper 0x16 -#define REG_Rest1_Downshift 0x17 -#define REG_Rest2_Rate_Lower 0x18 -#define REG_Rest2_Rate_Upper 0x19 -#define REG_Rest2_Downshift 0x1A -#define REG_Rest3_Rate_Lower 0x1B -#define REG_Rest3_Rate_Upper 0x1C -#define REG_Observation 0x24 -#define REG_Data_Out_Lower 0x25 -#define REG_Data_Out_Upper 0x26 -#define REG_Raw_Data_Dump 0x29 -#define REG_SROM_ID 0x2A -#define REG_Min_SQ_Run 0x2B -#define REG_Raw_Data_Threshold 0x2C -#define REG_Config5 0x2F -#define REG_Power_Up_Reset 0x3A -#define REG_Shutdown 0x3B -#define REG_Inverse_Product_ID 0x3F -#define REG_LiftCutoff_Tune3 0x41 -#define REG_Angle_Snap 0x42 -#define REG_LiftCutoff_Tune1 0x4A -#define REG_Motion_Burst 0x50 -#define REG_LiftCutoff_Tune_Timeout 0x58 +#define REG_Product_ID 0x00 +#define REG_Revision_ID 0x01 +#define REG_Motion 0x02 +#define REG_Delta_X_L 0x03 +#define REG_Delta_X_H 0x04 +#define REG_Delta_Y_L 0x05 +#define REG_Delta_Y_H 0x06 +#define REG_SQUAL 0x07 +#define REG_Raw_Data_Sum 0x08 +#define REG_Maximum_Raw_data 0x09 +#define REG_Minimum_Raw_data 0x0A +#define REG_Shutter_Lower 0x0B +#define REG_Shutter_Upper 0x0C +#define REG_Control 0x0D +#define REG_Config1 0x0F +#define REG_Config2 0x10 +#define REG_Angle_Tune 0x11 +#define REG_Frame_Capture 0x12 +#define REG_SROM_Enable 0x13 +#define REG_Run_Downshift 0x14 +#define REG_Rest1_Rate_Lower 0x15 +#define REG_Rest1_Rate_Upper 0x16 +#define REG_Rest1_Downshift 0x17 +#define REG_Rest2_Rate_Lower 0x18 +#define REG_Rest2_Rate_Upper 0x19 +#define REG_Rest2_Downshift 0x1A +#define REG_Rest3_Rate_Lower 0x1B +#define REG_Rest3_Rate_Upper 0x1C +#define REG_Observation 0x24 +#define REG_Data_Out_Lower 0x25 +#define REG_Data_Out_Upper 0x26 +#define REG_Raw_Data_Dump 0x29 +#define REG_SROM_ID 0x2A +#define REG_Min_SQ_Run 0x2B +#define REG_Raw_Data_Threshold 0x2C +#define REG_Config5 0x2F +#define REG_Power_Up_Reset 0x3A +#define REG_Shutdown 0x3B +#define REG_Inverse_Product_ID 0x3F +#define REG_LiftCutoff_Tune3 0x41 +#define REG_Angle_Snap 0x42 +#define REG_LiftCutoff_Tune1 0x4A +#define REG_Motion_Burst 0x50 +#define REG_LiftCutoff_Tune_Timeout 0x58 #define REG_LiftCutoff_Tune_Min_Length 0x5A -#define REG_SROM_Load_Burst 0x62 -#define REG_Lift_Config 0x63 -#define REG_Raw_Data_Burst 0x64 -#define REG_LiftCutoff_Tune2 0x65 +#define REG_SROM_Load_Burst 0x62 +#define REG_Lift_Config 0x63 +#define REG_Raw_Data_Burst 0x64 +#define REG_LiftCutoff_Tune2 0x65 bool _inBurst = false; diff --git a/drivers/sensors/pmw3360.h b/drivers/sensors/pmw3360.h index 124c62cf00..7429a6ba09 100644 --- a/drivers/sensors/pmw3360.h +++ b/drivers/sensors/pmw3360.h @@ -66,20 +66,17 @@ typedef struct { int8_t mdy; } report_pmw_t; - - -bool spi_start_adv(void); -void spi_stop_adv(void); +bool spi_start_adv(void); +void spi_stop_adv(void); spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data); -uint8_t spi_read_adv(uint8_t reg_addr); -bool pmw_spi_init(void); -void pmw_set_cpi(uint16_t cpi); -uint16_t pmw_get_cpi(void); -void pmw_upload_firmware(void); -bool pmw_check_signature(void); +uint8_t spi_read_adv(uint8_t reg_addr); +bool pmw_spi_init(void); +void pmw_set_cpi(uint16_t cpi); +uint16_t pmw_get_cpi(void); +void pmw_upload_firmware(void); +bool pmw_check_signature(void); report_pmw_t pmw_read_burst(void); - #define degToRad(angleInDegrees) ((angleInDegrees)*M_PI / 180.0) #define radToDeg(angleInRadians) ((angleInRadians)*180.0 / M_PI) #define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt))) diff --git a/platforms/avr/drivers/analog.h b/platforms/avr/drivers/analog.h index b3c05e1976..fa2fb0d89b 100644 --- a/platforms/avr/drivers/analog.h +++ b/platforms/avr/drivers/analog.h @@ -22,7 +22,7 @@ #ifdef __cplusplus extern "C" { #endif -void analogReference(uint8_t mode); +void analogReference(uint8_t mode); int16_t analogReadPin(pin_t pin); uint8_t pinToMux(pin_t pin); diff --git a/quantum/action.c b/quantum/action.c index 8c34b84ef1..5c33bd6d2c 100644 --- a/quantum/action.c +++ b/quantum/action.c @@ -821,9 +821,10 @@ void register_code(uint8_t code) { } #endif - else if IS_KEY (code) { - // TODO: should push command_proc out of this block? - if (command_proc(code)) return; + else if + IS_KEY(code) { + // TODO: should push command_proc out of this block? + if (command_proc(code)) return; #ifndef NO_ACTION_ONESHOT /* TODO: remove @@ -840,33 +841,35 @@ void register_code(uint8_t code) { } else */ #endif - { - // Force a new key press if the key is already pressed - // without this, keys with the same keycode, but different - // modifiers will be reported incorrectly, see issue #1708 - if (is_key_pressed(keyboard_report, code)) { - del_key(code); + { + // Force a new key press if the key is already pressed + // without this, keys with the same keycode, but different + // modifiers will be reported incorrectly, see issue #1708 + if (is_key_pressed(keyboard_report, code)) { + del_key(code); + send_keyboard_report(); + } + add_key(code); send_keyboard_report(); } - add_key(code); + } + else if + IS_MOD(code) { + add_mods(MOD_BIT(code)); send_keyboard_report(); } - } else if IS_MOD (code) { - add_mods(MOD_BIT(code)); - send_keyboard_report(); - } #ifdef EXTRAKEY_ENABLE - else if IS_SYSTEM (code) { - host_system_send(KEYCODE2SYSTEM(code)); - } else if IS_CONSUMER (code) { - host_consumer_send(KEYCODE2CONSUMER(code)); - } + else if + IS_SYSTEM(code) { host_system_send(KEYCODE2SYSTEM(code)); } + else if + IS_CONSUMER(code) { host_consumer_send(KEYCODE2CONSUMER(code)); } #endif #ifdef MOUSEKEY_ENABLE - else if IS_MOUSEKEY (code) { - mousekey_on(code); - mousekey_send(); - } + else if + IS_MOUSEKEY(code) { + mousekey_on(code); + mousekey_send(); + } #endif } @@ -911,22 +914,26 @@ void unregister_code(uint8_t code) { } #endif - else if IS_KEY (code) { - del_key(code); - send_keyboard_report(); - } else if IS_MOD (code) { - del_mods(MOD_BIT(code)); - send_keyboard_report(); - } else if IS_SYSTEM (code) { - host_system_send(0); - } else if IS_CONSUMER (code) { - host_consumer_send(0); - } + else if + IS_KEY(code) { + del_key(code); + send_keyboard_report(); + } + else if + IS_MOD(code) { + del_mods(MOD_BIT(code)); + send_keyboard_report(); + } + else if + IS_SYSTEM(code) { host_system_send(0); } + else if + IS_CONSUMER(code) { host_consumer_send(0); } #ifdef MOUSEKEY_ENABLE - else if IS_MOUSEKEY (code) { - mousekey_off(code); - mousekey_send(); - } + else if + IS_MOUSEKEY(code) { + mousekey_off(code); + mousekey_send(); + } #endif } diff --git a/quantum/action.h b/quantum/action.h index 8a357ded87..b562f18c5b 100644 --- a/quantum/action.h +++ b/quantum/action.h @@ -88,7 +88,7 @@ extern bool disable_action_cache; /* Code for handling one-handed key modifiers. */ #ifdef SWAP_HANDS_ENABLE -extern bool swap_hands; +extern bool swap_hands; extern const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS]; # if (MATRIX_COLS <= 8) typedef uint8_t swap_state_row_t; diff --git a/quantum/action_tapping.c b/quantum/action_tapping.c index 36839f9faf..60e56fb811 100644 --- a/quantum/action_tapping.c +++ b/quantum/action_tapping.c @@ -18,11 +18,11 @@ # define IS_TAPPING_PRESSED() (IS_TAPPING() && tapping_key.event.pressed) # define IS_TAPPING_RELEASED() (IS_TAPPING() && !tapping_key.event.pressed) # define IS_TAPPING_KEY(k) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (k))) -#ifndef COMBO_ENABLE -# define IS_TAPPING_RECORD(r) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (r->event.key))) -#else -# define IS_TAPPING_RECORD(r) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (r->event.key)) && tapping_key.keycode == r->keycode) -#endif +# ifndef COMBO_ENABLE +# define IS_TAPPING_RECORD(r) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (r->event.key))) +# else +# define IS_TAPPING_RECORD(r) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (r->event.key)) && tapping_key.keycode == r->keycode) +# endif __attribute__((weak)) uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { return TAPPING_TERM; } @@ -212,11 +212,15 @@ bool process_tapping(keyrecord_t *keyp) { if (tapping_key.tap.count > 1) { debug("Tapping: Start new tap with releasing last tap(>1).\n"); // unregister key - process_record(&(keyrecord_t){.tap = tapping_key.tap, .event.key = tapping_key.event.key, .event.time = event.time, .event.pressed = false, -#ifdef COMBO_ENABLE - .keycode = tapping_key.keycode, -#endif - }); + process_record(&(keyrecord_t){ + .tap = tapping_key.tap, + .event.key = tapping_key.event.key, + .event.time = event.time, + .event.pressed = false, +# ifdef COMBO_ENABLE + .keycode = tapping_key.keycode, +# endif + }); } else { debug("Tapping: Start while last tap(1).\n"); } @@ -254,11 +258,15 @@ bool process_tapping(keyrecord_t *keyp) { if (tapping_key.tap.count > 1) { debug("Tapping: Start new tap with releasing last timeout tap(>1).\n"); // unregister key - process_record(&(keyrecord_t){.tap = tapping_key.tap, .event.key = tapping_key.event.key, .event.time = event.time, .event.pressed = false, -#ifdef COMBO_ENABLE - .keycode = tapping_key.keycode, -#endif - }); + process_record(&(keyrecord_t){ + .tap = tapping_key.tap, + .event.key = tapping_key.event.key, + .event.time = event.time, + .event.pressed = false, +# ifdef COMBO_ENABLE + .keycode = tapping_key.keycode, +# endif + }); } else { debug("Tapping: Start while last timeout tap(1).\n"); } diff --git a/quantum/debounce/asym_eager_defer_pk.c b/quantum/debounce/asym_eager_defer_pk.c index 24380dc5e5..81f39383c4 100644 --- a/quantum/debounce/asym_eager_defer_pk.c +++ b/quantum/debounce/asym_eager_defer_pk.c @@ -46,17 +46,17 @@ When no state changes have occured for DEBOUNCE milliseconds, we push the state. #define ROW_SHIFTER ((matrix_row_t)1) typedef struct { - bool pressed : 1; + bool pressed : 1; uint8_t time : 7; } debounce_counter_t; #if DEBOUNCE > 0 static debounce_counter_t *debounce_counters; -static fast_timer_t last_time; -static bool counters_need_update; -static bool matrix_need_update; +static fast_timer_t last_time; +static bool counters_need_update; +static bool matrix_need_update; -#define DEBOUNCE_ELAPSED 0 +# define DEBOUNCE_ELAPSED 0 static void update_debounce_counters_and_transfer_if_expired(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t elapsed_time); static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows); @@ -64,7 +64,7 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui // we use num_rows rather than MATRIX_ROWS to support split keyboards void debounce_init(uint8_t num_rows) { debounce_counters = malloc(num_rows * MATRIX_COLS * sizeof(debounce_counter_t)); - int i = 0; + int i = 0; for (uint8_t r = 0; r < num_rows; r++) { for (uint8_t c = 0; c < MATRIX_COLS; c++) { debounce_counters[i++].time = DEBOUNCE_ELAPSED; @@ -81,10 +81,10 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool bool updated_last = false; if (counters_need_update) { - fast_timer_t now = timer_read_fast(); + fast_timer_t now = timer_read_fast(); fast_timer_t elapsed_time = TIMER_DIFF_FAST(now, last_time); - last_time = now; + last_time = now; updated_last = true; if (elapsed_time > UINT8_MAX) { elapsed_time = UINT8_MAX; @@ -108,7 +108,7 @@ static void update_debounce_counters_and_transfer_if_expired(matrix_row_t raw[], debounce_counter_t *debounce_pointer = debounce_counters; counters_need_update = false; - matrix_need_update = false; + matrix_need_update = false; for (uint8_t row = 0; row < num_rows; row++) { for (uint8_t col = 0; col < MATRIX_COLS; col++) { @@ -146,8 +146,8 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui if (delta & col_mask) { if (debounce_pointer->time == DEBOUNCE_ELAPSED) { debounce_pointer->pressed = (raw[row] & col_mask); - debounce_pointer->time = DEBOUNCE; - counters_need_update = true; + debounce_pointer->time = DEBOUNCE; + counters_need_update = true; if (debounce_pointer->pressed) { // key-down: eager diff --git a/quantum/debounce/sym_defer_g.c b/quantum/debounce/sym_defer_g.c index fbefd55ede..9155eb914c 100644 --- a/quantum/debounce/sym_defer_g.c +++ b/quantum/debounce/sym_defer_g.c @@ -25,7 +25,7 @@ When no state changes have occured for DEBOUNCE milliseconds, we push the state. #endif #if DEBOUNCE > 0 -static bool debouncing = false; +static bool debouncing = false; static fast_timer_t debouncing_time; void debounce_init(uint8_t num_rows) {} diff --git a/quantum/debounce/sym_defer_pk.c b/quantum/debounce/sym_defer_pk.c index 626a9be841..1b698ba347 100644 --- a/quantum/debounce/sym_defer_pk.c +++ b/quantum/debounce/sym_defer_pk.c @@ -49,7 +49,7 @@ static debounce_counter_t *debounce_counters; static fast_timer_t last_time; static bool counters_need_update; -#define DEBOUNCE_ELAPSED 0 +# define DEBOUNCE_ELAPSED 0 static void update_debounce_counters_and_transfer_if_expired(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t elapsed_time); static void start_debounce_counters(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows); @@ -74,10 +74,10 @@ void debounc |