summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* MNCC: Add MNCC to string dumperHarald Welte2018-01-194-1/+429
| | | | | | | | As MNCC is rather hard to debug (wireshark cannot trace UNIX domain sockets), let's add our own decoder that we can use from related debug log statements in the respective programs. Change-Id: I216aaf70868ba5f3860a60c4b2442957531a3011
* logging vty: add 'logging print file (0|1|basename)' cmdNeels Hofmeyr2018-01-191-0/+27
| | | | | | | Add a VTY command that allows configuring the output of source filename. So far, this was not configurable by VTY at all. Change-Id: If1bd79026a3c680ccf7587d545d12f7759a998fc
* logging: allow to log only the basename of each sourceNeels Hofmeyr2018-01-192-0/+15
| | | | | | | | | | | In the C API, add another enum log_file_type value, and when set print only the basename of the source file path. Rationale: especially when not building directly in the source dir, the paths to the source files can become rather long. Usually, just the basename of the file is sufficient to identify the source line. Change-Id: If3e4d5fb2066f8bf86e59c82d1752b1a843cf58e
* logging: separate the '<000b>' subsys from filename loggingNeels Hofmeyr2018-01-193-7/+74
| | | | | | | | | | | | | | | | | | | Add a separate flag and API to switch the category-in-hex output: log_set_print_category_hex(). Add log_set_print_filename2() to modify only the print_filename flag. The old log_set_print_filename() function still affects both flags. Explain the rationale in the comment for log_set_print_filename(). There is no need to deprecate log_set_print_filename(); it might cause compiler warnings and break strict builds unnecessarily. Add VTY command 'logging print category-hex (0|1)'. Since there is no VTY command to switch filename output, nothing needs to be adjusted there (a command will be added in a subsequent patch). Change-Id: Iba03a2b7915853c6dccaf6c393c31405320538b4
* jenkins: add dispatcher scriptMax2018-01-183-0/+94
| | | | | | | | | | | | Similar to the way we test osmo-bts, add simple dispatcher script which calls appropriate test depending on a given parameter. This will allow to simplify the job description. While at it, also rename jenkins-arm.sh -> jenkins_arm.sh to match the OsmoBTS. The older scripts are preserved for compatibility and shall be removed once we update job description in osmo-ci. Change-Id: I2955e866bce4f000a53369bd601a346c36c82468
* cosmetic: logging: if color is disabled, don't print ""Neels Hofmeyr2018-01-171-5/+6
| | | | | | | | | | | | If color output is disabled, skip the empty snprintf() to (not) clear the ANSI color. Also, no need to use a format string of "%s", just pass the string constant directly. That is a micro optimisation as well as clarification of the code. Change-Id: Ie7cb06de160830d2f8ee5718246c0fe311f68d49
* fsm: fix double llist_del in osmo_fsm_inst_term()Philipp Maier2018-01-171-2/+3
| | | | | | | | | | | llist_del(&fi->proc.child) is executed always, regardless whether a parent is configured or not. This may lead into a double llist_del when the child has been previously unlinked. - check if fi->proc.parent is set, and only then execute llist_del(&fi->proc.child); Change-Id: I4b33d508c8a11b72fbf30125088a882894d9e6ac
* fix -Werror build: logging.c: always use literal with snprintfNeels Hofmeyr2018-01-171-1/+1
| | | | | | | | | | | | | | | | | | A recent commit added an snprintf that passes a pointer to a literal directly to snprintf. Since passing pointers to printf formats is a vulnerability in case user supplied data may be passed in the format, modern compilers warn against that, which breaks our -Werror builds. Even though this is just a pointer to a literal, it needs to be an actual literal to make compilers happy. Use printf("%s", c) instead of printf(c). Note that our current build slave's gcc does not enforce that yet, while newer compilers do. logging.c:338:4: warning: format not a string literal and no format arguments [-Wformat-security] ret = snprintf(buf + offset, rem, c_subsys); Change-Id: Ifa4eb8a9fab66dcd987986065351b4a06421f1ec
* logging: color the log category according to levelNeels Hofmeyr2018-01-171-1/+5
| | | | | | | | | | | | | | When log_set_use_color() is enabled, color the log category string according to the log level. The log line before and after the log category is printed in the category's configured color. ERROR and FATAL are red, NOTICE is yellow, INFO is green and DEBUG is blue. The default behavior remains unchanged; If color is enabled, the category string will now always be colored in the log level color, not the log category color, and will stand out from the rest of the line. Change-Id: I84f886ac880e9056a666bbb231ae06cbaaf65f44
* logging: color the log levelNeels Hofmeyr2018-01-171-4/+26
| | | | | | | | | | | | When log_set_use_color() is enabled, color the log level string according to the log level. The log line before and after the log level is printed in the category's color. ERROR and FATAL are red, NOTICE is yellow, INFO is green and DEBUG is blue. The default behavior remains unchanged. Change-Id: If2e52ae9ab83e538e04321c338e3fdffb2c7f9d3
* logging: add ability to log the log-level with API and vtyNeels Hofmeyr2018-01-173-0/+42
| | | | | | | | Log the log level string after the category name, if enabled. The default behavior remains unchanged. Change-Id: Ie6be365cfa6aeabdf115bff19bac198440c9adf1
* gsm0480: parse optional IEs for RELEASE COMPLETE messageVadim Yanitskiy2018-01-171-1/+5
| | | | | | | | According to GSM 04.80 section 2.5 "Release complete", a message of the mentioned type may contain optional IEs, such as Cause and Facility. Let's parse them. Change-Id: Ib8fc1f6bae472b0b264b6158f372b6cce255b222
* gsm0480: parse all SS info elements in a messageVadim Yanitskiy2018-01-171-1/+10
| | | | | | | Some SS messages (e.g. RELEASE COMPLETE) may contai multiple IEs (Information Elements). Let's parse them all. Change-Id: I20cc59c25fdbda176bcf76437174cda829518d60
* tests/ussd: fix wrong GSM 04.80 payload lengthVadim Yanitskiy2018-01-171-3/+7
| | | | | | | Previously the same length value was used for both ussd_request and interrogate_ss payloads, despite they are different. Change-Id: I90ae7c51b75dcdb9d8ee042af23d127e6db8771d
* gsm0480: correct parse_ss_info_elements() declarationVadim Yanitskiy2018-01-171-1/+1
| | | | Change-Id: I64df293188908c7eb10a61941db76656340d3a8e
* gsm0480: refactor gsm0480_decode_ss_requestVadim Yanitskiy2018-01-171-7/+14
| | | | Change-Id: Iba734db97ab516f8fce816c4e4225b97b93619f1
* gsm0480: move SS request length check to parse_ss()Vadim Yanitskiy2018-01-171-12/+11
| | | | Change-Id: I8e7ce5bd97f3a8731924264c92afb9a7183937dc
* gsm0480: pass exact GSM 04.80 payload length to parse_ss()Vadim Yanitskiy2018-01-171-4/+4
| | | | Change-Id: I9608d4ad16d7581320615c140beaac36628c31a4
* gsm0480: add specification reference to SS message typeVadim Yanitskiy2018-01-171-0/+1
| | | | Change-Id: Iff0210e995053e270939a774db33f55b22545204
* gsm0480: handle GSM0480_OP_CODE_PROCESS_USS_DATAVadim Yanitskiy2018-01-171-0/+5
| | | | Change-Id: I470290c2b544555e53cedd849b1d6a961db7b5a4
* gsm0480: handle USS_NOTIFY and USS_REQUEST with PROCESS_USS_REQVadim Yanitskiy2018-01-171-0/+2
| | | | Change-Id: If7cc6a966dfc17d37e22338ecc1f239f908a9f2e
* gsm0480: handle GSM0480_CTYPE_RETURN_RESULTVadim Yanitskiy2018-01-171-0/+82
| | | | Change-Id: I8fb2856acbbf4c53e7d53200a37bc8f79e763bcf
* gsm0480: parse GSM0480_MTYPE_FACILITY separatelyVadim Yanitskiy2018-01-171-1/+17
| | | | Change-Id: I6e029c436a50fa8c2823ea39c5d123ee701becfa
* gsm0480: handle UnstructuredSS Request with DSC != 0x0FVadim Yanitskiy2018-01-171-0/+20
| | | | | | | | | | | According to GSM 04.08, 4.4.2 "ASN.1 data types": the USSD-DataCodingScheme shall indicate use of the default alphabet using the 0x0F value. Previously, the UnstructuredSS Request messages with not default alphabet were not being handled. Let's fix this. Change-Id: I73d602f6f20b0afe7600d16bbd432069ae7be788
* gsm0480: clean up the parse_process_uss_req() codeVadim Yanitskiy2018-01-171-19/+20
| | | | | | This change reduces the degree of code nesting... Change-Id: I467f75794c5ac9df75c001245b18bbdfcfaadd88
* gsm0480: fix USSD OCTET STRING length confusionVadim Yanitskiy2018-01-172-4/+24
| | | | | | | | | | | | | | | | | | | | | | According to the GSM 04.80 (version 5.0.0) specification Annex A "Expanded ASN.1 Module "SS-Protocol", the maximum size of a USSD OCTET STRING is 160 bytes. Thus according to ETSI TS 123 038 (version 10.0.0) specification 6.1.2.3 "USSD packing of 7 bit characters", in 160 octets, it's possible to pack (160 * 8) / 7 = 182.8, that is 182 characters. The remaining 6 bits are set to zero. This change defines both mentioned values: - GSM0480_USSD_OCTET_STRING_LEN 160 - GSM0480_USSD_7BIT_STRING_LEN 182 keeping the old MAX_LEN_USSD_STRING 'as is' due to compatibility reasons. Now the new value is used for ss_request structure, while old one is still used for deprecated ussd_request structure. Change-Id: I6dead74f9ecea079752ff2400cdaf7c30187784e
* gsm0480: skip length check for 'RELEASE COMPLETE' messageSergey Kostanbaev2018-01-171-3/+10
| | | | | | | | According to GSM 04.80 Section 2.5 'Release complete' Table 2.5, the 'RELEASE COMPLETE' message payload is optional, so let's drop the length check in gsm0480_decode_ss_request() for this type. Change-Id: I63b7f8ce403169a9dbdbdb031db16693de2196d6
* Log lapd_datalink state on errorsMax2018-01-161-5/+5
| | | | | | | It's not very useful to get just the raw pointer address in case of lapd_datalink receive error. Log it's state in addition. Change-Id: Ie8c5df262312f886f509113f2707e36811df3bd5
* libosmocodec: implement ECU (Error Concealment Unit) for FRPhilipp Maier2018-01-159-3/+535
| | | | | | | | | | | When a bad GSM voice frame is received, it's being replaced by a silence frame. This may cause unpleasant audio effects. This change implements a functionality to craft a replacement frame from the last known good frame. Currently, only FR is supported, support for other codecs may be added latter. Change-Id: I06a21f60db01bfe1c2b838f93866fad1d53fdcd1
* ussd_test.c: fix rc / len debug output confusionVadim Yanitskiy2018-01-132-52/+52
| | | | | | Both len and rc values were swapped in the test output. Change-Id: Iebd82531c6ced5d16b15dad4ff4ce654c82db309
* logging-gsmtap: send only basename of source fileNeels Hofmeyr2018-01-121-0/+5
| | | | | | | | | | | GSMTAP doesn't have a lot of space for the source file name. It is better to send only the basename of the file, because only the first bit of a long path may not convey the source file at all, needing guess work from the line number. Before: "Source File Name: ../../../../src/libosmocore/src" After: "Source File Name: telnet_interface.c" Change-Id: Ie8fc9e782bcf8fa6e2e957d02e7d73c3a7c2bca8
* Deprecate gsm48_construct_ra()Max2018-01-121-1/+1
| | | | | | | | It's just a tiny wrapper around gsm48_encode_ra() with less strict type signature. Related OS#1640 Change-Id: I79d6d1133afbf32e891a6b0e3a244c6885ea9614
* Allow multiple 'log gsmtap' sinksMax2018-01-121-2/+9
| | | | | | | | Previously we've checked for existing log target with a given hostname from vty code but it was ignored inside the check so only the very first 'log gsmtap' entry was enabled while the rest were silently ignored. Change-Id: I8fd8bda9e07d403a54735da30addb742e56538a2
* log: print loginfo assertions sourceMax2018-01-121-8/+8
| | | | | | | Print which function has triggered assert_loginfo(). It's handy in debugging logging-related issues in libosmocore. Change-Id: I8418d0c431106f50aa8779cd89396f02373304ad
* TLVP_PRESENT() should not return TRUE after tlv_parse() fails.Stefan Sperling2018-01-121-4/+10
| | | | | | | | | | | | If the length provided in the patcket exceeds the buffer length, tlv_parse() returns -2 but leaves tlv.val and tlv.len initializd. Many callers of tlv_parse() do not check its return value, but rely on TLVP_PRESENT() to see if a particular TLV was parsed successfully. By clearing tlv.val and tlv.len we make it less likely that those callers will use an overlong TLV length value. Change-Id: I4dda6938e1650b4bcaac45809a4763f86f5a9794
* gsm: add gsm0808_speech_codec_type_namesNeels Hofmeyr2018-01-123-0/+20
| | | | | | | Used for logging Speech Codec List entries in osmo-bsc, during handover decision. Change-Id: Ie6418d16db333188e9bcd2b32b7216f277ae8832
* Use existing function for TLLI encodingMax2018-01-083-19/+9
| | | | | | Use bssgp_msgb_tlli_put() instead of copy-pasted code. Change-Id: I06d60566a19dcae701f8648c19fbd8db6d586f77
* Add function to properly encode RAIMax2018-01-089-53/+52
| | | | | | | | | | | | | Add gsm48_encode_ra() which takes appropriate struct as [out] parameter instead of generic buffer. Using uint8_t buffer instead of proper struct type prooved to be error-prone - see Coverity CID57877, CID57876. Old gsm48_construct_ra() is made into tiny wrapper around new function. The test output is adjusted because of the change in function return value which was constant and hence ignored anyway. Related: OS#1640 Change-Id: I31f9605277f4945f207c2c44ff82e62399f8db74
* coding: move eB adjustement to appropriate placeMax2018-01-051-7/+2
| | | | | | | | | | As a leftover from code move from OsmoBTS we have eB adjustement outside of eB check in gsm0503_tch_burst_map() which is rightfully noted by Coverity. Let's fix this by moving the adjustement under the corresponding if. Change-Id: I385cd6ffea4d13ef911910fc87c92b73809888a2 Fixes: CID57691
* Use 127.0.0.1 for GSMTAP logging by defaultMax2018-01-051-3/+3
| | | | | | | | | | | | | | | Previously the were no default value provided in case of unspecified hostname in "log gsmtap" vty config. This leads to confusing log messages because NULL was used as a hostname: Inconsistent indentation -- leading whitespace must match adjacent lines, and indentation must reflect child node levels. A mix of tabs and spaces is allowed, but their sequence must not change within a child block. Fix this by using 127.0.0.1 as default log destination and logging hostname in case of errors. Related: OS#2608 Change-Id: I58b1d4ec522af18024be2e56c9103b3db7936813
* Fix incorrect spec referenceMax2018-01-041-1/+1
| | | | | | RAI is defined in 3GPP TS 24.008 ยง 10.5.5.15 Change-Id: I484485d8c4c56b58dfecc1193bcdd48e61957422
* CTRL: Ensure peer/connection info is always printed the same wayHarald Welte2017-12-221-6/+6
| | | | | | | | | Now that we use osmo_sock_get_name() to print connection information at disconnect, let's use the same also at accept() time. Furthermore, let's call it CTRL connection everywhere for consistency. Change-Id: I33ee7d0ed853c5b2a4ae4e8ef945f8f27753cdea
* control_if: Log the disconnect of a CTRL clientHarald Welte2017-12-221-1/+4
| | | | | | | We are logging new CTRL connections at LOGL_INFO, so we should also log disconnects for symmetry. Change-Id: Id30aa76a5a3dab32d6b4121ce6fdf56d71dfc2ba
* control_if: Close control connection socket/fd on read/write == 0Harald Welte2017-12-221-1/+9
| | | | | | | | | | | When read() or write() system calls return '0' on a stream socket, it means that the connection has been closed ("EOF"). We must accordingly close this socket and remove all related state. Before this patch, every new CTRL connection would introduce a leak of both some memory/state, as well as a file descriptor :( Change-Id: I4fb70e5f123b37dece29f156c5f430c875e7cbaf
* timer: fixup whitespace issuesHarald Welte2017-12-221-3/+3
| | | | Change-Id: Ic0c8fc407a45ff4b0d3da1d3e4fdf8885b5bca9b
* logging vty: tweak general 'logging' command docNeels Hofmeyr2017-12-201-1/+1
| | | | | | 'logging' is not only for terminals, also for stderr and other log targets. Change-Id: If1ee59c7d1073502259b7d60008206ac3d8e87a3
* jenkins: add 'make V=1' for more verbose build logsNeels Hofmeyr2017-12-201-1/+1
| | | | | | | | In the logs, it is nice to see whether e.g. sanitize or -Werror args actually made it to the gcc command line. With V=1 we see the complete command invocations that would be hidden otherwise. Change-Id: Ie89b1c39489ba80fb47716f4c747f2c85960e32e
* ctrl: separate handling of GET_REPLY, SET_REPLY and TRAPNeels Hofmeyr2017-12-201-25/+28
| | | | | | | So far, error reporting just says "Trap/Reply", more accurately report 'GET REPLY', 'SET REPLY' and 'TRAP' as appropriate. Change-Id: Ic25a251502499aeda4e2952ec4190a1fa0bebb01
* ctrl: tighten CTRL input parsingNeels Hofmeyr2017-12-204-121/+144
| | | | | | | | | | | | | | | | Validate that incoming CTRL commands... - have decimal IDs, - return error on trailing characters, - have invalid characters in variable identifiers, - send detailed error messages as reply to the requestor. Adjust ctrl_test.{c,ok}, which best show the change in behavior. Message handling causes log messages on stderr; previously, stderr was empty. Add '[ignore]' in testsuite.at so that the nonempty stderr doesn't cause test failures. Change-Id: I96a9b6b6a3a5e0b80513aa9eaa727ae8c9c7d7a1
* libosmocodec: add FR bit offset definitionsPhilipp Maier2017-12-202-0/+273
| | | | | | | | This change defines the GSM FR bit positions as described in RFC 3551, which will be used by further ECU (Error Correction Unit) implementation. Change-Id: I1d0a198af0f8dd1f690b5a81f5c9eb92c43aefed