# usbbridge

krebsplug will start up as usbbridge with usbip-utils.
it will run an usbipd and grab an ip-address via dhcp.

# setup
connect usb-device and then connect krebsplug to power.
when changing the usb-device, detach it on the client side, 
power off the krebsplug, attach usb device and power up
then.

# usage
## client side attach

    modprobe vhci-hcd
    usbip list -r <<KREBSIP>>
    usbip attach -h <<KREBSIP>> -p 1-1

## client side detach

    usbip detach -p 0