summaryrefslogtreecommitdiffstats
path: root/src/gb
Commit message (Collapse)AuthorAgeFilesLines
* return error to sender upon bssgp_tlv_parse() failureStefan Sperling2018-06-251-0/+2
| | | | | | | | | | Return "invalid mandatory information" error status to the sender in case bssgp_tlv_parse() failed. To avoid loops, do not respond with an error status to STATUS PDUs which failed parsing. Change-Id: If73719b75a94d6742bdefc9b6572525cb00a96ee Related: OS#3178
* check bssgp_tlv_parse() return code in bssgp_rcvmsg()Stefan Sperling2018-06-251-0/+5
| | | | | | | | | | | The return code from bssgp_tlv_parse() was not checked for a parsing error. In case of a parsing error the stored return code could have been overwritten later in this function. Explicitly check for a parsing error and log corresponding packets. Change-Id: Id3d7c52ec3df2bcf4efcee0e0b14fe22ef96964e Related: OS#3178
* Add function gprs_nsvc_state_appendDaniel Willmann2018-06-142-0/+23
| | | | | | A common function to append the nsvc state from osmo-sgsn or osmo-gbproxy Change-Id: I7f0eaff7329ab98cad792d30b20ab053007aab85
* implement support for 3-digit MNC with leading zerosNeels Hofmeyr2018-02-283-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable representing three-digit MNC with leading zeros. The MNCs 23 and 023 are actually different; so far we treated both as 23. Re-encode an incoming BCD or string of 023 as it were, i.e. not dropping the leading zero as 23. Break ABI compatibility by changing the size and ordering of structs gprs_ra_id, osmo_plmn_id, osmo_cell_global_id, ... by adding an mnc_3_digits flag. Change ordering in gprs_ra_id because the canonical oder is {Mobile Country Code, Mobile Network Code}, so have the mcc member first. ABI compatibility cannot be maintained for struct gprs_ra_id, since it is a direct member of structs bssgp_bvc_ctx and bssgp_paging_info, and even just adding a flag to the end would cause ABI changes of those structs. Similarly, osmo_plmn_id is a direct member of osmo_location_area_id, and so forth. Add new API to set and read this additional flag to preserve leading zeros: - osmo_plmn_to_bcd(), osmo_plmn_from_bcd() after gsm48_mcc_mnc_to_bcd() and gsm48_mcc_mnc_from_bcd(). - gsm48_decode_lai2(), gsm48_generate_lai2() after gsm48_decode_lai(), gsm48_generate_lai(). - gsm0808_create_layer3_2() after gsm0808_create_layer3() and gsm0808_create_layer3_aoip(). - various osmo_*_name() functions in gsm23003.h (osmo_rai_name() still in gsm48.h close to struct gprs_ra_id definition). The amount and duplication of these may seem a bit overboard, but IMO they do make sense in this way. Though most code will soon see patches unifying the data structures used, in some cases (vty, ctrl) they are required singled out. Without these functions, the formatting ("%0*u", mnc_3_digits ? 3 : 2, mnc) would be duplicated all over our diverse repositories. In various log output, include the leading MNC zeros. Mark one TODO in card_fs_sim.c, I am not sure how to communicate a leading zero to/from a SIM card FS. The focus here is on the core network / BSS. To indicate ABI incompatibility, bump libosmogsm and libosmogb LIBVERSIONs; adjust debian files accordingly. Implementation choices: - The default behavior upon zero-initialization will be the mnc_3_digits flag set to false, which yields exactly the previous behavior. - I decided against packing the mnc with the mnc_3_digits field into a sub-struct because it would immediately break all builds of dependent projects: it would require immediate merging of numerous patches in other repositories, and it would make compiling older code against a newer libosmocore unneccessarily hard. Change-Id: Id2240f7f518494c9df6c8bda52c0d5092f90f221
* Use existing function for TLLI encodingMax2018-01-082-15/+5
| | | | | | Use bssgp_msgb_tlli_put() instead of copy-pasted code. Change-Id: I06d60566a19dcae701f8648c19fbd8db6d586f77
* Add function to properly encode RAIMax2018-01-083-26/+22
| | | | | | | | | | | | | Add gsm48_encode_ra() which takes appropriate struct as [out] parameter instead of generic buffer. Using uint8_t buffer instead of proper struct type prooved to be error-prone - see Coverity CID57877, CID57876. Old gsm48_construct_ra() is made into tiny wrapper around new function. The test output is adjusted because of the change in function return value which was constant and hence ignored anyway. Related: OS#1640 Change-Id: I31f9605277f4945f207c2c44ff82e62399f8db74
* gprs_bssgp: bssgp_fc_in(): fix mem leak on queue overflowNeels Hofmeyr2017-11-201-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All successful and all error code paths of bssgp_fc_in() free the msgb, except the code path calling fc_enqueue() when the msg is dropped (due to queue being full, or failure to allocate). Callers could theoretically catch the -ENOSPC return value and discard the msgb. However, in other code paths, a callback's return value is returned, which is expected to free the msgb, so such callback would have to never return -ENOSPC when it freed the msgb. Much simpler semantics would be to free the msgb in every code path, no matter which kind of error occurred. Who is currently calling bssgp_fc_in and how do they handle the return value? - bssgp_fc_test.c ignores the return value (and hits a mem leak aka sanitizer build failure if the queue is full). - fc_timer_cb() ignores the return value. - bssgp_tx_dl_ud() returns the bssgp_fc_in() rc. - which is returned by a cascade of functions leading up to being returned, for example, by gprs_llgmm_reset(), which is usually called with ignored return code. At this point it is already fairly clear that bssgp_fc_in() should always free the msgb, since the callers don't seem to distinguish even between error or success, let alone between -ENOSPC or other errors. bssgp_fc_test: assert that no msgbs remain unfreed after the tests. Adjust expected results. Helps fix sanitizer build on debian 9. Change-Id: I00c62a104baeaad6a85883c380259c469aebf0df
* Fix/Update copyright notices; Add SPDX annotationHarald Welte2017-11-138-3/+21
| | | | | | | | Let's fix some erroneous/accidential references to wrong license, update copyright information where applicable and introduce a SPDX-License-Identifier to all files. Change-Id: I39af26c6aaaf5c926966391f6565fc5936be21af
* Move additional libraries to appropriate placeMax2017-10-301-2/+2
| | | | | | | | | | | | | According to https://www.gnu.org/software/automake/manual/automake.html#Libtool-Flags the libraries supposed to be added to *_LDADD or *_LIBADD while *_LDFLAGS should contain additional libtool linking flags. Previously we used both. Let's unify this and move all the libraries into proper automake variable. While at it - also add libosmocore.la for tests to LDADD since all the tests link against it anyway. Change-Id: Ia657a66db75df831421af5df1175a992da5ba80f
* Tag/Release version 0.10.0Harald Welte2017-10-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's been way too long since the last release. Almost one year and 468 commits. A brief summary of the changes below: * Doxygen for libosmo{coding,gb} * pseudotalloc for embedded builds, jenkins for arm-none-gnueabi * --disable-doxygen, --disable-ctrl, --disable-simd * update debian packaging * gsm0503 coding routines * osmo_hton[sl] * statistics.h -> counter.h * QCDIAG in gsmtap * llist_{first,last}_entry() * llist_count() * LOGPSRC() macro * msgb_pull_to_l2() * msgb_printf() * prbs * osmo_sock_init2() * osmo_sock_mcast_{name,loop_set,ttl_set,all_set,subscribe,ip}() * OSMO_STRINGIFY() * OSMO_VALUE_STRING() * OSMO_BYTES_FOR_BITS() * osmo_talloc_asprintf() * osmo_sub_auth_type_name() * osmo_sub_auth_data support for IND/SQN_MS * osmo_fsm ctrl interface * ctrl_handle_alloc2() * ctrl_interface_setup_dynip2() * OSMO_CTRL_PORT_HLR * bssgp_tx_bvc_ptp_reset() * gprs_ns_inst connect/remote_{ip,port} * osmo_gprs_{ul,dl}_block_size_{bits,bytes}() * osmo_gprs_{dl,ul}_cs_by_block_bytes() * gprs_ns_pdu_strings[] * more BSSGP cause values * abis_nm_admin_name() * AoIP support in gsm0808 * gsm_fn_as_gsmtime_str() * osmo_dump_gsmtime() * gsup charging support * ipa_ccm_make_id_resp() * ipa_ccm_make_id_resp_from_req() * struct gsm48_gprs_susp_req * gsm_04_14.h * rsl measurement preprocessing related IEs * abis_nm_event_cause_names[] * abis_nm_sw_desc and friends * more SYSINFO_TYPE_ values * osmo_earfcn_bit_size_ext() * t16lv_put() * msgb_t16lv_put() * tlvp_val16be() * tlvp_val32be() * osmo_tlvp_copy() * osmo_tlvp_merge() * many additional VTY nodes * cmd_node.name member * bitvec_set_u64() * bitvec_rl_curbit * ctrl_lookup_register() * osmo_fsm_find_by_name() * osmo_fsm_inst_find_by_name() * osmo_fsm_inst_find_by_id() Change-Id: Ieb5db2e910a90db780ea058b3280f2facbd68d76
* GPRS: constify NS printing routine parametersMax2017-10-242-3/+3
| | | | Change-Id: I549ab7c26ac1489e01f281594bafe44b0681dc83
* GPRS: add vty command to show only persistent NSMax2017-10-241-8/+23
| | | | | | | | | | | The regular 'sh ns' lists all available NS. Sometimes it's handy to know which of those are persistent. * add "show ns persistent" command * adjust parameters of dump-ns*() functions to use bool where appropriate Change-Id: Ib812864bae3ea414cc107a7b4f49bea4e6161795
* Convert lib-internal rate_ctr from '.' separator to ':' separatorHarald Welte2017-10-242-12/+12
| | | | | | | | The rate_ctr.c code would do this mangling automatically, but let's avoid using this from new versions of our code for simplicity/explicitness. Change-Id: I24a556f447cfac25efb6e83cac2d0c2972d98fe3
* GPRS: check and report local address used for NSEMax2017-10-241-7/+13
| | | | | | | | | | When dumping NSE via vty: * check which local address would be used to communicate with a given NSE and print it * print link layer type last to make output more consistent Change-Id: I6932a29c7899d36bcc275f05dda9670b0e69bef0 Related: SYS#3610
* GPRS: clarify ip/frgre union useMax2017-10-242-9/+20
| | | | | | | | | * add comment about underlying assumption that structs in ip/frgre union members in gprs_nsvc struct have the same memory layout * remove such assumption from gprs_ns_ll_str() * use gprs_ns_ll_str() for NSE dump Change-Id: Idcb912b7b3f7460fd2b058e16650c0bde8f757ee
* GPRS: wrap NS state assignment in macroMax2017-10-241-14/+35
| | | | | | | | This enables logging for every state transition which makes NS troubleshooting easier. Change-Id: I5d6eaef0432d9be810bf93d07e40787b9ca59142 Related: SYS#3610
* GPRS: unify NS state printingMax2017-10-241-4/+4
| | | | | | | | | * introduce defines with NS state names * use them for vty and tests * expand test output to print complete NS state Change-Id: I69f8d536135ae76dbca623c2f1ffba625adcb1e9 Related: SYS#3610
* gb: optionally allow nsip packets only from a specific hostPhilipp Maier2017-10-241-3/+25
| | | | | | | | | | | | | | When listening for nsip connections is enabled, then every remote host may send packets. This is useful for an SGSN that serves multiple PCUs, but contraproductive for a PCU that awaits packets from a single SGSN. Add struct members remote_ip, and remote_port to struct gprs_ns_inst, when set, then the listening end uses connect() to ensure that only the expected host may send packets. Related: OS#2401 Change-Id: Ifeb201d9006eec275a46708007ff342cdfc14e45
* GPRS: log NS socketMax2017-10-231-0/+1
| | | | | | | Let's log NS UDP socket creation similar to the way we log it for telnet and ctrl interfaces. Change-Id: Ic9d0f94ab2c1bb33f67cd4f1c9236b64108c0bb6
* GPRS: print remote state info for NS peerMax2017-10-201-3/+5
| | | | | Change-Id: I1714c68909507eae6ef2933661a085859aca3b54 Related: SYS#3610
* vty: install 'exit', 'end',... commands on *all* nodesNeels Hofmeyr2017-09-272-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In many callers of the VTY API, we are lacking the vty_install_default() step at certain node levels. This creates nodes that lack the 'exit' command, and hence the only way to exit such a node is to restart the telnet session. Historically, the VTY looked for missing commands on the immediate parent node, and hence possibly found the parent's 'exit' command when the local node was missing it. That is why we so far did not notice the missing default commands. Furthermore, some callers call install_default() instead of vty_install_default(). Only vty_install_default() also includes the 'exit' and 'end' commands. There is no reason why there are two sets of default commands. To end this confusion, to catch all missing 'exit' commands and to prevent this from re-appearing in the future, simply *always* install all default commands implicitly when calling install_node(). In cmd_init(), there are some top-level nodes that apparently do not want the default commands installed. Keep those the way they are, by changing the invocation to new install_node_bare() ({VIEW,AUTH,AUTH_ENABLE}_NODE). Make both install_default() and vty_install_default() no-ops so that users of the API may still call them without harm. Do not yet deprecate yet, which follows in Icf5d83f641e838cebcccc635a043e94ba352abff. Drop all invocations to these two functions found in libosmocore. Change-Id: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
* gb: drop special vty exit commands, use vty_install_default()Neels Hofmeyr2017-09-274-43/+2
| | | | | | | | | | | | | | | L_NS_NODE and L_BSSGP_NODE had specialized 'exit' and 'end' vty commands, but all they do is return to the CONFIG and ENABLE_NODEs like the default 'exit' and 'end' commands. Drop them and use the default 'exit' and 'end' cmds. Examining BSSGP and NS node behavior in osmo-sgsn exhibited identical list and exit/end behavior before and after this patch. Prepares for an upcoming commit incorporating vty_install_default() into install_node(), see I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b: this patch changes to the default commands, the upcoming change implies them. Change-Id: I5b0de066b4249d482c22620d5b1bcb03f381293c
* vty: fix style: bssgp node vty promptNeels Hofmeyr2017-09-271-1/+1
| | | | | | | Add trailing space and 'config-' prefix to match our common VTY node prompt style. Change-Id: I88db128cad9fcc6e53326b4aed5d06ea9102f328
* BSSGP: add function to reset all PTP BVCMax2017-07-282-0/+27
| | | | | Change-Id: I9bf8f4dd784ccddbb9926492a85fff3293a0e913 Related: OS#1638
* Add missing BSSGP cause valuesMax2017-07-011-20/+57
| | | | | | Add values from 3GPP TS 48.018 Change-Id: Ie39a6c91a46d179392d861805a106743a07c6fb0
* BSSGP: handle BVC-RESET-ACKMax2017-06-281-0/+3
| | | | | | | | | | | | | That's necessary for SGSN to properly handle BSS response to reset procedure initiated by SGSN (foe example via 'bssgp bvc nsei 101 bvci 0 reset' command). According to 3GPP TS 48.018 §8.4 "after performing the BVC Reset procedure all affected BVCs are assumed to be unblocked at the SGSN" so there's no need in any special handling. Change-Id: I90dfbd0195a8403406429ccc746299d072445f7b Related: OS#1638
* doxygen: unify use of \file across the boardNeels Hofmeyr2017-06-239-51/+58
| | | | | | | | | | | | | | | | | Considering the various styles and implications found in the sources, edit scores of files to follow the same API doc guidelines around the doxygen grouping and the \file tag. Many files now show a short description in the generated API doc that was so far only available as C comment. The guidelines and reasoning behind it is documented at https://osmocom.org/projects/cellular-infrastructure/wiki/Guidelines_for_API_documentation In some instances, remove file comments and add to the corresponding group instead, to be shared among several files (e.g. bitvec). Change-Id: Ifa70e77e90462b5eb2b0457c70fd25275910c72b
* doxygen: enable AUTOBRIEF, drop \briefNeels Hofmeyr2017-06-232-33/+33
| | | | | | | | | | Especially for short descriptions, it is annoying to have to type \brief for every single API doc. Drop all \brief and enable the AUTOBRIEF feature of doxygen, which always takes the first sentence of an API doc as the brief description. Change-Id: I11a8a821b065a128108641a2a63fb5a2b1916e87
* gb/gprs_bssgp.c: avoid valueless goto usageVadim Yanitskiy2017-06-131-10/+3
| | | | Change-Id: I0c2aaf1ab462c923d62232f1a63fae1e4eb18b4d
* update/extend doxygen documentationHarald Welte2017-06-121-1/+1
| | | | | | | | | It's a pity that even with this patch we still are fare away from having the whole API documented. However, at least we have a more solid foundation. Updates not only extend the documentation, but also make sure it is rendered properly in the doxygen HTML. Change-Id: I1344bd1a6869fb00de7c1899a8db93bba9bafce3
* Add human-readable names for signal_nsMax2017-05-242-0/+11
| | | | | Change-Id: Id664355eb8305fb287e4dae0800fb20dc2f9b8cd Related: SYS#3610
* libosmogb: Convert to use new endian conversion helpersHarald Welte2017-05-156-96/+91
| | | | Change-Id: I5ed17702cd9487e1cab6bae39802aa11fb6a37b0
* timer: add osmo_timer_setup()Pablo Neira Ayuso2017-05-092-4/+2
| | | | | | | | | | | | | | | Add a new function timer function to set up the timer, similar to what we have in the Linux kernel. This patch also converts existing opencoded timer setup in the libosmocore tree as initial client of this new function. This patch implicitly removes function callback passed by reference that defeat compile time type validation. Compile-tested only, but I ran make check that reports success when testing timer infrastructure. Change-Id: I2fa49972ecaab3748b25168b26d92034e9145666
* gprs: add value strings for NS PDU typeMax2017-05-092-2/+27
| | | | | | | | Add value strings for Service Control PDUs according to 3GPP TS 48.016 §9 and use them for logging. Change-Id: I0ea3a45f35d68619d4cfa9735ef77abd9f9f0d58 Related: SYS#3610
* fix spelling in API docu, command reply, logging, descriptionsThorsten Alteholz2017-04-231-1/+1
| | | | | | sections: ctrl, gb, gsm, vty Change-Id: Iac211b5cd8504da36b699777b95a2448dd7c3e70
* logging.h: fixup: shorter names for LOGGING_FILTER_* and LOGGING_CTX_*Neels Hofmeyr2017-02-235-33/+33
| | | | | | | | | | | | | | | My recent logging patch was merged to master a bit too soon. Accomodate the request for naming that matches the general "LOG" prefix instead of "LOGGING". libosmocore will not be backwards-compatible with the few commits from change-id I5c343630020f4b108099696fd96c2111614c8067 up to this one. This and following commits are backwards compatible with those before that short window. See also: * openbsc change-id Ib2ec5e4884aa90f48051ee2f832af557aa525991 * osmo-pcu change-id I4db4a668f2be07f3d55f848d38d1b490d8a7a685 Change-Id: I424fe3f12ea620338902b2bb8230544bde3f1a93
* logging: centrally define ctx and filter indexesNeels Hofmeyr2017-02-226-39/+33
| | | | | | | | | | | | | | | | | | | | | | | It is too easy for calling code to use the same filter and context indexes for different filters and structs. For example, openbsc's IMSI filter and libgb's GPRS_BVC filter both fall on index 1 even though there are plenty more indexes to choose from. To alleviate this, have one central definition here, sort of like ports.h does for VTY and CTRL port numbers. Add static asserts to make sure the indexes fit in the available array and bit mask space. Calling code like openbsc.git and osmo-pcu need adjustments and/or should move to using these enum values instead of their local definitions. Taking this opportunity to also prepare for a split of struct gsm_subscriber in openbsc into bsc_subsciber and vlr_subscriber with appropriate separate filter index constants for both subscriber types. Include previous LOG_FILTER_ALL in the LOGGING_FILTER_* enum, and replace its use by (1 << LOGGING_FILTER_ALL). Change-Id: I5c343630020f4b108099696fd96c2111614c8067
* fix: gprs_bssgp_vty: logging filter: wrong constantNeels Hofmeyr2017-02-171-1/+1
| | | | | | | Setting the BVC log filter to NULL worked only if the NSVC filter was set, use the proper constant instead. Change-Id: Ic1cc268ed20700698c93d3ff8bf85cc0f01d3b1b
* gprs_ns_vty: guard against duplicate VTY elementsNeels Hofmeyr2017-01-121-0/+8
| | | | | | | | The TbfTest in osmo-pcu calls gprs_ns_vty_init() repeatedly, which aborts because of duplicate VTY elements. Fix this by skipping the VTY init if it already happened. Change-Id: I05c7f25a4e873ae76b206819180b8b043b60103e
* bssgp_rx_paging(): Fix parsing of P-TMSI IE in Paging messageHarald Welte2016-11-111-1/+2
| | | | | | | | | | | | | | | | | | | | | This was actually discovered by the following compiler warning in gcc-6.2.0: CC gprs_bssgp_bss.lo gprs_bssgp_bss.c: In function ‘bssgp_rx_paging’: gprs_bssgp_bss.c:544:2: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation] if (TLVP_PRESENT(&tp, BSSGP_IE_TMSI) && ^~ gprs_bssgp_bss.c:548:3: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’ *(pinfo->ptmsi) = ntohl(*(uint32_t *) ^ This is an actual bug. If we recevied a BSSGP Paging Request without P-TMSI, we might crash or report some random memory as P-TMSI to the caller in the output data structure. Change-Id: Ib4f307827cd7cccc91c1415a6fb5428d7cf8416d
* bssgp_vty: Remove dead code and compiler warningHarald Welte2016-11-111-7/+0
| | | | | | | | gprs_bssgp_vty.c:48:34: warning: ‘gprs_bssgp_timer_strs’ defined but not used [-Wunused-const-variable=] static const struct value_string gprs_bssgp_timer_strs[] = { ^~~~~~~~~~~~~~~~~~~~~ Change-Id: Ia41ccb7b227c41996cdef51dc6779bfc5b5a8d48
* add osmo_gettimeofday as a shim around gettimeofdayNeels Hofmeyr2016-09-222-6/+6
| | | | | | | This allows feeding a custom time for unit tests by overriding osmo_gettimeofday. Change-Id: Ic7a81a6eb51f27fe452962b91f2eae2070d87089
* Fix unaligned access found by addr. sanitizerMax2016-04-242-4/+4
| | | | | | | | gprs_bssgp.c:461:9: runtime error: load of misaligned address 0x62100001a66b for type 'uint32_t', which requires 4 byte alignment gprs_ns.c:937:16: runtime error: load of misaligned address 0x61d00002a97f for type 'uint16_t', which requires 2 byte alignment
* gb: Add bssgp_pdu_str to libosmogb namespaceMax2016-04-121-0/+1
| | | | [hfreyther: To be used by osmo-pcu]
* Add missing docs for bssgp bvc reset vty commandMax2016-04-071-2/+8
| | | | Fixes the build failure with extended tests enabled.
* Add vty command to explicitly reset given BVCIMax2016-04-051-0/+20
| | | | | It's useful for debugging and is similar to existing reset command for nsvc.
* Improve BSSGP debug outputMax2016-03-172-17/+17
| | | | | Print string representation of Cause IE and PDU type instead of numerical value.
* Add helper function to convert numerical BSSGP PDU type to stringMax2016-03-111-0/+46
|
* gb: Add bssgp_msgb_copy functionJacob Erlbeck2016-02-222-0/+31
| | | | | | | | | | | | | | This function originates from openbsc/src/gprs but is just specific to BSSGP/Gb on the same level like bssgp_msgb_alloc. This commit puts the former gprs_msgb_copy function beside bssgp_msgb_alloc. Renamed function: gp