summaryrefslogtreecommitdiffstats
path: root/include/osmocom/gsm
Commit message (Collapse)AuthorAgeFilesLines
* GSUP: rename E_ROUTING_ERROR to ROUTING_ERRORNeels Hofmeyr2019-11-241-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | GSUP routing was introduced when adding the E interface. Hence that was the first realm where routing errors could occur. I did notice back then that this message type was special: it does not convey a response to a particular message kind -- it does not make sense, for example, to return an Updating Location Error cause, and do that for all conceivable message types. Instead, this tells the sender that a deeper error exists, i.e. that the desired peer is completely gone and unreachable. I did not foresee though that for D-GSM, there would also be arbitrary GSUP proxy routing, and that this error is not limited to E interface semantics. From today's point of view, adding the "_E_" in the name was a mistake. Remove that "_E_" to yield OSMO_GSUP_MSGT_ROUTING_ERROR (with unchanged message type discriminator), but provide a #define linking the old name OSMO_GSUP_MSGT_E_ROUTING_ERROR to the new one. The only visible change should be that osmo_gsup_message_type_names[] now returns the new name without "_E_". I am not aware of any regression test fallout from that. Change-Id: Ic8e8bd11522d6c51ac7aaf946516cbce26bc6e1e
* gsm: gsm_04_08.h: Allow accessing classmark2 as struct instead of uint32_tPau Espin Pedrol2019-11-041-5/+28
| | | | | | | New fields are put inside a union to keep backward compatibility with potential older users of the struct. Change-Id: I235635800c0de47b1e2b9ec9c7191418f6003554
* gsm: gsm_utils: Fix return type of API ms_class_gmsk_dbm() and add unit testsPau Espin Pedrol2019-11-041-2/+1
| | | | | | | | Only known user of API is in osmocom-bb and it compiles fine after the change. Related: OS#4244 Change-Id: Ia10345008b3aca50b30482ef3b852b03eca71995
* gsm: Fix compilation error under some compilersPau Espin Pedrol2019-11-042-2/+2
| | | | | | | | | | | | | | Some compilers don't like declaration of enums in header files like we do sometimes for structs: enum gsm_band; void foobar(enum gsm_band band); triggers: error: use of enum 'gsm_band' without previous declaration Fixes: b99f4ca2d8517d99cdf8aa183dbfda7b233bb781 Related: OS#4244 Change-Id: I6c2102c763f565bbe3c8dd7e5b4e04c4a45fff67
* gsm_04_08.h: Introduce API osmo_gsm48_rfpowercap2powerclass()Pau Espin Pedrol2019-11-031-1/+2
| | | | | Related: OS#4244 Change-Id: I32e9cc1c2397b44f0d48db2acdf782a821365b63
* cosmetic: gsm_04_08.h: Fix trailing whitespacePau Espin Pedrol2019-11-011-3/+3
| | | | Change-Id: I4b34dbd5f0176d1d8aa8cc96f642ed35d4214b7e
* gsm0508: add functions to calculate beginning of a blockPhilipp Maier2019-10-281-0/+12
| | | | | | | | | | | The calculation of the beginning of a block for TCH/F, TCH/H and FACCH can be challenging since those channels are affected by the diagonal interleaving of the TCH channels. However, GSM 05.02 Section 7 Table 1 of 5 specifies how the blocks are distributed over the TDMA frame interval. Lets add a mapping function that is based on that table Related: OS#3803 Change-Id: I3d71c66f8c401f5afbad9b1c86c24580dab9e0ce
* API doc tweaks (mncc.h, gsm_08_08.h)Neels Hofmeyr2019-10-042-5/+7
| | | | Change-Id: I9b4c7e737c83c65e358496e4540c14be5abc5474
* gsup: add OSMO_GSUP_SUPPORTED_RAT_TYPES_IE and OSMO_GSUP_CURRENT_RAT_TYPE_IENeels Hofmeyr2019-09-281-0/+7
| | | | | | | | | | | | | | OSMO_GSUP_SUPPORTED_RAT_TYPES_IE corresponds to the Supported RAT Types Indicator from 3GPP TS 29.002. See 8.1.2 MAP_UPDATE_LOCATION service, which indicates the capabilities of the MSC/VLR to the HLR. So far, have room for eight RAT types in the gsup_msg. That is an arbitrary random choice without any rationale. OSMO_GSUP_CURRENT_RAT_TYPE_IE is useful to communicate the currently used RAN / RAT type of the current subscriber during Location Updating Request. Change-Id: I93850710ab55a605bf61b95063a69682a2899bb1
* Introduce BTS_FEAT_ETWS_PN for communicating ETWS PN capabilityHarald Welte2019-09-051-0/+1
| | | | | | | | | | As 3GPP doesn't specify how the BSC shall communicate ETWS Primary Notifications over Abis/RSL, we have to use a vendor-specific RSL message for this. And in order to know if the peer supports this feature, we introduces BTS_FEAT_ETWS_PN. Change-Id: I89c24a81ada6627694a9632e87485a61cbd3e680 Related: OS#4046, OS#4047
* gsm_08_58: Add vendor-specific Message Type for ETWS Primary WarningHarald Welte2019-09-051-0/+2
| | | | | Change-Id: I36fc2ffc22728887d1cb8768c7fcd9739a8ec0fc Related: OS#4046, OS#4047
* cbsp: Fix endless loop iteration when decoding cell list IEsHarald Welte2019-08-311-0/+1
| | | | | | | | The CBSP code assumed that gsm0808_decode_cell_id_u() would return the number of bytes it has consumed/parsed. But it actually always returns '0', whcih makes us run in an endless loop :( Change-Id: I5758af4ec11a827d4b888a3a16c4ec22de90a7d6
* Cosmetic: l1sap.h: change /* !< to /*!<Oliver Smith2019-08-231-5/+5
| | | | Change-Id: Icaec95a9c6105fd17bc1151fdc77394f4efd3b70
* gsm/gsm48.h: drop meaningless 'const' from gsm48_mi_to_string()Vadim Yanitskiy2019-07-261-2/+1
| | | | Change-Id: I5eb17edadf89ac47b4ca86c9e822037f7c0e518e
* Add Cell Broadcast related definitions from 3GPP TS 23.041Harald Welte2019-07-201-0/+89
| | | | Change-Id: I1e2c62cb9047648907c91b99f764f6caba8f4493
* cbsp: Introduce osmo_cbsp_errstrHarald Welte2019-07-201-0/+2
| | | | | | | | | | | | | | Rather than having the encoder/decoder library print some log messages in case of encoding/decoding errors, let's provide something akin to 'errno', but with a string instead of a numeric error code. The 'osmo_cbsp_errstr' global variable (if set) contains a human-readable string describing the most recent encoding/decoding error. It exists separately for each thread and hence can be used safely in multi-threaded environments. Change-Id: Id9a5a595a76ba278647aee9470ded213d8464103
* CBSP (Cell Broadcast Service Protocol; 3GPP TS 48.049) supportHarald Welte2019-07-202-0/+420
| | | | | | | | | | This introduces definitions as well as a parser+encoder for the Cell Broadcast Service Protocol (CBSP) as specified in 3GPP TS 48.049. CBSP is used on the interface between CBC and BSC. Related: OS#3537 Change-Id: I5b7ae08f67e415967b60ac4b824db9e22ca00935
* libosmogsm/l1sap.h: extend ph_rach_ind_param with lqual_cbVadim Yanitskiy2019-07-101-0/+1
| | | | | | | | | | | | The link quality, defined by C/I (Carrier-to-Interference) ratio, can be computed from the training sequence of each burst, where we can compare the "ideal" training sequence with the actual training sequence and then express that in cB (centiBels, dB * 10). By analogy with both RSSI and ToA, it can be used to filter out false-positive detections and ghost Access Bursts. Change-Id: Ie2a66ebd040b61d6daf49e04bf8a84d3d64764ee
* add define for magic tmsi constantEric Wild2019-06-171-0/+1
| | | | Change-Id: I52b9f6b5f3e96d85a390ba2af21d7814df8aaeec
* protocol/gsm_04_08.h: do not check if unsigned is positiveVadim Yanitskiy2019-06-121-3/+3
| | | | Change-Id: I6b486b52a3733d5fd5e8ba18acbc9374e2e8bd7e
* lapdm: Allow user to specify T200 values; Use correct N200 valuesHarald Welte2019-06-051-3/+9
| | | | | | | | | | | | | | | | | | TS 04.06 specifies a N200 re-transmission counter that depends on the channel type, which we didn't care about at all so far. Let's have the caller tell us the channel type so we can internally look up the correct N200 value for it. At the same time, permit the user to specify T200 re-transmission timer values for each SAPI on both DCCH and ACCH, which is required at least in the BTS as per GSM TS 12.21. Also, extend the timer resolution of the API from seconds to milli-seconds, which is more applicable as particularly on the FACCH the recommended values are in the 200ms range. Change-Id: I90fdc4dd4720d4e02213197c894eb0a55a39158c Related: OS#3906 Related: OS#2294 Related: OS#4037
* gsm0808_utils: Add gsm0808_decode_cell_id_u()Harald Welte2019-06-041-0/+1
| | | | | | | | | This function parses a single Cell ID list element into a 'union gsm0808_cell_id_u'. This function is going to be used by the upcoming CBSP support. Related: OS#3537 Change-Id: I08b33881667aa32f01e53ccb70d44d5b79c7c986
* rest_octets: Remove SI2ter + SI2bis encoders that don't do anythingHarald Welte2019-05-281-2/+0
| | | | | | | | The library should either provide functions that implement encoding of those rest octets, or it shouldn't. Providing a function that doesn't do anything but pad the buffer is useless. Change-Id: Ie10684de6a6b2663e2a871fcdb2b275b6ad7a1e7
* rest_octets: Implement actual SI6 rest octets encodingHarald Welte2019-05-281-1/+38
| | | | | | | | | There's very little sense behind introducing a function into libosmogsm which doesn't implement 90% of the spec. Let's allow the caller to provide the various optional bits of information to the encoder, rather than generating mostly static SI6 rest octets. Change-Id: Id75005a0c4a02ce7f809692d58b3bd226bc582b2
* rest_octets: Add function to parse SI3 rest octetsHarald Welte2019-05-281-0/+3
| | | | | | Change-Id: I690cf308311f910005a325d50f5d5d825678d2b2 Related: OS#3075 Related: OS#4023
* rest_octets: Suffix encoder functiosn with _encodeHarald Welte2019-05-281-10/+12
| | | | | | ... otherwise it's not really clear what they do. Change-Id: I08e0ca9a8d13c7aa40b9d90f34f0e13adb87d4e0
* oap_client: Fix license: GPLv2+ instead of AGPLv3+Harald Welte2019-05-271-4/+5
| | | | | | | | | | | | libosmo{core,gsm,vty} code is GPLv2+. The OAP code originated in osmo-msc.git and was moved here without changing the license. That was a mistake, it always was meant to be under GPLv2-or-later after moving to libosmocore.git. Copyright is with sysmocom, so I as the managing director can approve the license change. Change-Id: I08311fa8214c15f8df8945b9894226608cf96f15
* rsl: Add osmocom-specific extensions to RSL channel numbers for CBCHHarald Welte2019-05-271-0/+4
| | | | | | | | | | | We don't really *need* it in libosmocore as such, but the lack of having all osmocom extensions listed here lead to using overlapping definitions: 0x18 was used for dynamic PDCH on the Abis side, but also for CBCH on the L1SAP side. Let's list them all here to increase visibility in case anyone wants to extend this further... Related: OS#4027 Change-Id: I93e557358cf1c1b622f77f906959df7ca6d5cb12
* protocol/gsm_12_21.h: fix copy-pasted struct descriptionVadim Yanitskiy2019-05-241-1/+1
| | | | Change-Id: Ic6d32c886f6f8f859e382d48f9e1b509000db9ba
* TLV: Add one-shot TLV encoderHarald Welte2019-05-191-0/+6
| | | | | | | | | | | | | | | | | So far, the TLV code contained two types of functions * tlp_parse() to parse all TLVs according to definition into tlvp_parsed * various helper functions to encode individual TLVs during message generation This patch implements the inverse of tlv_parse(): tlv_encode(), which takes a full 'struct tlv_pared' and encodes all IEs found in it. The order of IEs is in numerically ascending order of the tag. As many protocols have different IE/TLV ordering requirements, let's add a tlv_encode_ordered() function where the caller can specify the TLV ordering during the one-shot encode. Change-Id: I761a30bf20355a9f80a4a8e0c60b0b0f78515efe
* Cosmetic: GSUP: fix too long comment lineOliver Smith2019-05-191-2/+2
| | | | Change-Id: I60ba8fef8924e58bc73cff5c7ff77ebb76d8bfaa
* Revert "Change GSM48_PDISC_* to enum type"Harald Welte2019-05-181-20/+18
| | | | | | | This reverts commit ece1d8509d5c5af7a60ab5e1a5dddade1b181dc9 which causes build failures due to compile warnings everywhere. Change-Id: Ic131439ea206a0b0f57968ef701667da73711b51
* Change GSM48_PDISC_* to enum typeMax2019-05-171-18/+20
| | | | | | | | An enum is more clear than an int and #defines for passing around, also in case you have a switch () statement, the compiler will issue warnings for unhandled cases. Change-Id: Icbbe8786a776081d7643193f154e6270224399e6
* gsm_23_003: add GSM23003_MSISDN_{MIN,MAX}_DIGITSOliver Smith2019-05-151-0/+3
| | | | | | | | | | | Add the constant, so it can be used in create-subscriber-on-demand related patches. ITU-T Rec. E.164 6.1 states that maximum international number length should be 15. I did not find a source for a minimum length, but I've added the constant and set it to 1 for consistency (based on the existing osmo_msisdn_str_valid() function). Related: OS#2542 Change-Id: Idc74f4d94ad44b9fc1b6d43178f5f33d551ebfb1
* gsm0808: Introduce Osmocom extensions to announce Osmux supportPau Espin Pedrol2019-05-132-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | IE GSM0808_IE_OSMO_OSMUX_SUPPORT (T, 1 byte) is sent in AoIP appended to BSSMAP RESET in order to announce the peer that its MGW supports handling Osmux streams upon call set up. IE GSM0808_IE_OSMO_OSMUX_CID (TV, T 1 byte & V 1 byte) is sent in AoIP during call set up: * MSC->BSC Assignment Request * BSC->MSC Assignemnt Complete The 1 byte value contains the local Osmux CID, aka the recvCID aka CID where the peer sending the Assign Req/Compl will look for Osmux frames on that call. Hence, the peer receiving this CID value must use it to send Osmux frames for that call. As a result, a given call leg BSC<->MSC can have one different Osmux CID per direction. For example: * MS => MGW_BSC ==CID 0==> MGW_MSC * MS <= MGW_BSC <=CID 1=== MGW_MSC This allows for setups with 256 call legs per BSC on scenarios where NAT is not a problem, where MSC can have a pool of 256 CID per MGW_BSC (or remote peer). Related: OS#2551 Change-Id: I28f83e2e32b9533c99e65ccc1562900ac2aec74e
* gsm0808_utils: Introduce gsm0808_msgb_put_cell_id_u()Harald Welte2019-05-101-0/+1
| | | | | | | | | | | | This function is doing the bulk work of encoding a given Cell ID List item. gsm0808_enc_cell_id_list2() is modified to be a wrapper / loop around the new function. The purpose of this is to expose Cell ID List Entry encoding so that the upcoming CBSP protocol encoder can re-use this code. Related: OS#3537 Change-Id: I6cc567798e20365e6587e6b2988e834306d8c80c
* Add MO-FALLBACK-VALUE SGsAP IEOmar Ramadan2019-05-101-0/+1
| | | | | | | In testing against a particular EPC, the SGsAP-SERVICE-REQUEST can contain a MO fallback value TLV with T 0xF1 Change-Id: Ia2460af9673818d375e28c67f1631b5f7eacdaeb
* Re-introduce declaration of gsm0808_create_handover_request_ack()Harald Welte2019-05-061-0/+4
| | | | | | | | | | | | | In Change-Id Ia71542ea37d4fd2c9fb9b40357db7aeb111ec576, the old declaration of gsm0808_create_handover_request_ack() was accidentially removed from the gsm0808.h header file. The actual function itself (and the exported symbol) remained for backwards compatibility at runtime, but removing the declaration from the header file resulted in build failures across the board of all automatic tests. Let's re-introduce the old declaration. Change-Id: I9e96fa675fccca9ee9631caad7559dea3794d490
* add gsm0808_create_handover_request_ack2 to add AoIP RTP addrNeels Hofmeyr2019-05-051-3/+23
| | | | | | | | | | | | | | | | | | | osmo-bsc so far omits the AoIP Transport Layer Address from its Handover Request Acknowledge message, which breaks inter-BSC Handover for AoIP. Allow fixing that. One quirk I really don't like about this: I would prefer to directly use struct sockaddr_storage as a member of the struct gsm0808_handover_request_ack. Even though struct sockaddr_storage appears in various function signatures, the gsm0808.c actually also gets built on embedded systems that lack arpa/inet.h (for me indicated by the ARM build job on jenkins). Compiling gsm0808.c works only because the actual coding of struct sockaddr_storage is implemented in gsm0808_util.c, which (apparently) does not get built on embedded and hence, even though there are undefined references to e.g. gsm0808_enc_aoip_trasp_addr() it works. Related: I4a5acdb2d4a0b947cc0c62067a67be88a3d467ff (osmo-bsc) Change-Id: Ia71542ea37d4fd2c9fb9b40357db7aeb111ec576
* add comment to gsm_mncc_bearer_cap.speech_verNeels Hofmeyr2019-05-031-1/+1
| | | | Change-Id: Ib657b1eb55aab400f3682a89bbd428bdee02581c
* add osmo_bssap_tlv_parse2() for multiple identical TNeels Hofmeyr2019-05-031-0/+3
| | | | | | | | | | | | | | | | In BSSMAP messages, at least the Cell Identifier IE can appear more than once. We have tlv_parse2() which allows decoding into an array of tlv_parsed to cleanly handle multiple occurences. Hence add osmo_bssap_tlv_parse2() which supports multiple occurences. An alternative would be to directly call tlv_parse2() with gsm0808_att_tlvdef() when multiple T occurences are needed, and I'm not really sure why osmo_bssap_tlv_parse() exists in the first place. But because it does, add a similar definition that is capable of handling multiple IEs with identical Tag discriminator. Change-Id: Ib9a2095f7498dc2cda2a57154b2dbe4621df72f8
* add gsm48_decode_bcd_number2() from osmo-mscNeels Hofmeyr2019-05-031-1/+5
| | | | | | | | | | | | gsm48_decode_bcd_number() is unable to provide proper bounds validation of input and output data, hence osmo-msc's vlr.c introduced a static decode_bcd_number_safe() a long time ago. Move to libosmocore. I need to use the same function to decode an MSISDN during inter-MSC Handover, instead of making it public in osmo-msc, rather deprecate the unsafe function and provide a safer version for all callers. Mark the old one deprecated. Change-Id: Idb6ae6e2f3bea11ad420dae14d021ac36d99e921
* BSSMAP: add messages for inter-BSC and inter-MSC HandoverNeels Hofmeyr2019-05-031-0/+66
| | | | Change-Id: I9dac375331f6bea744769e973725d58e35f87226
* gsm/gsm_utils.h: fix argument type of gsm_chan_t_name()Vadim Yanitskiy2019-05-021-1/+1
| | | | | | | | The actual value-string array 'gsm_chan_t_names' describes the enum values of 'gsm_chan_t', not 'gsm48_chan_mode'. Change-Id: Ifc2121b23fb8d07589cc5b7aa8fbf4e27eb6b72b Fixes: CID#188831, CID#188825
* BSSMAP: tweaksNeels Hofmeyr2019-04-261-2/+2
| | | | | | | | | | | | | Change two instances of Speech Version values to enum gsm0808_permitted_speech. It is often not trivial to find the right values for a uint8_t member, giving the enum name makes it a lot easier/safer to use. In gsm0808_create_handover_required(), use msgb_tv_put() so that the enum's storage size doesn't matter. (Already used for handover_performed) Fix typo in doc of gsm0808_create_handover_required(). Change-Id: I6387836bab76e1fa42daa0f42ab94fc14b70b112
* GSUP: add inter-MSC handover related msgs and IEsOliver Smith2019-04-261-0/+66
| | | | | | | | | | | | | | | | | | | | Based on a draft created by Neels, which is the result of reading a MAP trace of two MSCs negotiating inter-MSC handovers, and of reading the TS 29.002, TS 29.010 and related specs: https://lists.osmocom.org/pipermail/openbsc/2019-January/012653.html I figured out that the "Handover Number" mentioned in the specifications is the same as the MSISDN IE that we already have, so we can use that instead of creating a new IE (example usage in tests/gsup/gsup_test.c). Create a new OSMO_GSUP_MSGT_E_ROUTING_ERROR message type, which the GSUP server uses to tell a client that its message could not be forwarded to the destination (see [1]). MAP has no related message. [1]: Change-Id: Ia4f345abc877baaf0a8f73b8988e6514d9589bf5 (osmo-hlr.git) Related: OS#3774 Change-Id: Ic00b0601eacff6d72927cea51767801142ee75db
* GSUP: add Message Class IENeels Hofmeyr2019-04-131-0/+21
| | | | | | | | | | | | | | | | | | osmo-msc and osmo-hlr have distinct subsystems handling incoming GSUP messages. So far we decide entirely by message type which code path should handle a GSUP message. Thus no GSUP message type may be re-used across subsystems. If we add a GSUP message to indicate a routing error, it would have to be a distinct message type for subscriber management, another one for SMS, another one for USSD... To allow introducing common message types, introduce a GSUP Message Class IE. In the presence of this IE, GSUP handlers can trivially direct a received message to the right code path. If it is missing, handlers can fall back to the previous switch(message_type) method. Change-Id: Ic397a9f2c4a7224e47cab944c72e75ca5592efef
* add OSMO_IMSI_BUF_SIZENeels Hofmeyr2019-04-132-1/+4
| | | | | | | | | | | | Various places in our code base figure out how many chars they need to safely store an IMSI. An IMSI can have a checksum digit, which is not reflected by GSM23003_IMSI_MAX_DIGITS. And we usually need a terminating \0. Instead of having a magic +2 repeated every so often, rather define OSMO_IMSI_BUF_SIZE to contain both checksum digit and nul char, and have the explanatory comment with it here in libosmocore. Change-Id: Id11ada4c96b79f7f0ad58185ab7dbf24622fb770
* Add _c versions of functions that otherwise return static buffersHarald Welte2019-04-108-0/+20
| | | | | | | | | | | | | | We have a habit of returning static buffers from some functions, particularly when generating some kind of string values. This is convenient in terms of memory management, but it comes at the expense of not being thread-safe, and not allowing for two calls of the related function within one printf() statement. Let's introduce _c suffix versions of those functions where the caller passes in a talloc context from which the output buffer shall be allocated. Change-Id: I8481c19b68ff67cfa22abb93c405ebcfcb0ab19b
* gsm_03_40.h: define max SM-TP-UDL (User-Data-Length) valuesVadim Yanitskiy2019-04-091-0/+5
| | | | | | | As per 3GPP TS 03.40, section 9.2.3.16 "TP-User-Data-Length (TP-UDL)" field may contain up to 140 octets (or 140 * 8 / 7 = 160 septets). Change-Id: I54f88d2908ac47228813fb8c049f4264e5145241
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 06:13:18 +0000