OAP:remove design doc. osmocom-authn-protocol.txt

 Osmocom Authentication Protocol design document
 is removed from libosmocore project as this
 information has been included in the User Manual.
 It is present in SGSN User Manual.

 relates to OS#1874

Change-Id: I2d4dc608622a7484e67b15f930efc76e28285045

2 files changed, 1 insertions, 251 deletions

diff --git a/Makefile.am b/Makefile.am
index 9c901ea5..185127e3 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -13,7 +13,7 @@ $(top_srcdir)/.version:
 dist-hook:
 	echo $(VERSION) > $(distdir)/.tarball-version
 
-EXTRA_DIST = git-version-gen .version doc/osmocom-authn-protocol.txt
+EXTRA_DIST = git-version-gen .version
 
 if HAVE_DOXYGEN
 
diff --git a/doc/osmocom-authn-protocol.txt b/doc/osmocom-authn-protocol.txt
deleted file mode 100644
index ad4fba0f..00000000
--- a/doc/osmocom-authn-protocol.txt
+++ /dev/null
@@ -1,250 +0,0 @@
-
-               Osmocom Authentication Protocol (OAP)
-
-1. General
-
-The Osmocom Authentication Protocol employs mutual authentication to register a
-client with a server over an IPA connection. Milenage is used as the
-authentication algorithm, where client and server have a shared secret.
-
-For example, an SGSN, as OAP client, may use its SGSN ID to register with a MAP
-proxy, an OAP server.
-
-1.1. Connection
-
-The protocol expects that a reliable, ordered, packet boundaries preserving
-connection is used (e.g. IPA over TCP).
-
-1.2. Using IPA
-
-By default, the following identifiers should be used:
-  - IPA protocol: 0xee (OSMO)
-  - IPA OSMO protocol extension: 0x06 (OAP)
-
-2. Procedures
-
-Ideal communication sequence:
-
-   Client                               Server
-     |                                    |
-     |  Register (ID)                     |
-     |----------------------------------->|
-     |                                    |
-     |  Challenge (RAND+AUTN)             |
-     |<-----------------------------------|
-     |                                    |
-     |  Challenge Result (XRES)           |
-     |----------------------------------->|
-     |                                    |
-     |  Register Result                   |
-     |<-----------------------------------|
-
-Variation "test setup":
-
-   Client                               Server
-     |                                    |
-     |  Register (ID)                     |
-     |----------------------------------->|
-     |                                    |
-     |  Register Result                   |
-     |<-----------------------------------|
-
-Variation "invalid sequence nr":
-
-   Client                               Server
-     |                                    |
-     |  Register (ID)                     |
-     |----------------------------------->|
-     |                                    |
-     |  Challenge (RAND+AUTN)             |
-     |<-----------------------------------|
-     |                                    |
-     |  Sync Request (AUTS)               |
-     |----------------------------------->|
-     |                                    |
-     |  Challenge (RAND'+AUTN')           |
-     |<-----------------------------------|
-     |                                    |
-     |  Challenge Result (XRES)           |
-     |----------------------------------->|
-     |                                    |
-     |  Register Result                   |
-     |<-----------------------------------|
-
-2.1. Register
-
-The client sends a REGISTER_REQ message containing an identifier number.
-
-2.2. Challenge
-
-The OAP server (optionally) sends back a CHALLENGE_REQ, containing random bytes
-and a milenage authentication token generated from these random bytes, using a
-shared secret, to authenticate itself to the OAP client. The server may omit
-this challenge entirely, based on its configuration, and immediately reply with
-a Register Result response. If the client cannot be registered (e.g. id is
-invalid), the server sends a REGISTER_ERR response.
-
-2.3. Challenge Result
-
-When the client has received a Challenge, it may verify the server's
-authenticity and validity of the sequence number (included in AUTN), and, if
-valid, reply with a CHALLENGE_RES message. This shall contain an XRES
-authentication token generated by milenage from the same random bytes received
-from the server and the same shared secet. If the client decides to cancel the
-registration (e.g. invalid AUTN), it shall not reply to the CHALLENGE_REQ; a
-CHALLENGE_ERR message may be sent, but is not mandatory. For example, the
-client may directly start with a new REGISTER_REQ message.
-
-2.4. Sync Request
-
-When the client has received a Challenge but sees an invalid sequence number
-(embedded in AUTN, according to the milenage algorithm), the client may send a
-SYNC_REQ message containing an AUTS synchronisation token.
-
-2.5. Sync Result
-
-If the server has received a valid Sync Request, it shall answer by directly
-sending another Challenge (see 2.2.). If an invalid Sync Request is received,
-the server shall reply with a REGISTER_ERR message.
-
-2.6. Register Result
-
-The server sends a REGISTER_RES message to indicate that registration has been
-successful. If the server cannot register the client (e.g. invalid challenge
-response), it shall send a REGISTER_ERR message.
-
-3. Message Format
-
-3.1. General
-
-Every message is based on the following message format
-
-  IEI	Info Element		Type			Pres.	Format	Length
-	Message type		4.2.1			M	V	1
-
-The receiver shall be able to receive IEs in any order. Unknown IEs shall be
-ignored.
-
-3.2.1. Register Request
-
-Client -> Server
-
-  IEI	Info Element		Type			Pres.	Format	Length
-	Message type		4.2.1			M	V	1
-  30	Client ID		big endian int (2 oct)	M	TLV	4
-
-3.2.2. Register Error
-
-Server -> Client
-
-  IEI	Info Element		Type			Pres.	Format	Length
-	Message type		4.2.1			M	V	1
-  02	Cause			GMM cause,		M	TLV	3
-				04.08: 10.5.5.14
-
-3.2.3. Register Result
-
-Server -> Client
-
-  IEI	Info Element		Type			Pres.	Format	Length
-	Message type		4.2.1			M	V	1
-
-3.2.4. Challenge
-
-Server -> Client
-
-  IEI	Info Element		Type			Pres.	Format	Length
-	Message type		4.2.1			M	V	1
-  20	RAND			octet string (16)	M	TLV	18
-  23	AUTN			octet string (16)	M	TLV	18
-
-3.2.5. Challenge Error
-
-Client -> Server
-
-  IEI	Info Element		Type			Pres.	Format	Length
-	Message type		4.2.1			M	V	1
-  02	Cause			GMM cause,		M	TLV	3
-				04.08: 10.5.5.14
-
-3.2.6. Challenge Result
-
-Client -> Server
-
-  IEI	Info Element		Type			Pres.	Format	Length
-	Message type		4.2.1			M	V	1
-  21	XRES			octet string (8)	M	TLV	10
-
-3.2.7. Sync Request
-
-Client -> Server
-
-  IEI	Info Element		Type			Pres.	Format	Length
-	Message type		4.2.1			M	V	1
-  20	AUTS			octet string (14)	M	TLV	16
-
-3.2.8. Sync Error
-
-Not used.
-
-3.2.9. Sync Result
-
-Not used.
-
-
-4. Information Elements
-
-4.1. General
-
-[...]
-
-4.2.1. Message Type
-
-  +---------------------------------------------------+
-  | 8 7 6 5 4 3 2 1                                   |
-  |                                                   |
-  | 0 0 0 0 0 1 0 0  - Register Request               |
-  | 0 0 0 0 0 1 0 1  - Register Error                 |
-  | 0 0 0 0 0 1 1 0  - Register Result                |
-  |                                                   |
-  | 0 0 0 0 1 0 0 0  - Challenge Request              |
-  | 0 0 0 0 1 0 0 1  - Challenge Error                |
-  | 0 0 0 0 1 0 1 0  - Challenge Result               |
-  |                                                   |
-  | 0 0 0 0 1 1 0 0  - Sync Request                   |
-  | 0 0 0 0 1 1 0 1  - Sync Error (not used)          |
-  | 0 0 0 0 1 1 1 0  - Sync Result (not used)         |
-  |                                                   |
-  +---------------------------------------------------+
-
-4.2.2. IE Identifier (informational)
-
-These are the standard values for the IEI.
-
-  +---------------------------------------------------------+
-  | IEI    Info Element   Type                              |
-  |                                                         |
-  | 0x02   Cause          GMM cause, 04.08: 10.5.5.14       |
-  | 0x20   RAND           octet string                      |
-  | 0x23   AUTN           octet string                      |
-  | 0x24   XRES           octet string                      |
-  | 0x25   AUTS           octet string                      |
-  | 0x30   Client ID      big endian int (2 octets)         |
-  +---------------------------------------------------------+
-
-4.2.3. Client ID
-
-     8      7      6      5      4      3      2      1
-  +-----------------------------------------------------+
-  |     |  Client ID IEI                                | octet 1
-  +-----------------------------------------------------+
-  |   Length of Client ID IE contents (2)               | octet 2
-  +-----------------------------------------------------+
-  |   Client ID number, most significant byte           | octet 3
-  +-----------------------------------------------------+
-  |   Client ID number, least significant byte          | octet 4
-  +-----------------------------------------------------+
-
-The Client ID number shall be interpreted as an unsigned 16bit integer, where 0
-indicates an invalid / unset ID.
-