summaryrefslogtreecommitdiffstats
path: root/src/vty/command.c
Commit message (Collapse)AuthorAgeFilesLines
* vty: omit HIDDEN from vty referenceNeels Hofmeyr2018-09-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | During 'show online help', the XML vty node dump, omit all commands marked HIDDEN. These commands were already hidden from the VTY reference prior to commit I1f18e0e41da4772d092d71261b9e489dc1598923, because of broken/confusing bit and boolean logic mixup. After that commit, HIDDEN commands end up in the doc. So practically, this patch here brings back the status quo of before above commit, even though the previous code clearly "intended" to list HIDDEN commands in the reference but failed to have that effect. AFAICT the complete list of commands currently hidden is: * osmo-bsc: bts/"training_sequence_code <0-7>", * osmo-bsc: ts/"phys_chan_config PCHAN" for uppercase pchans; * osmo-bts: bts/"rtp bind-ip A.B.C.D" which actually says vty_out(vty, "%% rtp bind-ip is now deprecated%s", VTY_NEWLINE); * osmo-sgsn: 'reset sgsn state' used for SGSN testing. Note that the osmo-sgsn build was broken by including hidden commands in the vty reference, since one of its hidden commands had missing doc strings and made osmotestconfig.py signal failure. This would fix that from the hide-hidden-commands angle, and so would osmo-sgsn commit I8b6e8615e409266910f2f76a10ced9ab33e4de91 from the fix-the-doc-strings angle. Change-Id: I92c3c66ff69c186234276c64478d6342e061d25e
* vty list: fix deprecation/hidden bit logicNeels Hofmeyr2018-09-241-2/+1
| | | | | | | | | | If a command is both hidden and deprecated, still don't show it for the 'list' command. We currently have no such nodes, as it seems, though. Related: OS#3584 Change-Id: I07ec15cab057a3e09064e0420a69121ee8eb4253
* vty reference: fix deprecation bit evaluationNeels Hofmeyr2018-09-241-2/+2
| | | | | | | | | | | In vty_dump_nodes(), make sure the bitwise & is evaluated first. For the deprecation flag (0x1), the practical effect is most likely identical, assuming that the boolean ! operator flips the first bit, so I expect no visible functional difference. It still was confusing and wrong to look at. Related: OS#3584 Change-Id: I1f18e0e41da4772d092d71261b9e489dc1598923
* vty: fix use-after-free and memleaks in is_cmd_ambiguous()Neels Hofmeyr2018-07-111-20/+43
| | | | | | | | | | | | | | | | | | | | | | | vty_test: add test against ambiguous cmd causing use-after-free and memory leaks. Add this test along with the fix, because the new test triggers the memory use-after-free and leaks, causing build failures. Add cmd_deopt_with_ctx() to allow passing a specific talloc ctx. is_cmd_ambiguous(): keep all cmd_deopt() allocations until the function exits. Add a comment explaining why. Before this, if a command matched an optional "[arg]" with square brackets, we would keep it in local var 'matched', but we would free the string it points to at the end of that loop iteration; upon encountering another match, we would attempt to strcmp against the freed 'matched'. Instead of adding hard-to-read and -verify free/alloc dances to keep the 'matched' accurately freed/non-freed/..., just keep all cmd_deopt() string allocated until done. Needless to say that this should have been implemented on a lower level upon inventing optional args, but at least this is fixing a program crash. Related: OS#33903390 Change-Id: Ia71ba742108b5ff020997bfb612ad5eb30d04fcd
* vty: cosmetic: cmd_deopt(): use talloc_strndup(), not memcpy()Neels Hofmeyr2018-07-091-8/+1
| | | | Change-Id: Ibf870ae02be706f802482f7cff6589a70cde8320
* vty/command.c: talloc from tall_vty_cmd_ctx, not NULLNeels Hofmeyr2018-07-091-3/+3
| | | | Change-Id: Iaa409b4f63557c8fb028bbb322b5e7253393c05c
* vty: Don't dump deprecated commands in XML exportHarald Welte2018-06-091-2/+4
| | | | | | | we don't want to include deprecated commands in our VTY reference manuals. Change-Id: I5e179c9dca297b8c4bdbdf4e0e5b1d69eecc4232
* vty/command.c: write_config_file(): sanely compose temp pathNeels Hofmeyr2018-03-281-1/+11
| | | | | | | | | | | | | | | Fix GCC version 7.3.0 (Debian 7.3.0-12) compiler warning: ../../../../src/libosmocore/src/vty/command.c: In function ‘write_config_file’: ../../../../src/libosmocore/src/vty/command.c:2741:2: error: null destination pointer [-Werror=format-overflow=] sprintf(config_file_tmp, "%s.XXXXXX", config_file); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Check agains NULL after each _talloc_zero() in write_config_file(). While at it, add a comment explaining why we don't use talloc_asprintf() instead. Change-Id: I7bdc52afe724c1d21f419fe49a6e2ebca9420969
* vty: set name for VIEW+ENABLE nodes, for VTY referenceNeels Hofmeyr2017-12-101-0/+4
| | | | | | This leaves no unnamed chapters in future VTY reference documents. Change-Id: Iefb8b78094208a1a4c5d70bd6c69a3deca8da54f
* VTY reference: use node names as section namesNeels Hofmeyr2017-12-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 'show online-help' output, add the node names (currently all derived from the prompt) as <node><name> entry, so that in the osmo-gsm-manuals, each section of node commands gets a title. So far, each section of commands has no name at all, and it is entirely up for guessing which part of the VTY the commands are about. Node section names, e.g. for OsmoHLR, will be like 1 VTY reference 1.4 config 1.5 config-log 1.6 config-line 1.7 config-ctrl 1.8 config-hlr 1.9 config-hlr-gsup Before this patch, all but '1 VTY reference' were plain empty. A better solution would be to list the actual command name that enters the node, and to nest the commands identically to VTY node nesting, but since this information is currently hidden in node command implementations, it is impossible to derive it. So we should actually make the VTY reflect the node nesting structure in its data model, which would resolve both the accurate node name problem as well as produce well-structured output to generate the VTY references from. This patch is a workaround for lack of a more profound fix of the VTY data model. At least it makes the VTY references' sections even remotely useful. Change-Id: Iaf745b2ab3d9b02fc47025a0eba3beb711068bfe
* VTY reference: do not list empty nodesNeels Hofmeyr2017-12-101-0/+2
| | | | | | | In 'show online-help' output, don't list nodes that have no commands (the 'Password' node). Change-Id: I3bd6883a87b8b893e560ceadfffbf41bc380109c
* vty XML export: avoid repeating common node commands for each nodeNeels Hofmeyr2017-12-101-0/+45
| | | | | | | | | | | We use 'show online-help' to generate VTY reference manuals. It is not helpful to include the common node commands on each and every node level, it clutters the actual useful help. Have a separate first section called 'Common Commands', but omit them elsewhere. Change-Id: Ie802eccad80887968b10269ff9c0e9797268e0d4
* Fix/Update copyright notices; Add SPDX annotationHarald Welte2017-11-131-0/+6
| | | | | | | | Let's fix some erroneous/accidential references to wrong license, update copyright information where applicable and introduce a SPDX-License-Identifier to all files. Change-Id: I39af26c6aaaf5c926966391f6565fc5936be21af
* vty: Fix bad use of vector_slot()Pau Espin Pedrol2017-11-101-1/+1
| | | | | | | | | | | | | | | | | | Commit in e9e9e427b78271941a25a63567fc2ec2bb9e4433 attempted to fix a compilation warning but introduced a regression documented in OS#2613. The commit was reverted in 4aa0258269296f078e685e21fb08b115567e814. After closer lookup and testing, it seems vector_slot(vline, index) is expected to be NULL in this case as set by vty_complete_command: /* In case of 'help \t'. */ if (isspace((int)vty->buf[vty->length - 1])) vector_set(vline, NULL); As a result, the correct fix for the compilation warning is to test against NULL instead of testing for empty string. Change-Id: Id9e02bbf89e0a94e1766b1efd236538712415c8a
* Revert "vty: Fix bad use of vector_slot()"Neels Hofmeyr2017-11-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | The patch seemed sensible, but introduces a segfault when hitting tab on the interactive VTY. Reproduction example: osmo-msc telnet 127.0.0.1 4254 OsmoMSC> enable <TAB> So we need to understand what that line of code actually intends to do. Until then, revert this to avoid the segfault. The segfault happens at: Program received signal SIGSEGV, Segmentation fault. 0x00007ffff7bc0894 in cmd_complete_command_real (vline=0x5555558d59e0, vty=0x5555558d57b0, status=0x7fffffffe024) at ../../../../src/libosmocore/src/vty/command.c:1953 1953 if (*(char *)vector_slot(vline, index) == '\0') This reverts commit e9e9e427b78271941a25a63567fc2ec2bb9e4433. Change-Id: I3fe213bdfb96de9469aae64e67000dafee59302e
* vty: Fix bad use of vector_slot()Pau Espin Pedrol2017-10-241-1/+1
| | | | | | | | | | | | | | | | | | | Fixes the compilation warning below: git/libosmocore/src/vty/command.c: In function ‘cmd_complete_command_real’: git/libosmocore/src/vty/command.c:1953:33: warning: comparison between pointer and zero character const ant [-Wpointer-compare] if (vector_slot(vline, index) == '\0') ^~ git/libosmocore/src/vty/command.c:37:0: git/libosmocore/include/osmocom/vty/vector.h:39:27: note: did you mean to dereference the pointer? #define vector_slot(V,I) ((V)->index[(I)]) ^ git/libosmocore/src/vty/command.c:1953:7: note: in expansion of macro ‘vector_slot’ if (vector_slot(vline, index) == '\0') ^~~~~~~~~~~ Change-Id: Iaba9e3450d68c51e16a7bda2fc0fc370992ca866
* vty: install 'exit', 'end',... commands on *all* nodesNeels Hofmeyr2017-09-271-13/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In many callers of the VTY API, we are lacking the vty_install_default() step at certain node levels. This creates nodes that lack the 'exit' command, and hence the only way to exit such a node is to restart the telnet session. Historically, the VTY looked for missing commands on the immediate parent node, and hence possibly found the parent's 'exit' command when the local node was missing it. That is why we so far did not notice the missing default commands. Furthermore, some callers call install_default() instead of vty_install_default(). Only vty_install_default() also includes the 'exit' and 'end' commands. There is no reason why there are two sets of default commands. To end this confusion, to catch all missing 'exit' commands and to prevent this from re-appearing in the future, simply *always* install all default commands implicitly when calling install_node(). In cmd_init(), there are some top-level nodes that apparently do not want the default commands installed. Keep those the way they are, by changing the invocation to new install_node_bare() ({VIEW,AUTH,AUTH_ENABLE}_NODE). Make both install_default() and vty_install_default() no-ops so that users of the API may still call them without harm. Do not yet deprecate yet, which follows in Icf5d83f641e838cebcccc635a043e94ba352abff. Drop all invocations to these two functions found in libosmocore. Change-Id: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
* vty: derive node name from prompt, use as XML idsNeels Hofmeyr2017-09-231-1/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'show online-help' produces XML output with <node id="..."> ids. We reference those from the osmo-gsm-manuals. Instead of numeric IDs coming from internal code, rather use a human-readable node ID -- referencing id='config-msc' is much easier than referencing id='23'. Add a char name[] to struct cmd_node, to hold this name. This may be provided upon struct definition. Since callers of the VTY API so far don't have a name yet, we would need to add names everywhere to get meaningful node IDs. There is a way to get node ID names without touching dependent code: My first idea was to find out which command entered the node, i.e. command 'msc' enters the MSC_NODE. But it is impossible to derive which command entered which node from data structs, it's hidden in the vty command definition. But in fact all (TM) known API callers indeed provide a prompt string that contains a logical and human readable string name. Thus, if the name is unset in the struct, parse the prompt string and strip all "weird" characters to obtain a node name from that. We can still set names later on, but for now will have meaningful node IDs (e.g. 'config-msc' from '%s(config-msc)# ') without touching any dependent code. When VTY nodes get identical node names, which is quite possible, the XML export de-dups these by appending _2, _3,... suffixes. The first occurence is called e.g. 'name', the second 'name_2', then 'name_3', and so forth. If a node has no name (even after parsing the prompt), it will be named merely by the suffix. The first empty node will become id='_1', then '_2', '_3', and so forth. This happens for nodes like VIEW_NODE or AUTH_NODE. If this is merged, we need to adjust the references in osmo-gsm-manuals.git. This can happen in our own time though, because we manually create the vty reference xml and copy it to the osmo-gsm-manuals.git and then update the references from the vty_additions.xml. This anyway has to happen because currently the references tend to be hopelessly out of sync anyway, placing comments at wildly unrelated VTY commands. Change-Id: I8fa555570268b231c5e01727c661da92fad265de
* vty: use internal node id for xml idsNeels Hofmeyr2017-09-231-1/+1
| | | | | | | | | | | | | The 'show online-help' produces XML output with <node id="..."> ids. We reference those from the osmo-gsm-manuals, but until now, these ids fall out of sync when the amount of VTY nodes changes. Change these ids to use the internal node ID constant (as in enum bsc_vty_node) instead of a simple counter. If this is merged, we need to adjust the references in osmo-gsm-manuals.git. Change-Id: Ib07fb9d9106e19f5be6539493e82b5d5991f8bc2
* comment: describe indent_cmp()Neels Hofmeyr2017-09-201-0/+4
| | | | Change-Id: Ia58c16d995f6751bdd69defe8a46665aee163f3d
* fix vty regression: empty parent nodeNeels Hofmeyr2017-09-201-7/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | The recent exit-by-indent patch breaks a VTY case where a node is entered but directly followed by a sibling or ancestor without listing any child nodes. Regression introduced by I24cbb3f6de111f2d31110c3c484c066f1153aac9. An example is a common usage in osmo-bts, where 'phy N' / 'instance N' is a parent node that is commonly left empty: phy 0 instance 0 bts 0 band 1800 Before this patch, this case produces the error: There is no such command. Error occurred during reading the below line: bts 0 Fix indentation parsing logic in command.c to accomodate this case. Add a unit test for empty parent node. Change-Id: Ia0880a17ae55accb092ae8585cc3a1bec9986891
* VTY: implicit node exit by de-indenting, not parent lookupNeels Hofmeyr2017-09-191-24/+192
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note: This will break users' config files if they do not use consistent indenting. (see below for a definition of "consistent".) When reading VTY commands from a file, use indenting as means to implicitly exit child nodes. Do not look for commands in the parent node implicitly. The VTY so far implies 'exit' commands if a VTY line cannot be parsed on the current node, but succeeds on the parent node. That is the mechanism by which our VTY config files do not need 'exit' at the end of each child node. We've hit problems with this in the following scenarios, which will show improved user experience after this patch: *) When both a parent and its child node have commands with identical names: cs7 instace 0 point-code 1.2.3 sccp-address osmo-msc point-code 0.0.1 If I put the parent's command below the child, it is still interpreted in the context of the child node: cs7 instace 0 sccp-address osmo-msc point-code 0.0.1 point-code 1.2.3 Though the indenting lets me assume I am setting the cs7 instance's global PC to 1.2.3, I'm actually overwriting osmo-msc's PC with 1.2.3 and discarding the 0.0.1. *) When a software change moves a VTY command from a child to a parent. Say 'timezone' moved from 'bts' to 'network' level: network timezone 1 2 Say a user still has an old config file with 'timezone' on the child level: network bts 0 timezone 1 2 trx 0 The user would expect an error message that 'timezone' is invalid on the 'bts' level. Instead, the VTY finds the parent node's 'timezone', steps out of 'bts' to the 'network' level, and instead says that the 'trx' command does not exist. Format: Consistent means that two adjacent indenting lines have the exact same indenting characters for the common length: Weird mix if you ask me, but correct and consistent: ROOT <space>PARENT <space><tab><space>CHILD <space><tab><space><tab><tab>GRANDCHILD <space><tab><space><tab><tab>GRANDCHILD2 <space>SIBLING Inconsistent: ROOT <space>PARENT <tab><space>CHILD <space><space><tab>GRANDCHILD <space><tab><tab>GRANDCHILD2 <tab>SIBLING Also, when going back to a parent level, the exact same indenting must be used as before in that node: Incorrect: ROOT <tab>PARENT <tab><tab><tab>CHILD <tab><tab>SIBLING As not really intended side effect, it is also permitted to indent the entire file starting from the root level. We could guard against it but there's no harm: Correct and consistent: <tab>ROOT <tab><tab>PARENT <tab><tab><tab><tab>CHILD <tab><tab>SIBLING Implementation: Track parent nodes state: whenever a command enters a child node, push a parent node onto an llist to remember the exact indentation characters used for that level. As soon as the first line on a child node is parsed, remember this new indentation (which must have a longer strlen() than its parent level) to apply to all remaining child siblings and grandchildren. If the amount of spaces that indent a following VTY command are less than this expected indentation, call vty_go_parent() until it matches up. At any level, if the common length of indentation characters mismatch, abort parsing in error. Transitions to child node are spread across VTY implementations and are hard to change. But transitions to the parent node are all handled by vty_go_parent(). By popping a parent from the list of parents in vty_go_parent(), we can also detect that a command has changed the node without changing the parent, hence it must have stepped into a child node, and we can push a parent frame. The behavior on the interactive telnet VTY remains unchanged. Change-Id: I24cbb3f6de111f2d31110c3c484c066f1153aac9
* VTY: interactive: never look for matching commands on parent nodeNeels Hofmeyr2017-09-081-26/+2
| | | | | | | | | | | | | | | | | | | | | | For interactive telnet VTY, remove the implicit move up to the parent node when a command did not succeed on the current node level. When reading config files, this behavior was useful to allow skipping explicit 'exit' commands. (A different patch deals with that.) In the telnet VTY, this behavior was never necessary. Explicit 'exit' commands can move to the parent node, and typically uninformed users expect to require that. On a telnet VTY, counting indents like for reading config files is not an option: a user will always type from the first column or may paste some leading spaces without intended meaning. After this patch, it is thus no longer possible to paste a complete config across several node levels directly to a telnet session, unless it contains 'exit' commands. Change-Id: Id73cba2dd34676bad8a130e9c45e67a272f19588
* doxygen: unify use of \file across the boardNeels Hofmeyr2017-06-231-2/+2
| | | | | | | | | | | | | | | | | Considering the various styles and implications found in the sources, edit scores of files to follow the same API doc guidelines around the doxygen grouping and the \file tag. Many files now show a short description in the generated API doc that was so far only available as C comment. The guidelines and reasoning behind it is documented at https://osmocom.org/projects/cellular-infrastructure/wiki/Guidelines_for_API_documentation In some instances, remove file comments and add to the corresponding group instead, to be shared among several files (e.g. bitvec). Change-Id: Ifa70e77e90462b5eb2b0457c70fd25275910c72b
* doxygen: enable AUTOBRIEF, drop \briefNeels Hofmeyr2017-06-231-13/+13
| | | | | | | | | | Especially for short descriptions, it is annoying to have to type \brief for every single API doc. Drop all \brief and enable the AUTOBRIEF feature of doxygen, which always takes the first sentence of an API doc as the brief description. Change-Id: I11a8a821b065a128108641a2a63fb5a2b1916e87
* vty/command.c: drop useless assignmentVadim Yanitskiy2017-06-131-1/+1
| | | | Change-Id: Ia30b6481ee570c6cf3e3b38e7a78028c66c036b7
* update/extend doxygen documentationHarald Welte2017-06-121-1/+2
| | | | | | | | | It's a pity that even with this patch we still are fare away from having the whole API documented. However, at least we have a more solid foundation. Updates not only extend the documentation, but also make sure it is rendered properly in the doxygen HTML. Change-Id: I1344bd1a6869fb00de7c1899a8db93bba9bafce3
* vty: OSMO_ASSERT() if two identical commands are installedHarald Welte2017-01-071-0/+19
| | | | | | | | | When the caller installs two identical commands at a given VTY node, the result is that neither of the two commands can ever be executed: The VTY would always complain about "Ambiguous command.". Let's fail fast at program start when two identical commands are intalled. Change-Id: I85ff4640ebb3d8b75a6a9ab5d2f668edb5b7189e
* add osmo_gettimeofday as a shim around gettimeofdayNeels Hofmeyr2016-09-221-1/+1
| | | | | | | This allows feeding a custom time for unit tests by overriding osmo_gettimeofday. Change-Id: Ic7a81a6eb51f27fe452962b91f2eae2070d87089
* add vty call show asciidoc: generate a documentation for countersAlexander Couzens2016-06-141-0/+53
| | | | | | | | | | | For each counter group a ascii doc table is generated containing all single counter with a reference to a section to add additional information to the counter Change-Id: Ia8af883167e5ee631059299b107ea83c8bbffdfb Reviewed-on: https://gerrit.osmocom.org/70 Reviewed-by: Harald Welte <laforge@gnumonks.org> Tested-by: Harald Welte <laforge@gnumonks.org>
* vty: Don't call exit() but rather use OSMO_ASSERT()Harald Welte2015-11-121-15/+4
| | | | | This was pointed out by Jaroslav Skarvada during fedora packaging, and he has a valid point...
* fix FSF address in sources/headersJaroslav Škarvada2015-11-121-2/+2
| | | | Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
* vty: Change API to have node installation be done by intHolger Hans Peter Freyther2015-08-051-4/+4
| | | | | | | | | | | | | | | | We are mixing enums and hope that no short-enums are used. This is leading to a lot compiler warnings generated by clang. Change the API to work with integers. Porting: The go_parent_cb implementations in the applications need to be fixed. The API change leads to a compile time warning. Fixes: abis_om2000_vty.c:46:2: warning: implicit conversion from enumeration type 'enum bsc_vty_node' to different enumeration type 'enum node_type' [-Wenum-conversion] OM2K_NODE, ^~~~~~~~~
* vty: Check with the application before writing the configHolger Hans Peter Freyther2014-12-041-0/+9
| | | | | | | | | For the BSC/NITB application we see that people modify the band without modifying the ARFCN. This creates an unbootable config. Using the new hook the BSC/NITB can check if the config is consistent and prevent the config file being written. Related: SYS#739
* vty: Allow vty_go_parent() in all nodes.Jacob Erlbeck2013-09-111-5/+25
| | | | | | | This patch removes an assertion of node > CONFIG_NODE and changes the function to handle all nodes properly. For the sake of completeness, the generic 'exit' command implementation is extended to work properly with all nodes, too.
* vty: Replace 'enum node_type' by 'int' for last_nodeJacob Erlbeck2013-09-101-1/+1
| | | | | In this case the last_node variable may hold values that are not in enum node_type, so int is used instead.
* vty: Add vty_install_default() and use for the vty nodesJacob Erlbeck2013-09-081-4/+14
| | | | | | | | | | | This adds the vty_install_default() function that is basically the install_default() function plus the registration of the commands 'exit' and 'end'. The latter is only provided in subnodes of ENABLED_NODE and CONFIG_NONE. The VTY test program is extended to check these commands. Ticket: OW#952
* vty: Refactored vty_go_parent(), 'end' and 'exit'Jacob Erlbeck2013-09-081-22/+35
| | | | | | Put all 'exit' logic into vty_go_parent() and replace the implementations of 'exit' and 'end' by generic ones that use vty_go_parent().
* vty: Rename is_config() to is_config_child()Jacob Erlbeck2013-09-081-3/+3
| | | | | The function is_config() returns 0 for CONFIG_NODE. Since that node is a config node, the function is renamed to resolve this.
* vty: Attempt to fix various meam leaks in the VTY lookup codeHolger Hans Peter Freyther